Thermomechanical response of a powder metallurgy Ti-6Al-4V alloy modified with 2.9 pct boron

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 13, 2005, Pages 845-857

  Bhat, Radhakrishna B ^a   Tamirisakandala, Seshacharyulu ^b   Miracle, Daniel B ^c   Ravi, Vilupanur A ^d  

^a Materials and Processes Division   (United States)

^b US Institute of Navigation   (United States)

^c AIR FORCE RESEARCH LABORATORY   (United States)

^d CALIFORNIA STATE POLYTECHNIC UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM POWDER METALLURGY; BORON; BORON COMPOUNDS; CAVITATION; COMPRESSION TESTING; DEFORMATION; GRAIN BOUNDARIES; GRAIN BOUNDARY SLIDING; GRAIN SIZE AND SHAPE; HOT WORKING; HYDRODYNAMICS; METAL WORKING; METALLURGY; PHASE INTERFACES; POWDER METALLURGY; POWDERS; THERMOMECHANICAL TREATMENT; TITANIUM ALLOYS;

ADIABATIC SHEAR BANDING; DAMAGE MECHANISMS; DEFORMATION BEHAVIORS; FINE GRAINS; FLOW STRESS DATUM; HIGH STRAIN RATES; HOT COMPRESSION TESTS; INTERFACE SLIDING; LOW STRAIN RATES; MATERIALS MODELING; MICRO-STRUCTURAL; MICROSTRUCTURAL DEFORMATIONS; PARTICLE FRACTURES; PHASE FIELDS; TEMPERATURE RANGES; THERMO MECHANICALS; TI-6 AL-4V ALLOYS; TI-6A1-4V;

STRAIN RATE;

EID: 60149092026     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-1014-2     Document Type: Article

References (33)

1. S. Mall, T. Fecke, and M.A. Foringer: In Titanium Matrix Composites: Mechanical Behavior, S. Mall and T. Nicholas, eds., Technomic Pub. Co., Lancaster, PA, 1998, pp. 1-22.
2. D.B. Miracle: In ASM Handbook: Composites, D.B. Miracle and S.L. Donaldson, eds., ASM INTERNATIONAL, Materials Park, OH, 2001, vol. 21, pp. 1043-49.
3. S.R. Gunawardena, S. Jansson, and F.A. Leckie: Acta Metall. Mater., 1993, vol. 41, pp. 3147-56.
4. T.M.T. Godfrey, P.S. Goodwin, and C.M. Ward-Close: Adv. Eng. Mater., 2000, vol. 2, pp. 85-91.
5. K.S. Ravichandran, and D.B. Miracle: J. Met., 2004, vol. 56, (5), p. 32
6. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1-16
7. T. Saito, T. Furuta, and T. Yamaguchi: Proc. 1994 MRS Fall Meeting, F.H. Froes and J. Storer, eds., MRS, Rosemont, IL, 1994, pp. 33-44.
8. R.J. Lederich, W.O. Soboyejo, and T.S. Srivatsan: J. Met., 1994, vol. 46, pp. 68-71.
9. C.F. Yolton, and J.H. Moll: In Titanium '95 Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.N. Flower, eds., IOM, London, 1996, vol. III, pp. 2755-62.
10. S. Ranganath, and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927-35.
11. T.M.T. Godfrey, P.S. Goodwin, and C.M. Ward-Close: Mater. Sci. Technol., 2000, vol. 16, pp. 753-58.
12. R. Banerjee, P.C. Collins, A. Genc, and H.L. Fraser: Mater. Sci. Eng. A, 2003, vol. A358, pp. 343-49.
13. T. Saito: Adv. Performance Mater., 1995, vol. 2, pp. 121-44.
14. R.S. Mishra, T.R. Bieler, and A.K. Mukherjee: Acta Mater., 1997, vol. 45, pp. 561-68.
15. B.V.R. Bhat, Y.R. Mahajan, and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 629-39.
16. Hot Working Guide: A Compendium of Processing Maps, Y.V.R.K. Prasad and S. Sasidhara, eds, ASM INTERNATIONAL, Materials Park, OH, 1997.
17. S. Tamirisakandala, B.V. Vedam, and R.B. Bhat: J. Mater. Eng. Performance, 2003, vol. 12, pp. 661-73.
18. Phase Diagrams of Binary Titanium Alloys, J. Murray, ed., ASM, Metals Park, OH, 1987, p. 33.
19. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986, pp. 73-76.
20. J.J. Jonas, C.M. Sellars, and W.J. Tegart: Metall. Rev., 1969, vol. 14, pp. 1-24.
21. Y.V.R.K. Prasad, and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243-58.
22. M.F. Ashby: Phil. Mag., 1966, vol. 14, pp. 1157-65.
23. M.W. Mahoney: In Materials Properties Handbook: Titanium Alloys, R. Boyer, G. Welsch, and E. Collings eds, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 1101-09.
24. R.C. Koeller, and R. Raj: Acta. Metall., 1978, vol. 26, pp. 1551-58.
25. H.J. Frost, and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, Oxford, NY, 1982, pp. 43-52.
26. M.E. Hyman, C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Metall. Trans. A, 1989, vol. 20A. pp. 1847-59.
27. N.E. De Reca, and C.M. Libanati: Acta Metall., 1968, vol. 16, pp. 1297-305.
28. C. Schuh, and D.C. Dunand: Int. J. Plasticity, 2001, vol. 17, pp. 317-40.
29. B.V.R. Bhat, Y.R. Mahajan, H.M. Roshan, and Y.V.R.K. Prasad: Mater. Sci. Eng., 1994, vol. A189, pp. 137-45.
30. A. Arieli, and A.K. Mukherjee: Metall. Trans. A., 1982, vol. 13A, pp. 717-32.
31. R. Kaibyshev, I. Kazakulov, D. Gromov, F. Musin, D.R. Lesuer, and T.G. Nieh: Scripta Mater, 2001, vol. 44, pp. 2411-17.
32. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. Am. Soc. Met., 1969, vol. 62, pp. 155-79.
33. S. Liao, and J. Duffy: J. Mech. Phys. Solids, 1998, vol. 46. pp. 2201-31.