3D modelling of plug failure in resistance spot welded shear-lab specimens (DP600-steel)

International Journal of Fracture

Volumn 153, Issue 2, 2008, Pages 125-139

  Nielsen, Kim Lau ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Dual phase steel; Ductile damage; Gurson model; RSW; Shear lab test

Indexed keywords

COALESCENCE; ELECTRIC WELDING; FAILURE ANALYSIS; HEAT AFFECTED ZONE; LABORATORIES; PLASTIC FLOW; QUALITY ASSURANCE; RESISTANCE WELDING; SPOT WELDING; STEEL; TENSILE STRENGTH; TENSILE TESTING; WELDING; WELDS;

DUAL PHASE STEEL; DUCTILE DAMAGE; GURSON MODEL; RSW; SHEAR-LAB TEST;

THREE DIMENSIONAL;

EID: 59749095007     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-008-9305-4     Document Type: Article

References (45)

1. Ahmad E, Tanvir M, Kanwar Liaqat A, Akhter JI (2000) Effect of microvoid formation on the tensile properties of dual-phase steel. J Mater Eng Perform 9: 306-310
2. Anastassiou M, Babbit M, Lebrun JL (1990) Residual stresses and microstructure distribution in spot-welded steel sheets: Relation with fatigue behaviour. Mater Sci Eng A 125: 141-156
3. AWS (2000) Recommended practices for resistance welding. AWS - American Welding Society, C1.1M/C1.1:2000
4. Budiansky B (1964) Remarks on theories of solid and structural mechanics. Harvard University, SIAM, pp 77-83
5. Chu CC, Needleman A (1980) Void nucleation effects in biaxially stretched sheets. J Eng Mater Technol 102: 249-256
6. Ferrasse S, Verrier P, Meesemaecker F (1998) Resistance spot weldability of high strength steels for use in car industry. Weld World 41: 177-195
7. Gologanu M, Leblond JB, Perrin G, Devaux J (1997) Recent extensions of Gurson's model for porous ductile metals. In: Continuum micromechanics. Springer-Verlag, Berlin, pp 61-106
8. Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth. I. Yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99: 2-15
9. Hasanbaşoǧlu A, Kaçar R (2006) Microstructure and property relationships in resistance spot weld between 7114 interstitial free steel and 304 austenitic stainless steel. J Mater Sci Technol 22: 375-381
10. Hoon H, Seok-Bong K, Jung-Han S, Ji-Ho L (2008) Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body. Mech Sci 50: 918-931
11. Hutchinson J (1973) Finite strain analysis of elastic-plastic solids and structures, vol 6. Harvard University, AMD, pp 17-29
12. Kahraman N (2007) The influence of welding parameters on the joint strength of resistance spot welded titanium sheets. Society of Automotive Engineering, Inc., 810352, vol 28, Warrendale, PA, pp 420-427
13. Lassance D, Fabrègue D, Delannay F, Pardoen T (2007) Micromechanics of room and high temperature fracture in 6xxx Al alloys. Prog Mater Sci 52: 62-129
14. Long X, Khanna SK (2007) Fatigue properties and failure characterization of spot welded high strength steel sheet. Int J Fatigue 29: 879-886
15. Marashi P, Pouranvari M, Amirabdollahian S, Abedi A, Goodarzi M (2008) Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels. Mater Sci Eng A 480: 175-180
16. Markiewicz E, Ducrocq P, Drazetic P, Haugou G, Fourmentraux T, Berard JY (2001) Material behaviour law identification for the various zones of the spot-weld under quasi-static loadings. Int J Mater Product Technol 16: 484-509
17. Marya M, Gayden XQ (2005) Development of requirements for resistance spot welding dual-phase (DP600) steels. Part 1: The causes of interfacial fracture. Weld J 84(11): 172-182
18. Marya M, Wang K, Hector LG, Gayden X (2006) Tensile-shear forces and fracture modes in single and multiple weld specimens in dual-phase steels. J Manufac Sci Eng 128: 287-298
19. Nahshon K, Hutchinson JW (2008) Modification of the Gurson model for shear failure. Eur J Mech 27: 1-17
20. Needleman A, Tvergaard V (1999) A micromechanical analysis of ductile-brittle transition at a weld. Eng Frac Mech 62: 317-338
21. Nielsen KL (2008) Ductile damage development in Friction Stir Welded Aluminum (AA2024) joints. Eng Frac Mech 75: 2795-2811
22. Nielsen KL, Tvergaard V (2008) Effect of a shear modified Gurson Model on damage development in a FSW tensile specimen. Int J Solids Struct. doi: 10.1016/j.ijSOLSTR.2008.09.011
23. Okazawa S, Usami T, Noguchi H, Fujii F (2002) Three-dimensional necking bifurcation in tensile steel specimens. J Eng Mech 128(4): 479-486
24. Pardoen T, Hutchinson JW (2000) An extended model for void growth and coalescence. J Mech Phys Solids 48: 2467-2512
25. Pedersen KR, Harthøj A (2008) Analysis and modelling of microstructure and hardness in resistance welded steel (in Danish). Bachelor project at IPL - DTU, Supervised by Prof. N. Bay., Prof. M.A.J. Somers, Ph.D. W. Zhang and M.Sc. K.L. Fris., No. MM08.02
26. Peirce D, Shih CF, Needleman A (1984) A tangent modulus method for rate dependent solids. Comput Struct 118: 875-887
27. Pouranvari M, Asgari HR, Mosavizadch M, Marashi PH, Goodarzi M (2007) Effect of weld nugget size on overload failure mode of resistance spot welds. Sci Technol Weld Join 12: 217-225
28. Ranjbar IN, Serajzadeh S, Kokabi AH (2008) Simulation of welding residual stresses in resistance spot welding, FE modeling and X-ray verification. J Mater Proces Technol 205: 60-69
29. Sarwar M, Priestner R (1996) Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel. J Mater Sci 31: 2091-2095
30. Sawhill JM Jr, Furr ST (1981) Spot weldability tests for high-strength steels. Society of Automotive Engineering, Inc., 810352, Warrendale, PA
31. Smith RA (1980) Sizing of spot welds by elastic/plastic analysis. In: Proceedings of the 3rd Colloquium of fracture, ECF 3, pp 49-56
32. Song Q, Zhang W, Bay N (2005) An experimental study determines the electrical contact resistance in resistance welding. Weld J 84: 73-76
33. Sun X, Stephens EV, Khaleel MA (2008) Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high strength steel spot welds under lap shear loading conditions. Eng Fail Anal 15: 356-367
34. Tong W, Tao H, Jaing X, Zhang N, Marya MP, Hector LG Jr, Gayden XQ (2005) Deformation and fracture of miniature tensile bars with resistance-spot-weld microstructures. Metal Mater Trans A 36: 2651-2669
35. Tvergaard V (1982a) Influence of void nucleation on ductile shear fracture at a free surface. J Mech Phys Solids 30: 399-425
36. Tvergaard V (1982b) On localization in ductile materials containing spherical voids. Int J Fract 18: 237-252
37. Tvergaard V (1990) Material failure by void growth to coalescence. Adv Appl Mech 27: 83-151
38. Tvergaard V (1993) Necking in tensile bars with rectangular cross-section. Comput Methods Appl Mech Eng 103: 273-290
39. Tvergaard V, Needleman A (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Fract 17: 389-407
40. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Mater 32: 157-169
41. Tvergaard V, Needleman A (2004) 3D analyses of the effect of weld orientation in Charpy specimens. Eng Fract Mech 71: 2179-2195
42. Uijl ND, Smith S (2006) Resistance spot welding of advanced high strength steels for the automotive industry. In: Proceedings of the 4th international seminar on advances in resistance welding, pp 30-60
43. Vanden Bossche DJ (1977) Ultimate strength and failure mode of spot welds in high strength steels. Society of Automotive Engineering, Inc., 770214, Warrendale, PA, pp 1-12
44. Wung P, Walsh T, Ourchane A, Stewart W, Jie M (2001) Failure of spot welds under in-plane static loading. Exp Mech 41: 100-106
45. Zhang W, Jensen HH, Bay N (1997) Finite element modeling of spot welding similar and dissimilar metals. In: Seventh international conference on computer technology in welding, pp 364-373