Preparation and aqueous properties of starch-grafted polyacrylamide copolymers

Starch/Staerke

Volumn 61, Issue 2, 2009, Pages 81-91

  Eutamene, Mohamed ^a   Benbakhti, Abbes ^a   Khodja, Mohamed ^b   Jada, Amane ^c  

^a UNIVERSITY OF BOUMERDES   (Algeria)

^b SONATRACH   (Algeria)

^c INSTITUT DE CHIMIE DES SURFACES ET INTERFACES   (France)

Author keywords

Drilling mud; Fluid loss; Polymer rheology; Starch grafted polyacrylamide

Indexed keywords

AMIDES; AMMONIUM COMPOUNDS; AMPLITUDE MODULATION; BIODEGRADATION; BORING; COPOLYMERIZATION; COPOLYMERS; DRILLING; DRILLING FLUIDS; ELASTICITY; GRAFTING (CHEMICAL); HYDRODYNAMICS; OIL BEARING FORMATIONS; OIL WELL DRILLING; OIL WELL PRODUCTION; OIL WELLS; PLASTIC PRODUCTS; PLASTICITY; POLYMERS; POROUS MATERIALS; RHEOLOGY; VISCOSITY; WATER FILTRATION;

ACRYLAMIDE; AGING TIME; AMMONIUM SULPHATE; AQUEOUS SOLUTIONS; CELLULOSIC POLYMERS; DRILLING MUD; FILTRATE VOLUMES; FILTRATION CONTROLS; FLUID LOSS; GRAFTED STARCHES; INTRINSIC VISCOSITIES; LOW COSTS; MODIFIED STARCHES; MONOMER CONCENTRATIONS; NATIVE STARCHES; PLASTIC VISCOSITIES; POLYACRYLAMIDE COPOLYMERS; POLYMER RHEOLOGY; RHEOLOGICAL PROPERTIES; SALT CONCENTRATIONS; SHEAR RATES; SHEAR-THINNING; STARCH-GRAFTED POLYACRYLAMIDE; WATER SOLUBILITIES; WATER-BASED MUDS; WELL CONDITIONS;

STARCH;

EID: 60349128792     PISSN: 00389056     EISSN: 1521379X     Source Type: Journal    
DOI: 10.1002/star.200800231     Document Type: Article

References (40)

1. Md. Amanullah, J. R. Marsden, H. F. Shaw: An experimental study of the swelling behaviour of mudrocks in the presence of drilling mud systems. J. Can. Pet. Technol. 1997, 36, 45-50.
2. H. C. H. Gray, G. R. Darley: Composition and properties of oil-well drilling fluids, (sixth ed.), Gulf Publishing Co., Houston, 1980.
3. L. M. Wenger, C. L. Davis, J. M. Evensen, J. R. Gormly, P. J. Mankiewicz: Impact of modern deepwater drilling and testing fluids on geochemical evaluations. Org. Geochem. 2004, 35, 1527-1536.
4. R. Caenn, G. V. Chillingar: Drilling fluids: State of the art. J. Petrol. Sci. Eng. 1996, 14, 221-230.
5. Y. Cao, X. Qing, J. Sun, F. Zhou, S. Lin: Graft copolymerization of acrylamide onto carboxymethyl starch. Eur. Polym. J. 2002, 38, 1921-1924.
6. API (American Petroleum Institute). Recommended Practice for Field Testing Water-based Drilling Fluids API 13B-1 Third edition, December 2003 ANSI/API 13B-1/ISO 10414-1.
7. Md. Amanullah: Ph. D. Thesis, University of London, 1993.
8. L. M. Zhang. A review of starches and their derivatives for oilfield applications in China. Starch/Stärke 2001, 53, 401 -407.
9. M. M. Sharma, R. W. Wunderlich: The alteration of rock properties dueto interactions with drilling-fluid components. J. Petrol. Sci. Eng. 1987, 1, 127-143.
10. D. H. Wu, J.W. Zhang. Preparation of sodium carboxymethyl starches with high degree of substitution. Oilfield Chem. 1993, 10, 209-213.
11. H. Song, S. F. Zhang, X. C. Ma, D. Z. Wang, J. Z. Yang: Synthesis and application of starch -graft-poly (AM-co-AMPS) by using a complex initiation system of CS-APS. Carbohydr. Polym. 2007, 69, 189-195.
12. J. Meister: Synthesis, characterization, properties, and derivatives of poly (starch-g-(1-amidoethylene)). I. Synthesis and characterization: J. Appl. Polym. Scei. 1987, 26, 1270-1285.
13. B. Vazquez, I. Goni, M. Gurruchaga, J. Areizaga, M. Valero, G. M. Guzman: Ceric ion consumption in graft copolymerization of methacrylonitrile/ methacrylate mixtures onto amylomaize. Makromol. Chem. 1992, 193, 2189-2198.
14. V. D. Athawale, M. R Padwaldesai: Free radical graft copolymerization of methacrylamide onto agar. Eur. Polym. J. 1999, 35, 1237-1243.
15. G. F. Fanta, R. C. Burr, W. M. Doane: Graft polymerization of acrylamide and 2-acrylamido-2-methylpropanesulfonic acid onto starch. J. Appl. Polym. Sci. 1979, 24, 2015-2023.
16. V. Giri, P. K. Saboo, R. K. Samal: Graft copolymerization onto wool fibers: Grafting of acrylamide onto wool fibers initiated by potassium monopersulphate/Fe (II) redox system. J. Appl. Polym. Sci. 1990, 40, 471-483.
17. J. A. Guo: Synthesis and performance of heat-resistant and salt-tolerant filtrate loss reducer based on grafted starch. Oilfield Chem. 1996, 13, 169-171.
18. G. F. Fanta: Block and Graft Copolymerization (Ed. R. J. Ceresa) John Wiley & Sons, New York, 1973.
19. P. F. Luckham, S. Rossi: The colloidal and rheological properties of bentonite suspensions. Adv. Colloid Interface Sci. 1999, 62, 43-92.
20. T. Nyland, J. J. Azar, T. E. Becker, J. L. Lummus: Additive effectiveness and contaminant influence control on fluid loss control of water-based muds. SPE Drill Eng. 1988, 6, 195-203.
21. F. Miano, S. Carminatti, T. P. Lockhart, G. Burrafato: Zirconium additives for high temperature rheology control of dispersed muds. SPE Drill Completion 1996, 11, 147-52.
22. F. Miano, M. R. Rabaioli: Rheological scaling of montmorillonite suspensions: the effect of electrolytes and polyelectrolytes. Colloids Surf., A 1994, 84, 229-237.
23. +-montmorillonite clay suspensions, SPE 50725 presented at the SPE International Symposium of Oilfield Chemistry, Houston, TX, 16-19 Febr., 1999.
24. E. Santoyo, S. Santoyo-Gutierrez, A. Garcia, G. Espinosa, S. I. Moya: Rheological property measurement of drilling fluids used in geothermal wells. Appl. Therm. Eng. 2001, 21, 283-302.
25. R. Sohm, Th. F. Tadros: Viscoelastic properties of sodium montmorillonite (Gelwhite H) suspensions. J. Colloid Interface Sci. 1989, 132, 62-71.
26. 3 activated Kutahya Bentonite, Applied Clay Sci. 1999, 14, 319-327.
27. L. M. Zhang, D. Y. Yin: Preparation of a new lignosulfonate-based thinner: introduction of ferrous ions. Colloids Surf., A 2002, 210, 13-21.
28. S. R. Deshmukh, R. P. Singh: Drag reduction effectiveness; shear stability and biodegradation resistance of Guar gum based graft copolymers. J. Appl. Poly. Sci. 1987, 26, 1963-1975.
29. V. C. Kelessidis, R. Maglione: Modeling rheological behavior of Bentonite suspensions as Casson and Robertson-Stiff fluids using Newtonian and true shear rates in Couette viscometry. Powder Technol. 2006, 768, 134-147.
30. L. M. Zhang, D. Q. Chen: Grafting of 2-(dimethylamino) ethyl methacrylate onto potato starch using potassium permanganate/sulfuric acid initiation system. Starch/Stärke 2001, 53, 311-316.
31. S. L. Tong Lin, D. Cao: Inverse emulsion of starch-graft-polyacrylamide. Starch/Stärke 2003, 55, 222-227.
32. D. R. Biswal, R. P. Singh: Characterisation of carboxymethyl cellulose and Polyacrylamide graft copolymer. Carbohydr. Polym. 2004, 57, 379-387.
33. A. Moradi-Araghi, I. Ahmed: Polymeric Materials Encyclopaedia (Ed J. C. Salamon) CRS Press, Boca Raton, 1993.
34. M. Siddic, K. C. Tam, R. D. Jenkins: Dissolution behaviour of model alkali-soluble emulsion polymers: effects of molecular weights and ionic strength. Colloid Polym. Sci. 1999, 277, 1172-1178.
35. Y. Feng, L. Billon, B. Grassl, G. Bastiat, O. Borisov, J. François: Hydrophobically associating Polyacrylamides and their partially hydrolyzed derivatives prepared by post-modification. 2. Properties of non-hydrolyzed polymers in pure water and brine. Polymer 2005, 46, 9283-9295.
36. P. G. De Gennes: Scaling Concepts in Polymers Physics, Cornell University Press, New York, 1979.
37. P. Bera, S. K. Saha: Molecular dimension and interaction parameters of Polyacrylamide in water-dimethlsulphoxide mixtures: effect of temperature. Eur. Polym. J. 2001, 37, 2327-2333.
38. C. Charcosset, L. Choplin: Ultrafiltration of non-Newtonian fluids. J. Membrane Sci. 1996, 115, 147-160.
39. S. Krishnamoorthi, D. Mal, R. P. Singh: Characterization of graft copolymer based on Polyacrylamide and dextran. Carbohydr. Polym. 2007, 69, 371-377.
40. Y. M. Wu, D. J. Sun, B. Q. Zhang, C. H. G. Zhang: Properties of high temperature drilling fluids incorporating disodiumitaconate/acrylamide/sodium 2-Acrylamido-2-methylpropanesulfonate terpolymers as fluid-loss reducers. J. Appl. Polym. Sci. 2002, 83, 3068-3075.