Shear-induced change of phase morphology and tensile property in injection-molded bars of high-density polyethylene/polyoxymethylene blends

European Polymer Journal

Volumn 45, Issue 3, 2009, Pages 747-756

  Su, Run ^a   Su, Juanxia ^a   Wang, Ke ^a   Yang, Changyue ^a   Zhang, Qin ^a   Fu, Qiang ^a  

^a SICHUAN UNIVERSITY   (China)

Author keywords

Co continuous morphology; Polyethylene; Polyoxymethylene; Shear; Tensile properties

Indexed keywords

ACETAL RESINS; DENSITY (SPECIFIC GRAVITY); DIFFERENTIAL SCANNING CALORIMETRY; INJECTION MOLDING; MECHANICAL PROPERTIES; MOLDING; MOLDS; MORPHOLOGY; PLASTIC MOLDS; POLYETHYLENES; POLYMER BLENDS; SCANNING; SCANNING ELECTRON MICROSCOPY; TENSILE PROPERTIES; THERMOPLASTICS;

CO-CONTINUOUS MORPHOLOGY; CO-CONTINUOUS STRUCTURES; COMPOSITION RANGES; CONTINUOUS PHASE; DEGREE OF ORIENTATIONS; DYNAMIC PACKING INJECTION MOLDINGS; HIGH DENSITIES; HIGH-DENSITY POLYETHYLENES; IMMISCIBLE POLYMER BLENDS; IN PROCESS; MELT MIXING; MORPHOLOGY CONTROLS; MORPHOLOGY-CONTROLLED; PHASE INVERSIONS; PHASE MORPHOLOGIES; POLYETHYLENE; POLYOXYMETHYLENE; SCANNING CALORIMETRIES; SCANNING ELECTRONS; SHEAR; X -RAY SCATTERINGS;

PROCESS CONTROL;

EID: 59649086836     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2008.12.009     Document Type: Article

References (46)

1. Lüftl S., Archodoulaki V.M., and Seidler S. Polym Degrad Stabil 91 (2006) 464-471
2. Duan Y., Li H., Ye L., and Liu X. J Appl Polym Sci 99 (2006) 3085-3092
3. Unal H., Sen U., and Mimaroglu A. Mater Design 26 (2005) 705-710
4. Unal H., Sen U., and Mimaroglu A. Tribol Int 37 (2004) 727-732
5. Chen J., Cao Y., and Li H. J Appl Polym Sci 101 (2006) 48-53
6. Dziadur W. Mater Charact 46 (2001) 131-137
7. Gao X., Qu C., and Fu Q. Polym Int 53 (2004) 1666-1671
8. Gao X., Qu C., Zhang Q., Peng Y., and Fu Q. Macromol Mater Eng 289 (2004) 41-48
9. Tashiro K., Kamae T., Asanaga H., and Oikawa T. Macromolecules 37 (2004) 826-830
10. Mihajlov M., and Nedkov E. J Polym Sci C: Polym Symp 38 (1972) 23-32
11. Hama H., and Tashiro K. Polymer 44 (2003) 6973-6988
12. Chen J., Cao Y., and Li H. Wear 260 (2006) 1342-1348
13. Mamunya Y., Muzychenko Y., Lebedev E., Boiteux G., Seytre G., Boullanger C., et al. Polym Eng Sci 47 (2007) 34-42
14. Mamunya Y., Muzychenko Y., Pissis P., and Shut M. Polym Eng Sci 42 (2002) 90-99
15. Takamatsu S., Kobayashi T., Komoto T., Sugiura M., and Ohara K. Polymer 35 (1994) 3598-3603
16. Tashiro K., Wu G., and Kobayashi M. Polymer 29 (1988) 1768-1778
17. Kikuchi A., Coulter J., and Angstadt D. J Injection Molding Technol 6 (2002) 91-106
18. Kalay G., and Bevis M. J Polym Sci B: Polym Phys 35 (1997) 415-430
19. Waschitschek K., Kech A., and Christiansen J. Composites A: Appl S 33 (2002) 735-744
20. Kikuchi A., Coulter J., and Gomatam R. J Appl Polym Sci 99 (2006) 2603-2613
21. Kalay G., and Kalay C. J Polym Sci B: Polym Phys 40 (2002) 1828-1834
22. Kalay G., and Bevis M. J Polym Sci B: Polym Phys 35 (1997) 241-265
23. Wang Y., Zou H., Fu Q., Zhang G., Shen K., and Thomann R. Macromol Rapid Commun 23 (2002) 749-752
24. Na B., Wang K., Zhang Q., Du R., and Fu Q. Polymer 46 (2005) 3190-3198
25. Wang Y., Fu Q., Li Q., Zhang G., Shen K., and Wang Y. J Polym Sci B: Polym Phys 40 (2002) 2086-2097
26. Wang Y., Zhang Q., Na B., Du R., Fu Q., and Shen K. Polymer 44 (2003) 4261-4271
27. Na B., Zhang Q., Wang Y., Du R., and Fu Q. Polymer 44 (2003) 5737-5747
28. Wang K., Zhao P., Yang H., Liang S., Zhang Q., Du R., et al. Polymer 47 (2006) 7103-7110
29. Wang Y., Zhang Q., and Fu Q. Macromol Rapid Commun 24 (2003) 231-235
30. Liang S., Yang H., Wang K., Zhang Q., Du R., and Fu Q. Acta Mater 56 (2008) 50-59
31. Ning N., Luo F., Pan B., Zhang Q., Wang K., and Fu Q. Macromolecules 40 (2007) 8533-8536
32. Wang K., Liang S., Du R., Zhang Q., and Fu Q. Polymer 45 (2004) 7953-7960
33. Wang Y., Na B., and Fu Q. Chin J Polym Sci 21 5 (2003) 505-514
34. Kobayashi K., Takahashi T., and Kobunshi K. Chem High Polym 28 (1971) 178-185
35. Balsamo V., and Gouveia L. E-Polymers 17 (2004) 1-19
36. Gabellini G., de Moraes M., and Bretas R. J Appl Polym Sci 60 (1996) 21-27
37. Zhang N., Bao X., Tan Z., Sun S., Zhou C., Yang H., et al. J Appl Polym Sci 105 (2007) 1237-1243
38. Pötschke P., and Paul D. Macrom Symp 198 (2003) 69-82
39. Willemse R., Speijer A., and Langeraar A. Polymer 40 (1999) 6645-6650
40. Machiels A., Denys K., Van D., and Posthuma B. Polym Eng Sci 36 (1996) 2451-2466
41. Grevecoeur G. PhD thesis. Leuven, Belgium: Katholieke Uneversiteit; 1991.
42. Nielsen L. Mechanical properties of polymers and composites, II (1974), Marcel Dekker, New York
43. Halpin J., and Kardos J. Polym Eng Sci 16 (1976) 344-352
44. Lees J. Polym Eng Sci 8 (1968) 186-194
45. Davies W. J Phys D Appl Phys 4 (1971) 1325-1339
46. Coran A., and Patel R. J Appl Polym Sci 20 (1976) 3005-3016