Adjoint parameter sensitivity analysis for the hydrodynamic lattice Boltzmann method with applications to design optimization

Computers and Fluids

Volumn 38, Issue 4, 2009, Pages 910-923

  Pingen, Georg ^a   Evgrafov, Anton ^b   Maute, Kurt ^c  

^a UNIVERSITY OF COLORADO   (United States)

^b TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^c UNIVERSITY OF COLORADO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

APPLICATIONS; BOUNDARY CONDITIONS; CONSTRAINED OPTIMIZATION; DROP FORMATION; FLOW OF FLUIDS; FLUID DYNAMICS; OPTIMIZATION; SENSITIVITY ANALYSIS; STRUCTURAL OPTIMIZATION; TOPOLOGY;

ADJOINT; ANALYTICAL SENSITIVITY ANALYSIS; BOLTZMANN METHODS; DESIGN OPTIMIZATIONS; FINITE DIFFERENCES; GEOMETRY OPTIMIZATIONS; NO-SLIP BOUNDARY CONDITIONS; NUMERICAL EXAMPLES; OPTIMAL SOLUTIONS; PARAMETER SENSITIVITIES; POROSITY MODELS; POROUS BOUNDARIES; SINGLE RELAXATIONS; SOLID BOUNDARIES; SOLUTION STRATEGIES; TOPOLOGY OPTIMIZATIONS; VOLUME CONSTRAINTS;

SHAPE OPTIMIZATION;

EID: 59849097718     PISSN: 00457930     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compfluid.2008.10.002     Document Type: Article

References (53)

1. Jameson A. Aerodynamic design via control theory. J Sci Comput 3 (1988) 233-260
2. Gunzburger M.D. Perspectives in flow control and optimization, advance in design and control (2003), Society for Industrial and Applied Mathematics (SIAM), Philadelphia (PA)
3. Mohammadi B., and Pironneau O. Applied shape optimization for fluids. Numerical mathematics and scientific computation (2001), Oxford University Press, New York
4. Borrvall T., and Petersson J. Topology optimization of fluids in Stokes flow. Int J Numer Methods Fluids 41 1 (2003) 77-107
5. Gersborg-Hansen A., Sigmund O., and Haber R. Topology optimization of channel flow problems. Struct Multidiscip Optim 30 3 (2005) 181-192
6. Wiker N. Topology optimization in fluid flow problems, Ph.D. thesis, Department of Mechanical Engineering, Linköping University; 2006.
7. Thellner M. Multi-parameter topology optimization in continuum mechanics, Ph.D. thesis, Department of Mechanical Engineering, Linköping University; 2005.
8. Guest J.K., and Prévost J.H. Topology optimization of creeping fluid flows using a Darcy-Stokes finite element. Int J Numer Methehods Eng 66 (2006) 461-484
9. Guest J.K., and Prévost J.H. Design of maximum permeability material structures. Comput Meth Appl Mech Eng 196 (2007) 1006-1017
10. Evgrafov A. On the limits of porous materials in the topology optimization of Stokes flows. Appl Math Opt 52 3 (2005) 263-277
11. Evgrafov A. Topology optimization of slightly compressible fluids. ZAMM Z Angew Math Mech 86 1 (2005) 46-62
12. Pingen G., Evgrafov A., and Maute K. Topology optimization of flow domains using the lattice Boltzmann method. Struct Multidiscip Optim 34 (2007) 507-524
13. Evgrafov A., Pingen G., and Maute K. Topology optimization of fluid problems by the lattice Boltzmann method. In: Bendsøe M.P., Olhoff N., and Sigmund O. (Eds). IUTAM symposium on topological design optimization of structures, machines and materials: status and perspectives (2006), Springer, Netherlands 559-568
14. Pingen G, Evgrafov A, Maute K. 3D topology optimization of fluids by the lattice Boltzmann method. In: Proceedings of the 11th AIAA/ISSMO multidisciplinary analysis and optimization conference, Portsmouth; 2006. Paper AIAA-2006-7108.
15. Pingen G, Evgrafov A, Maute K. Towards the topology optimization of fluid-structure interaction problems with immersed boundary techniques. In: Proceedings of the 2006 NSF DMII conference, St. Louis; 2006.
16. Kleiber M., Antúnez H., Hien T.D., and Kowalczyk P. Parameter sensitivity in nonlinear mechanics: theory and finite element computations (1997), Wiley, New York
17. Tekitek M.M., Bouzidi M., Dubois F., and Lallemand P. Adjoint lattice Boltzmann equation for parameter identification. Comput Fluids 35 (2006) 805-815
18. Allen M, Weickum G, Maute K. Application of reduced order models for the stochastic design optimization of dynamic systems. In: Proceedings of the 10th AIAA/ISSMO multidisciplinary analysis and optimization conference, Albany, NY; 2004. Paper 2004-4614.
19. Lallemand P., and Luo L.-S. Theory of the lattice Boltzmann method: dispersion, dissipation, isotropy, Galilean invariance, and stability. Phys Rev E 61 (2000) 6546-6562
20. McNamara G.R., and Zanetti G. Use of the Boltzmann equation to simulate lattice-gas automata. Phys Rev Lett 61 20 (1988) 2332-2335
21. Succi S. The lattice Boltzmann equation: for fluid dynamics and beyond. Numerical mathematics and scientific computation (2001), Oxford University Press, Oxford
22. Chen S., and Doolen G.D. Lattice Boltzmann method for fluid flows. Annu Rev Fluid Mech 30 (1998) 329-364
23. He X., and Luo L.-S. A priori derivation of the lattice Boltzmann equation. Phys Rev E 55 6 (1997) 6333-6336
24. Yu D, Mei R, Shyy W. A unified boundary treatment in lattice Boltzmann method. In: Proceedings of the 41st aerospace sciences meeting and exhibit; 2003. Paper AIAA2003-0953.
25. Yu D., Mei R., and Shyy W. Improved treatment of the open boundary in the method of lattice Boltzmann equation. Prog Comput Fluid Dyn 5 1/2 (2005) 3-12
26. Mittal R., and Iaccarino G. Immersed boundary methods. Annu Rev Fluid Mech 37 (2005) 239-261
27. Spaid M.A.A., and Phelan F.R. Lattice Boltzmann methods for modelling microscale flow in fibrous porous media. Phys Fluids 9 9 (1997) 2468-2474
28. Ladd A.J.C. Numerical simulation of particular suspensions via a discrete Boltzmann equation. Part 1. Theoretical foundation. J Fluid Mech 271 (1994) 285-309
29. Behrend O. Solid-fluid boundaries in particle suspension simulations via the lattice Boltzmann method. Phys Rev E 51 1 (1994) 1164-1175
30. Cornubert R., d'Humières D., and Levermore D. A Knudsen layer theory for lattice gases. Physica D 47 (1991) 241-259
31. Gallivan M.A., Noble D.R., Georgiadis J.G., and Buckius R.O. An evaluation of the bounce-back boundary condition for lattice Boltzmann simulations. Int J Numer Methods Fluids 25 (1997) 249-263
32. d'Humières D., Ginzburg I., Krafczyk M., Lallemand P., and Luo L.-S. Multiple-relaxation time lattice Boltzmann models in three dimensions. Phil Trans R Soc Lond A 360 (2002) 437-451
33. Sukop M.C., Daniel J., and Thorne T. Lattice boltzmann modeling: an introduction for geoscientists and engineers (2006), Springer, Berlin
34. Ziegler D.P. Boundary conditions for lattice Boltzmann simulations. J Stat Phys 71 5/6 (1993) 1171-1177
35. Yang Z. Analysis of lattice Boltzmann boundary conditions, Ph.D. thesis, Department of mathematics and statistics, Universität Konstanz; 2007.
36. Filippova Q., and Hänel D. Grid refinement for lattice-BGK models. J Comput Phys 147 (1998) 219-228
37. Bouzidi M., Firdaouss M., and Lallemand P. Momentum transfer of a lattice Boltzmann fluid with boundaries. Phys Fluids 13 11 (2001) 3452-3459
38. Gill P.E., Murray W., and Saunders M.A. SNOPT: an SQP algorithm for large-scale constrained optimization. SIAM J Opt 12 4 (2002) 979-1006
39. Evgrafov A., Pingen G., and Maute K. Topology optimization of fluid domains: kinetic theory approach. Zamm 88 2 (2008) 129-141
40. Li X.S., and Demmel J.W. Superlu_dist: a scalable distributed-memory sparse direct solver for unsymmetric linear systems. ACM Trans Math Software 29 2 (2003) 110-140
41. Pingen G., Evgrafov A., and Maute K. A parallel Schur complement solver for the solution of the adjoint steady state lattice Boltzmann equations: application to design optimization. Int J Comput Fluid D 22 7 (2008) 457-464
42. Geller S., Krafczyk M., Tölke J., Turek S., and Hron J. Benchmark computations based on lattice-Boltzmann, finite element and finite volume methods for laminar flows. Comput Fluids 35 (2006) 888-897
43. Lai Y.G., Lin C.-L., and Huang J. Accuracy and efficiency study of lattice Boltzmann method for steady-state flow simulations. Numer Heat Trans B 39 (2001) 21-43
44. Breuer M., Bernsdorf J., Zeiser T., and Durst F. Accurate computations of the laminar flow past a square cylinder based on two different methods: lattice-Boltzmann and finite-volume. Int J Heat Fluid Flow 21 (2000) 186-196
45. Noble D.R., Georgiadis J.G., and Buckius R.O. Comparison of accuracy and performance for lattice Boltzmann and finite difference simulations of steady viscous flow. Int J Numer Methods Fluids 23 (1996) 1-18
46. Kocak S., and Akay H.U. Parallel Schur complement method for large-scale systems on distributed memory computers. Appl Math Model 25 (2001) 873-886
47. Pingen G, Evgrafov A, Maute K. A GMRES Schur complement solution of the lattice Boltzmann sensitivity equations for large-scale topology optimization. In: Proceedings of 2008 NSF engineering research and innovation conference, Knoxville, TN; 2008.
48. Aage N., Poulsen T.H., Gersborg-Hansen A., and Sigmund O. Topology optimization of large scale Stokes flow problems. Struct Multidiscip Optim 35 2 (2008) 175-180
49. Bendsøe M.P., and Sigmund O. Topology optimization: theory, methods, and applications (2003), Springer, Berlin
50. Zhou M., and Rozvany G.I.N. The COC algorithm. Part II. Topological, geometry, and generalized shape optimization. Comput Methods Appl Mech Eng 89 (1991) 197-224
51. Rozvany G.I.N., Zhou M., and Birker T. Generalized shape optimization without homogenization. Struct Opt 4 (1992) 250-252
52. Bendsøe M.P. Optimal shape design as a material distribution problem. Struct Opt 1 (1989) 193-202
53. Rozvany G.I.N. Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics. Struct Multidiscip Optim 21 (2001) 90-108