Fatigue crack initiation in nickel-based superalloy René 88 DT at 593°C

Proceedings of the International Symposium on Superalloys

Volumn , Issue , 2008, Pages 589-597

  Miao, Jiashi ^a   Pollock, T M ^a   Jones, J W ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Annealing twin boundary; Crack initiation; Crystallographic facet; Fatigue; Nickel based superalloy

Indexed keywords

ANNEALING; CRACK INITIATION; CRACK PROPAGATION; CRACKING (CHEMICAL); FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; FATIGUE TESTING; INSTRUMENT TESTING; METAL FOIL; MICROSTRUCTURE; NICKEL; NICKEL ALLOYS; STRESS CORROSION CRACKING; SUPERALLOYS; ULTRASONIC IMAGING;

ANNEALING TWIN BOUNDARY; CRACK INITIATION SITES; CRYSTALLOGRAPHIC FACET; CYCLIC DEFORMATIONS; CYCLIC STRAINS; CYCLIC STRESS; FATIGUE; FATIGUE CRACK INITIATIONS; FATIGUE FAILURES; FRACTOGRAPHIC ANALYSIS; LARGE GRAINS; LONG LIVES; NICKEL-BASED SUPERALLOY; ORIENTATION IMAGING MICROSCOPIES; POLY-CRYSTALLINE; SERIAL SECTIONING; SMALL CRACK GROWTHS; SMALL CRACKS; STRAIN LOCALIZATIONS; STRESS RANGES; TRANSMISSION ELECTRONS; ULTRASONIC FATIGUE TESTING;

CRACKS;

EID: 60349111252     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (21)

1. ENSIP, Engine Structural Integrity Program Handbook, http:// engineeringwpafb.af.mil/corpusa/handbook/mh1783/mh11783.pdf, 2002. 135
2. H. Mughrabi, "Specific features and mechanisms of fatigue in the ultrahigh-cycle regime", International Journal of Fatigue, 28 (2006), 501-508.
3. S.D. Antolovich and B. Lerch. "Cyclic deformation and fatigue in Ni-base alloy", Superalloys, Supercomposites and Superceramics, ed. John K. Tien and Thomas. Caufield, (New York, NY: Academic Press, 1989), 363-411.
4. E.S. Huron and P.G. Roth, "The influence of inclusions on low cycle fatigue life in a P/M nickel-base disk superalloy", Superalloys 1996, ed. R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Natahal, T.M. Pollock and D.A. Woodford, (Warrendale, PA: TMS, 1996), 359-367.
5. A. Debussac, "Prediction of the competition between surface and internal fatigue crack initiation in PM alloys', Fatigue & Fracture of Engineering Materials and Structures, 17(11) (1994), 1319-1325.
6. F. E. Organ and M. Gell, "The effect of frequency on the elevated temperature fatigue of a nickel-base superalloy", Metallurgical Transactions, 2 (1971), 943-952.
7. C.H. Wells and C.P. Sullivan "The low-cycle fatigue characteristics of a Nickel-base superalloy at room temperature", Transactions of the ASM, 57 (1964), 841-855.
8. J.C Healy, L. Grabowski and C.J. Beevers, "Monitoring fatigue of a nickel-base superalloy at positive and negative stress ratios using an optical system", Fatigue & Fracture of Engineering Materials & Structures, 15 (1992), 309-321.
9. K. Li, N.E. Ashbaugh and A.H. Rosenberger, "Crystallographic initiation of nickel-base superalloy IN 100 at RT and 583 under low cycle fatigue conditions", Superalloys 2004, ed. K.A. Greeen, H. Harada, T.E. Howason, T.M. Pollock, R.C. Reed, J.J. Schirra and S. Walston, (Warrendale, PA: TMS, 2004), 251-258.
10. D.L.Davidson, R. G. Tryon, M. Oja, R.Matthews and K. S. Ravi Chandran, "Fatigue Crack Initiation in Waspaloy at 20 °C", Metallurgical and Materials Transactions A, 38 (2007), 2214-2225.
11. D. L. Davidson, "The effect of similarly oriented grains (a supergrain) on fatigue crack initiation characteristics of clean materials", Fourth International Conference on Very High Cycle Fatigue, ed. J. E. Allison, J.W. Jones, J.M. Larson and R.O. Ritchie, (Warrendale, PA: TMS, 2007), 23-28.
12. H. Mayer. "Fatigue crack growth and threshold measurements at very high frequencies", International Materials Reviews, 44 (1999), 1-34.
13. D.D. Krueger, R.D. Kissinger and R.G. Menzies. "Development and introduction of a damage tolerant high temperature Nickel-Base Disk Alloy, Renee 88DT", Superalloys 1992, ed. S.D.Antolovich, (Warrendale, PA: TMS-AIME, 1992), 277-286.
14. A. Shyam, C.J. Torbet, S.K. Jha, J.M. Larsen, M.J. Caton, CJ. Szczepanski, T.M. Pollock, J.W. Jones. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine materials. Superalloys 2004, ed. K.A. Greeen, H. Harada, T.E. Howason, T.M. Pollock, R.C. Reed, J.J. Schirra and S. Walston, (Warrendale, PA: TMS, 2004), 259-268.
15. Jiashi Miao, T.M. Pollock, and J.W. Jones."Very high cycle fatigue behavior of nickel-based superalloy René 88DT at 593 °C", Fourth International Conference on Very High Cycle Fatigue, ed. J. E. Allison, J.W. Jones, J.M. Larson and R.O. Ritchie, (Warrendale, PA: TMS, 2007), 445-450
16. M.J. Caton, S.K. Jha, A.H. Rosenberger and J.M. Larson. "Divergence of mechanisms and the effect on the fatigue life variability of Rene 88DT', Superalloys 2004, ed. K.A. Greeen, H. Harada, T.E. Howason, T.M. Pollock, R.C. Reed, J.J. Schirra and S. Walston, (Warrendale, PA: TMS, 2004), 305-312.
17. N. Thompson, N. Wadsworth and N. Louat, "The origin of fatigue fracture in copper", Philosophical Magazine, 1 (1956), 113-126.
18. R.C. Boettner, JA. McEvily, Jr and Y.C. Liu, "On the formation of fatigue cracks at twin boundaries", Philosophical magazine, 10 (1964), 95-106
19. A. Heinz and P. Neumann, "Crack initiation during high cycle fatigue of an austenitic steel", Acta Metallurgica et Materialia, 38 (1990), 1933-1940.
20. T.C. Lee, I.M. Robertson, and H.K. Birnbaum, "An In Situ transmission electron microscope deformation study of the slip transfer mechanisms in metals" Metallurgical and Materials Transactions A, 21 (1990), 2437-2447.
21. L. Lanes and C. Laird, "the role of annealing twin boundaries in the cyclic deformation of f.c.c materials". Materials science and engineering A, 157 (1992), 21-27.