Hip stem fatigue test prediction

International Journal of Fatigue

Volumn 31, Issue 5, 2009, Pages 894-905

  Ploeg, Heidi Lynn ^a   Bürgi, Maja ^b   Wyss, Urs P ^c  

^a Wisconsin Electric Machines and Power Electronics Consortium   (United States)

^b ZURICH UNIVERSITY OF APPLIED SCIENCES   (Switzerland)

^c Zimmer GmbH   (Switzerland)

Author keywords

Fatigue modelling; Finite elements; Hip stem; Strain controlled fatigue; Titanium alloys

Indexed keywords

FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; GAGES; IMPLANTS (SURGICAL); METALLIC COMPOUNDS; STEEL BRIDGES; TENSILE STRENGTH; TESTING; TITANIUM; TITANIUM ALLOYS;

FATIGUE LIVES; FATIGUE MODELLING; FATIGUE STRENGTHS; FATIGUE TESTS; FINITE ELEMENTS; FINITE-ELEMENT ANALYSIS; HIP STEM; INVESTIGATING EFFECTS; LOW STRESS; MATERIAL FATIGUES; MATERIAL PROPERTIES; PREDICTION METHODS; STRAIN CONTROLLED FATIGUE; STRAIN GAUGES; STRESS LIVES; VARIABLE AMPLITUDE LOADINGS;

FATIGUE TESTING;

EID: 60049088250     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2008.10.005     Document Type: Article

References (68)

1. Chao J., and López V. Failure analysis of a Ti6Al4V cementless hip prosthesis. Eng Fail Anal 14 (2007) 822-830
2. Stea S., Bordini B., Sudanese A., and Toni A. Registration of hip prosthesis at the Rizzoli institute, 11 years' experience. Acta Orthop Scand Suppl 305 (2002) 40-44
3. Lange G. Versagensfälle permanenter und temporärer Implantate infolge zyklisch-mechanischer und korrosiver Beanspruchung. Tagung des DVM-Arbeitskreises Biowerkstoffe. Mechanische Eigenschaften von Implantatwerkstoffen vol. 1 (1998), Deutscher Verband für Materialforschung und Prüfung e.V., Berlin 27-39
4. Woolson S.T., Milbauer J.P., Bobyn J.D., et al. Fatigue fracture of a forged cobalt-chromium-molybdenum femoral component inserted with cement. J Bone Joint Surg [Am] 79A 12 (1997) 1842-1848
5. Unwin P.S., Cobb J.P., and Walker P.W. Distal femoral arthroplasty using custom-made prostheses, the first 218 cases. J Arthroplasty 8 3 (1993) 259-268
6. ISO 7206/3. Determination of endurance properties of stemmed femoral components without application of torsion, Implants for surgery - partial and total hip joint prostheses. Geneva (CH): International Standards Organisation; 1987.
7. ISO 7206/4. Determination of endurance properties of stemmed femoral components with application of torsion, Implants for surgery - partial and total hip joint prostheses. Geneva (CH): International Standards Organisation; 2002.
8. ISO 7206/7. Endurance performance of stemmed femoral components without application of torsion, Implants for surgery - partial and total hip joint prostheses. Geneva (CH): International Standards Organisation; 1993.
9. ISO 7206/8. Endurance performance of stemmed femoral components with application of torsion. Geneva (CH): International Standards Organisation; 1995.
10. Paul J.P. Strength requirements for internal and external prostheses. J Biomech 31 (1999) 381-393
11. Semlitsch M., Panic B., Weber H., et al. Comparison of the fatigue strength of femoral prosthesis stems made of forged Ti-6A-V and cobalt-base alloys. In: Luckey H.A., and Kubli Jr. F. (Eds). STP 796, titanium alloys in surgical implants (1983), American Society for Testing and Materials, Philadelphia 120-135
12. Akay M., and Aslan N. An estimation of fatigue life for a carbon fibre/polyesther ketone hip joint prosthesis. Proceedings of the institute of mechanical engineers part H. J Eng Med 209 (1995) 93-103
13. Baleani M., Cristofolini L., and Viceconti M. Endurance testing of hip prostheses: a comparison between the load fixed in ISO 7206 standard and physiological loads. Clin Biomater 14 (1999) 339-345
14. Humphreys P.K., Orr J.F., and Bahrani A.S. Testing of total hip replacements: endurance tests and stress measurements. Part 2: stress measurements. Proceedings of the Institute of Mechanical Engineers part H. J Eng Med 204 (1990) 35-41
15. Liao K., and Reifsnider K.L. Multiaxial fatigue and life prediction of composite hip prosthesis. In: McDowell D.L., and Ellis R. (Eds). STP 1191 advances in multiaxial fatigue (1993), American Society for Testing and Materials, Philadelphia (PA) 429-450
16. Mathias K.J., Leahy J.C., Heaton A., et al. Hip joint prosthesis design: effect of stem introducers. Med Eng Phys 20 (1998) 620-624
17. Ploeg H.L., Wevers H.W., Wyss U.P., et al. Finite element analysis and fatigue test prediction applied to the standard fatigue testing of hip stems. In: Middleton J., Pandi G., and Jones M. (Eds). Computer methods in biomechanics and biomedical engineering (1998), Gordon and Breach Publishing Group, London, UK 139-146
18. Ploeg H.L., Wevers H.W., Wyss U.P., et al. Life prediction techniques applied to the standard fatigue testing of hip stems. In: Edwards J.H., Flewitt P.E.J., Gasper B.C., McLarty K.A., Stanley P., and Tomkins B. (Eds). Life assessment and life extension of engineering plant. Structures and components (1996), Chameleon Press Ltd., London 617-626
19. Viceconti M., McNamara B.P., Toni A., et al. FEM analysis of the static stresses induced in a THR femoral component during a standardised fatigue test. In: Middleton J., Jones M., and Pandi G. (Eds). Second international symposium on computer methods in biomechanics and biomedical engineering (1996), Gordon and Breach Publishing Group, London 57-66
20. Gustavson L., Crippen T., and Dumbleton J.H. The properties of porous coated vitallium alloy. In: Buchhorn G.H., and Willert H.G. (Eds). Technical principles. Design and safety of joint implants (1994), Hogrefe & Huber Publishers, Seattle 310-316
21. Smith T. The effect of plasma-sprayed coatings on the fatigue of titanium alloy implants. JOM (J Met) February (1994) 54-56
22. Kelman DC, Takeuchi MJ, Smith TS. Effect of plasma sprayed coatings on high cycle fatigue. 17th Annual meeting of the society for biomaterials, vol. 17; 1991. p. 290.
23. Kohn D.H., and Ducheyne P. A parametric study of the factors affecting the fatigue strength of porous coated Ti-6Al-4V implant alloy. J Biomed Mater Res 24 (1990) 1483-1501
24. Cook S.D., Thongpreda N., Anderson R.C., et al. The effect of post-sintering heat treatments on the fatigue properties of porous coated Ti-6Al-4V. J Biomed Mater Res 22 (1988) 287-302
25. Yue S., Pilliar R.M., and Weatherly G.C. The fatigue strength of porous-coated T-6%Al-4%V implant alloy. J Biomed Mater Res 18 (1984) 1043-1058
26. Ploeg H.L., Wevers H.W., Wyss U.P., and Bürgi M. Fatigue strength testing of hip stems with statistical analysis. Bio-Med Mater Eng 9 4 (1999) 243-263
27. F136-02a. Standard specification for wrought titanium 6aluminum-4vanadium ELI (extra low interstitial) alloy for surgical implant applications. In: Annual book of ASTM standards section 13: medical devices 13.01. Philadelphia (PA): American Society for Testing and Materials; 1999.
28. In: Boyer R., Welsch G., and Collings E.W. (Eds). Materials properties handbook: titanium alloys (1994), ASM International, Materials Park (OH)
29. Saha S., and Pal S. Mechanical properties of bone cement: a review. J Biomed Mater Res 18 (1984) 435-462
30. Mann K.A., Bartel D.L., Wright T.M., et al. Mechanical characteristics of the stem-cement interface. J Orthop Res 9 (1991) 798-808
31. Keller J.C., Lautenschlager E.P., Marshal G.W., et al. Factors affecting surgical alloy/bone cement interface adhesion. J Biomed Mater Res 14 (1980) 639-651
32. Raab S., Ahmed A.M., and Provan J.W. The quasistatic and fatigue performance of the implant/bone-cement interface. J Biomed Mater Res 15 (1981) 159-182
33. max mit elektrische Tastschnittgeräten. Berlin (DE): Begriffe, Messbedingungen, Deutsches Institut für Normung e.V; 1990.
34. Manson S.S. Fatigue: a complex subject - some simple approximations. Exp Mech 5 (1965) 193-226
35. Morrow J.D. Cyclic plastic strain energy and fatigue of metals. Internal friction damping and cyclic plasticity (1965), American Society for Testing and Materials, Philadelphia 45-87
36. Coffin L.F. A study of the effects of cyclic thermal stresses on a ductile metal. Trans Am Soc Mech Eng 76 (1954) 931-950
37. Bäumel A., and Seeger T. Materials data for cyclic loading [supplement 1] (1990), Elsevier Science Publishers, Amsterdam
38. Boller Chr., and Seeger T. Materials data for cyclic loading, part D: aluminium and titanium alloys (1987), Elsevier Science Publishers, Amsterdam
39. STP 91-A. A guide for fatigue testing and the statistical analysis of fatigue data (1963), American Society for Testing and Materials, Philadelphia (PA)
40. E739-91. Standard practice for statistical analysis of linear or linearized stress-life (S-N) and strain-life (E-N) fatigue data. Annual book of ASTM standards section 3: metals test methods and analytical procedures 3.01 (1999), American Society for Testing and Materials, Philadelphia (PA)
41. Roessle ML, Fatemi A, Khosrovaneh AK. Variation in cyclic deformation and strain-controlled fatigue properties using different curve fitting and measurement techniques 1999-01-0364. SAE technical paper series. Warrendale (PA): SAE International; 1999.
42. Johnson L.G. The median ranks of sample values in their population with an application to certain fatigue studies. Indust Math 2 (1951) 1-9
43. Weibull W. A statistical distribution function of wide applicability. J Appl Mech September (1951) 293-297
44. Weibull W. A statistical representation of fatigue failures in solids vol. 27 (1949), Transactions of the Royal Institute of Technology Stockholm, Sweden
45. Castillo E., Fernández Canteli A., Esslinger V., et al. Statistical model for fatigue analysis of wires, strands and cables. Int Assoc Bridge Struct Eng (IABSE) Periodica 1 (1985) 1-40
46. Spindel J.E., and Haibach E. The method of maximum likelihood applied to the statistical analysis of fatigue data. Int J Fatigue 1 (1979) 81-88
47. Basquin O.H. The exponential law of endurance tests. Am Soc Test Mater Proc 10 (1910)
48. Ramberg W, Osgood WR. Description of stress-strain curves by three parameters. National advisory committee for aeronautics, Technical report technical note no. 402, 1943.
49. Neuber H. Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain laws. Trans Am Soc Mech Eng, J Appl Mech 28 (1961) 544-550
50. Massing G. Eigenspannungen und Verfestigung beim Messing. In: Proceedings of the second international congress of applied mechanics. Zürich: Orell Füssliverlag; 1926. p. 332-5.
51. Bauschinger J. On the change of the position of elastic limit of iron and steel under cyclic variation of stress. Mitteilung Mech - Tech Lab (München) 13 1 (1886)
52. Smith K.N., Watson P., and Topper T.H. A stress-strain function for the fatigue of metals. J Mater IMLSA 5 4 (1970) 767-778
53. Sendeckyj G.P. History of constant life diagrams. In: Soboyejo W.O., and Srivatsan T.S. (Eds). High cycle fatigue of structures (1997), The Minerals, Metals & Materials Society, Warrendale 95-107
54. Johnson J.B. The materials of construction. 1st ed. (1897), John Wiley and Sons, New York p. 537-47
55. Goodman J. Mechanics applied to engineering. 1st ed. (1899), Longmans, Green and Co., London p. 453-6
56. Chiu S.S., Eftis J., and Jones D.L. Prediction of fatigue life with and without hold times using Chaboche viscoplastic constitutive theory. J Eng Mater Technol 112 (1990) 188-197
57. Viceconti M., Toni A., and Giunti A. Influence of the embedding media on the results of standard in vitro fatigue tests on femoral components. Proceedings of the Institute of Mechanical Engineers part H. J Eng Med 208 (1994) 131-137
58. Kaddick C., Ascherl R., Siebels W., et al. Mechanische Sicherheit von Hüftgelenkendoprothesen-schäften aus Kohlenstoffaserverbundwerkstoff. Z Orthop 134 (1996) 111-116
59. Viceconti M., Toni A., and Giunti A. Effects of some technological aspects on the fatigue strength of a cementless hip stem. J Biomed Mater Res 29 (1995) 875-881
60. Humphreys P.K., Orr J.F., and Bahrani A.S. Testing of total hip replacements: endurance tests and stress measurements. Part 1: endurance tests. Proceedings of the Institute of Mechanical Engineers part H. J Eng Med 204 (1990) 29-34
61. Kunze E. Fatigue and corrosion fatigue testing of hip joint endoprostheses in air and in NaCl-solution. Werkstoffe Korrosion 38 (1987) 757-762
62. Styles C.M., Evans S.L., and Gregson P.J. Development of fatigue lifetime predictive test methods for hip implants: part I. Test methodology. Biomaterials 19 (1998) 1057-1065
63. Imam M.A., Fraker A.C., and Gilmore C.M. Corrosion fatigue of 316L stainless steel, Co-Cr-Mo alloy and ELI Ti-6Al-4V. In: Syrett B.C., and Acharya A. (Eds). STP 684, corrosion and degradation of implant materials (1983), American Society for Testing and Materials, Philadelphia (PA) 128-143
64. Fraker A.C., Ruff A.W., Sung P., et al. Surface preparation and corrosion behaviour of titanium alloys for surgical implants. In: Luckey H.A., and Kubli Jr. F. (Eds). STP 796, titanium alloys in surgical implants (1983), American Society for Testing and Materials, Philadelphia (PA) 206-219
65. Solar R.J. Corrosion resistance of titanium surgical implant alloys: a review. In: Syrett B.C., and Acharya A. (Eds). STP 684, corrosion and degradation of implant materials (1983), American Society for Testing and Materials, Philadelphia (PA) 259-273
66. Gilbert J.L., and Piehler H.R. Grain egression: a new mechanism of fatigue-crack initiation in Ti-6Al-4V. Metall Trans A 20 (1989) 1715-1725
67. Manero J.M., Gil F.J., and Planell J.A. Effect of saline solution environment on the cyclic deformation of Ti-6Al-4V alloy. J Mater Med 7 (1996) 131-134
68. Cornet A., Muster D., and Jaeger J.H. Fatigue-corrosion of endoprosthesis titanium alloys. Biomater Med Dev Artif Organs 7 1 (1979) 155-167