Effects of abrasive type cooling mode and peripheral grinding wheel speed on the AISI D2 steel ground surface integrity

International Journal of Machine Tools and Manufacture

Volumn 49, Issue 3-4, 2009, Pages 261-272

  Ben Fathallah, Brahim ^a   Ben Fredj, Nabil ^a   Sidhom, Habib ^a   Braham, Chedly ^b   Ichida, Yoshio ^c  

^a UNIVERSITY OF TUNIS   (Tunisia)

^b CNRS   (France)

^c UTSUNOMIYA UNIVERSITY   (Japan)

Author keywords

cBN; Cryogenic cooling; Grinding; High speed grinding; Residual stress; Sol gel alumina

Indexed keywords

ABERRATIONS; ABRASIVES; COLLOIDS; COOLING; CRYOGENICS; FLUIDS; GELATION; GELS; GRINDING (COMMINUTION); GRINDING MACHINES; GRINDING MILLS; GRINDING WHEELS; LIQUEFIED GASES; LIQUID NITROGEN; NITROGEN; OPTICAL PROPERTIES; OXIDES; QUALITY ASSURANCE; REMOVAL; RESIDUAL STRESSES; SOL-GEL PROCESS; SOL-GELS; SOLS; SPEED; STEEL; STRENGTH OF MATERIALS; SUPERCONDUCTING MATERIALS; TENSILE STRENGTH; WHEELS;

CBN; CRYOGENIC COOLING; GRINDING; HIGH-SPEED GRINDING; RESIDUAL STRESS; SOL-GEL ALUMINA;

GRINDING (MACHINING);

EID: 59449089625     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2008.10.005     Document Type: Article

References (35)

1. Malkin S. Grinding Technology: Theory and Application of Machining with Abrasives (1990), Ellis Horwood, Chichester, UK
2. Ha M.-K., Kwaka J.-S., Hwang Y.-M., and Chung J.-S. Machining characteristics of mold material in high-speed grinding. Journal of Materials Processing Technology 155 (2004) 1189-1195
3. Kopac J., and Krajnik P. High-performance grinding-a review. Journal of Materials Processing Technology 175 (2006) 278-284
4. Kwak J.-S. Application of Taguchi and response surface methodologies for geometric error in surface grinding process. International Journal of Machine Tools & Manufacture 45 (2005) 327-334
5. Holesovsky F., and Hrala M. Integrity of ground cylindrical surface. Journal of Materials Processing Technology 154 (2004) 714-721
6. Xiao G., and Malkin S. On-line optimization for internal plunge grinding. Annals of the CIRP 45/1 (1996) 287-292
7. Li G.F., Wang L.S., and Yang L.B. Multi-parameter optimization and control of the cylindrical grinding process. Journal of Materials Processing Technology 129 (2002) 232-236
8. Lucca D.A., Brinksmeier E., and Goch G. Progress in assessing surface and subsurface integrity. Annals of the CIRP 47 2 (1998) 669-693
9. Jackson M.J., and Mills B. Materials selection applied to vitrified alumina & cBN grinding wheels. Journal of Materials Processing Technology 108 (2000) 114-124
10. Chakraborty K., Chattopadhyay A.B., and Chakrabarti A.K. A study on the grindability of niobium microalloyed forging quality HSLA steels. Journal of Materials Processing Technology 141 (2003) 404-410
11. Klocke F., Brinksmeier E., Evans C., Howes T., Inasaki I., Minke E., Toenshoff H.K., Webster J.A., and Stuff D. High-speed grinding-fundamentals and state of the art in Europe, Japan and the USA. Annals of the CIRP 46 2 (1997) 715-724
12. Ichida Y., Sato R., Morimoto Y., Ohsawa Y., and Ben Fredj N. Formation mechanism of finished surface in ultrahigh-speed grinding with cBN Wheels. JSME International Journal, Series C 49 (2006) 100-105
13. Yui A., and Lee H.S. Surface grinding with ultra high speed cBN wheel. Journal of Materials Processing Technology 62 (1996) 393-396
14. Stephenson D.J., Jin T., and Corbett J. High efficiency deep grinding of a low alloy steel with plated cBN wheels. Annals of the CIRP 51 (2002) 241-244
15. Ben Fredj N., Braham C., and Sidhom H. Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling. Surface & Coatings Technology 200 (2006) 4846-4860
16. Ben Fredj N., and Sidhom H. Effects of the cryogenic cooling on the fatigue strength of the AISI 304 stainless steel ground components. Cryogenics 46 (2006) 439-448
17. Paul S., and Chattopadhyay A.B. A study of effects of cryo-cooling in grinding. International Journal of Machine Tools & Manufacture 35 (1995) 109-117
18. Fukaura K., Yokoyama Y., Yokoi D., Tsujii N., and ONO K. Fatigue of cold-work tool steels: effect of heat treatment and carbide morphology on fatigue crack formation, life, and fracture surface observations. Metallurgical and Materials Transactions A 35A (2004) 1289-1299
19. Nguyen T., and Zhang L.C. An assessment of the applicability of cold air and oil mist in surface grinding. Journal of Materials Processing Technology 140 (2003) 224-230
20. da Silva L.R., Bianchi E.C., and Fusse R.Y. Analysis of surface integrity for minimum quantity lubricant-MQL in grinding. International Journal of Machine Tools & Manufacture 47 (2007) 412-418
21. Jackson M.J., Davis C.J., Hitchiner M.P., and Mills B. High-speed grinding with cBN grinding wheels-applications and future technology. Journal of Materials Processing Technology 110 (2001) 78-88
22. Sunarto, and Ichida Y. Creep feed profile grinding of Ni-based superalloys with ultrafine-polycrystalline cBN abrasive grits. Precision Engineering 25 (2001) 274-283
23. Balart M.J., Bouzina A., Edwards L., and Fitzpatrick M.E. The onset of tensile residual stresses in grinding of hardened steels. Materials Science and Engineering 367A (2004) 132-142
24. Barbacki A., Kawalec M., and Hamrol A. Turning and grinding as a source of microstructural changes in the surface layer of hardened steel. Journal of Materials Processing Technology 133 (2003) 21-25
25. Eda H., Ohmura E., and Yamauchi S. Computer virtual simulation on structural changes of steel in grinding process and experimental verification. Annals of the CIRP 42/1 (1993) 389-392
26. Tawakoli T. High Efficiency Deep Grinding (1993), VDI-Verlag and Mechanical Engineering Publications Ltd. (MEP), London
27. Ghosh A., and Chattopadhyay A.K. Experimental investigation on performance of touch-dressed single-layer brazed cBN wheels. International Journal of Machine Tools & Manufacture 47 (2007) 1206-1213
28. Eranki J., Xiao G., and Malkin S. Evaluating the performance of (seeded gel) grinding wheels. Journal of Materials Processing Technology 32 (1992) 609-625
29. Rowe W.B., Ebbrell S., and Morgan M.N. Process requirements for cost-effective precision grinding. Annals of the CIRP 53 1 (2004) 255-258
30. Paul S., and Chattopadhyay A.B. The effect of cryogenic cooling on grinding forces. International Journal of Machine Tools & Manufacture 36 (1996) 63-72
31. Malkin S., and Guo C. Thermal analysis of grinding. Annals of the CIRP 56/2 (2007) 760-782
32. Wright J.D., and Sommertdijk N.A.J.M. Sol-Gel Materials Chemistry and Applications (2001), Taylor & Francis Books Ltd., London p. 103
33. Gu R.J., Shillor M., Barber G.C., and Jen T. Thermal analysis of the grinding process. Mathematical and Computer Modeling 39 (2004) 991-1003
34. Rowe W.B., Morgan M.N., and Allanson D.A. An advance in the modelling of thermal effects in the grinding process. Annals of the CIRP 40 1 (1991) 339-342
35. Choi T.J., Subrahmany N., Li H., and Shin Y.C. Generalized practical models of cylindrical plunge grinding processes. International Journal of Machine Tools & Manufacture 48 (2008) 61-71