Cutting forces in wood machining - Basics and applications in industrial processes. A review. COST Action E35 2004-2008: Wood machining - Micromechanics and fracture

Holzforschung

Volumn 63, Issue 2, 2009, Pages 157-167

  Marchal, Rémy ^a   Mothe, Frédéric ^b   Denaud, Louis Etienne ^c   Thibaut, Bernard ^d   Bleron, Laurent ^a  

^a ENSAM   (France)

^b LERFoB   (France)

^c UNIVERSITÉ PAUL SABATIER   (France)

^d CNRS   (France)

Author keywords

Cutting forces; Online control; Peeling process; Physico mechanical model; Sound; Vibrations; Wood industry; Wood machining

Indexed keywords

APPLICATIONS; ARCHITECTURAL ACOUSTICS; CONTROL SYSTEMS; INDUSTRIAL APPLICATIONS; INDUSTRY; MACHINING; MACHINING CENTERS; ONLINE SYSTEMS; TECHNOLOGY TRANSFER; VIBRATIONS (MECHANICAL); WOOD; WOOD PRODUCTS; WOODWORKING;

CUTTING FORCES; ONLINE CONTROL; PEELING PROCESS; PHYSICO-MECHANICAL MODEL; SOUND; VIBRATIONS; WOOD INDUSTRY; WOOD MACHINING;

PROCESS CONTROL;

ACOUSTICS; CONTROL SYSTEMS; CUTTING; FORCE; FRACTURE; MACHINING; MECHANICS; PEELING; PROCESS CONTROL; SURFACE PROPERTIES; VIBRATION; WOOD PRODUCTS; WOOD WORKING;

EID: 59449083264     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2009.014     Document Type: Review

References (77)

1. Ali, F. (2001) Modélisation et simulation thermomécanique de la coupe des métaux. ENSAM PhD thesis, Paris, 284 pp.
2. Axelsson, B.O.M. (1994) Lateral cutting force during machining of wood due to momentary disturbances in the wood structure and degree of wear of the cutting tool. Holz Roh Werkst. 52:198-204.
3. Axelsson, B.O.M., Grundberg, S.A., Grönlund, J.A. (1993) Tool wear when planning and milling. Measurement methodology and influencing factors. In: Proceeding of the 11th IWMS, Honne, May 25-27, 1993. pp. 159-176.
4. Beauchêne, J. (1996) Evolution du comportement mécanique du bois vert avec la température. Application à l'étude du déroulage et du tranchage de quelques bois guyanais. ENGREF PhD thesis, Montpellier. 164 pp.+ann.
5. Beauchêne, J., Thibaut, B. (1996) Influence de la température sur le comportement mécanique du bois vert: application à l'étuvage d'essences guyanaises en vue du déroulage. Proceedings of the "Quatrième Colloque Sciences et Industries du Bois", Nancy, 11-13 septembre 1996. pp. 299-306.
6. Bonin, V. (2006) Modélisation analytique de la déformation du copeau Durant le procédé de déroulage de hêtre. Thèse de Mécanique, ENSAM, 273 pp.
7. Boucher, J., Méausoone, P.-J., Perrin, L. (2004) Effect of diamond tool edge direction angle on cutting forces and tool wear during milling of medium density fiberboard and particleboard. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, July 5-7, 2004. pp. 399-407.
8. Butaud, J.C., Decès-Petit, C., Marchal, R. (1995) An experimental device for the study of wood cutting mechanisms: the microlathe. In: Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, October 2-4, 1995. pp. 479-485.
9. Cordebois, J.P. (1994) Viscoplastic modelling of cutting in turning. J. Mater. Process. Technol. 41:187-200.
10. Costes, J.-P. (2007) Measurements without contact of vibration during milling: two examples of applications in machining operations monitoring. Lecture in Training School of COST Action E35, Cluny, 5-7 December, 2007.
11. Costes, J.-P., Larricq, P. (2002) Towards high cutting speed in wood milling. Ann. Forest Sci. 59:857-865.
12. Cyra, G., Tanaka, C. (1997) The effects of grain orientation on routing surface, finish, cutting forces and acoustic emission. In: Proceeding of the 13th IWMS, Vancouver, June 17-20, 1997. pp. 323-331.
13. Darmawan, W., Usuki, H., Quesada, J., Marchal, R. (2008) Clearance wear and normal force of TiN-coated P30 in cutting hardboards and wood-chip cement boards. Holz Roh Werkst. 66:89-97.
14. Decès-Petit, C. (1996) Etude des phases transitoires au cours du déroulage de bois. ENSAM PhD thesis, Cluny. 120 pp.+ann.
15. Denaud, L.-E. (2006) Analyses vibratoires et acoustiques du déroulage. ENSAM PhD thesis, Cluny. 236 pp., 2 annexes.
16. Denaud, L.E., Bléron, L., Ratle, A., Marchal, R. (2005) Vibroacoustic analysis of wood peeling process: temporal and spectral analysis. In: Proceedings of the 17th IWMS, Rosenheim, Germany, September 26-28, 2005. pp. 55-65.
17. Denaud, L.E., Bléron, L., Ratle, A., Marchal, R. (2007a) Online control of wood peeling process: acoustical and vibratory measurements of lathe checks frequency. Ann. Forest Sci. 64:569-575.
18. Denaud, L.E., Bléron, L., Ratle, A., Marchal, R. (2007b) On-line measurement of the average lathe checks frequency of peeled veneers. In: Proceedings of the 3rd International Symposium on Wood Machining, Lausanne, May 21-23, 2007. pp. 77-80.
19. Dippon, J., Ren, H., Ben Amara, F., Altintas, Y. (1999) Orthogonal cutting mechanics of medium density fiberboards. In: Proceeding of the 14th IWMS, Epinal and Cluny, September 12-19, 1999. pp. 31-40.
20. Eyma, F., Méausoone, P.-J., Martin, P. (2004) Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B. Ann. Forest Sci. 61:55-64.
21. Fischer, R. (1999) Wood cutting simulation - A program to experiment without a machine. In: Proceeding of the 14th IWMS, Epinal and Cluny, September 12-19, 1999. pp. 553-562.
22. Fischer, R. (2004) Microprocesses at cutting edge - Some basics of machining wood. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, July 5-7, 2004. pp. 191-202.
23. Franz, N.C. An Analysis of the Wood-Cutting Process. University of Michigan Press, Ann Arbor, MI, 1958.
24. Goli, G., Marchal, R., Uzielli, L., Negri, M. (2003) Measuring cutting forces in routing wood at various grain angles. Study and comparison between up- and down-milling techniques, processing Douglas-fir and oak. In: Proceedings of 16th IWMS, Matsue, August 24-30, 2003. pp. 127-137.
25. Gonçalves, R., Néri, A.C. (2005) Orthogonal cutting forces in juvenile and mature Pinus taeda wood. Sci. Agric. (Piracicaba, Braz.), 62:310-318.
26. Heisel, U., Tröger, J., Martynenko, S. (2004) Aspects on high-performance cutting with machining centres. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, July 5-7, 2004. pp. 161-173.
27. Heisel, U., Martynenko, S., Schneider, M. (2007) Influence of chip space filling on cutting forces in high-speed milling of wood and derived timber products. In: Proceedings of the 3rd International Symposium on Wood Machining, Lausanne, May 21-23, 2007. pp. 51-54.
28. Hernández, R.E., Rojas, G. (2002) Effects of knife jointing and wear on the planed surface quality of sugar maple wood. Wood Fiber Sci. 34:293-305.
29. Huang, Y.-S. (1994) Cutting force components in orthogonal cutting parallel to the grain (90-0). II. Effect of feed lengths. Mokuzai Gakkaishi 40:1059-1066.
30. Iskra, P., Tanaka, C. (2005) The influence of wood fiber direction, feed rate, and cutting width on sound intensity during routing. Holz Roh Werkst. 63:167-172.
31. Iskra, P., Tanaka, C. (2006) A comparison of selected acoustic signal analysis techniques to evaluate wood surface roughness produced during routing. Wood Sci. Technol. 63:247-259.
32. Januten, E. (2002) A summary of methods applied to tool condition monitoring in drilling. Int. J. Machine Tools Manufact. 42:997-1010.
33. Kivimaa, E. (1950) The cutting force in woodworking. Publication number 18. The State Institute for Technical Research, Helsinski. 103 pp.
34. Ko, P., McKenzie, W., Cvitkovic, R., Robertson, M.F. (1999) Parametric studies in orthogonal machining MDF. In: Proceeding of the 14th IWMS, Epinal and Cluny, September 12-19, 1999. pp. 1-12.
35. Komatsu, M. (1976) Machine boring properties of wood. II. The effects boring conditions on the cutting forces and the accuracy of finishing. J. Jap. Wood Res. Soc. 22:491-497.
36. Komatsu, M. (1993) Machining performance of a router bit in the peripheral milling of wood. I. Effects of the radial rake angle of the peripheral cutting-edge on the cutting force and machined-surface roughness. Mokuzai Gakkaishi 39:628-635.
37. Korwaluk, G., Dziurka, D., Beer, P., Sinn, G., Stanzl-Tschegg, S. (2004) Influence of ammonia on particleboard properties. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, Austria, 5-7 July 2004. pp. 459-465.
38. Laraba-Abbes, F. (1998) Etude des comportements hyperélastiques et viscoélastiques de deux élastomères de type NR et PDMS par extensométrie optique bidimensionnelle. Thèse mécanique et matériaux. Ecole Centrale de Paris, Paris. 295 pp.
39. Lemaster, R.L., Kato, K. (1991) Generation of acoustic emission during chip formation. In: Proceedings of the 10th IWMS, October 21-23, Richmond, CA, pp. 146-151.
40. Lemaster, R.L., Stewart, J.S. (2005) Research in process monitoring of surface quality conducted at the North Carolina State University Wood Machining and Tooling Research Program. In: Proceedings of the 17th IWMS, Rosenheim, Germany, September 26-28, 2005. pp. 450-467.
41. Lemaster, R.L., Klamacki, B.E., Dornfeld, D.A. (1982) Analysis of acoustic emission in slow speed wood cutting. Wood Sci. 15:150-160.
42. Lemaster, R.L., Lu, L., Jackson, S. (2000a) The use of process monitoring techniques on a CNC wood router - Part 1. Sensor selection. Forest Prod. J. 50:31-38.
43. Lemaster, R.L., Lu, L., Jackson, S. (2000b) The use of process monitoring techniques on a CNC wood router - Part 2. Use of a vibration accelerometer to monitor tool wear and work piece quality. Forest Prod. J. 50:59-64.
44. Liska, J.A. (1950) Effect of rapid loading on the compression and flexural strength of wood. Forest Prod. Lab. Rep. No. 1767.
45. Lundberg, A.S., Axelsson, B.O.M. (1993) Studies of the cutting forces and the chip formation process when cutting frozen wood. In: Proceeding of the 11th IWMS, Honne, 25-27 May, 1993. pp. 57-72.
46. McKenzie, W. (1960) Fundamental aspects of wood cutting process. Forest Prod. J. X(9):447-456.
47. McKenzie, W. (1962) The relationship between the cutting properties of wood and its physical and mechanical properties. Forest Prod. J. XII(6):287-294.
48. McKenzie, W., Karpovich, H. (1975) Wear and blunting of the tool corner in cutting a wood-based material. Wood Sci. Technol. 9:59-73.
49. McKenzie, W.M., Ko, P., Cvitkovic, R., Ringler, M. (2001) Towards a model predicting cutting forces and surface quality in routing layered boards. Wood Sci. Technol. 35:563-569.
50. Marchal, R. (1989) Valorisation par tranchage et déroulage des bois de chênes méditerranéens. INPL PhD thesis, Nancy. 294 pp.
51. Marchal, R., Jullien, D., Mothe, F., Thibaut, B. (1993) Mechanical aspects of heating wood in rotary veneer cutting. In: Proceeding of the 11th IWMS, Honne, 25-27 May, 1993. pp. 257-278.
52. Marchal, R., Dai, C., Wang, B. (2000) La surveillance du déroulage par analyse acoustique et vibratoire: Résultats préliminaires, 6ème Séminaire PPF "Maîtrise globale du procédé d'enlèvement de matière et des techniques associées", ENSAM Metz. 12 pp.
53. Marchal, R., Negri, M. (1997) Rotary cutting of high density wood: lathe-settings programmed variation to improve the transient phases crossing. In: Proceedings of the 13th IWMS, Vancouver, June 17-20, 1997. pp. 547-559.
54. Merchant, M.E. (1945) Mechanics of the metal cutting process (I) - orthogonal cutting and a type II chip. J. Appl. Phys. 16:267-275.
55. Mothe, F. (1988) Aptitude au déroulage du bois de Douglas. Conséquences de l'hétérogénéité du bois sur la qualité des placages. INPL PhD thesis, Nancy. 173 pp.
56. Mothe, F., Marchal, R. (2001) Influence of the nosebar settings on tool instabilities in the peeling process. In: Proceedings of the 15th International Wood Machining Seminar, Los Angeles, CA, July 30-August 1, 2001. pp. 309-329.
57. Mothe, F., Thibaut, B., Marchal, R., Negri, M. (1997) Rotary cutting simulation of heterogeneous wood: application to Douglas fir peeling. In: Proceedings of the 13th International Wood Machining Seminar, Vancouver, June 17-20, 1997. pp. 411-428.
58. Movassaghi, E. (1985) Influence des paramètres microdensitométriques du bois sur les efforts de coupe et la qualité des placages de Douglas et de Châtaignier obtenus par déroulage. Thèse Docteur Ingénieur, INPL Nancy.
59. Murase, Y., Harada, S. (1995) Acoustic emission characteristics in wood cutting. I: effect of the grain angles on the amplitude of the acoustic emission. Mokuzai Gakkaishi 41:373-379.
60. Murase, Y., Nogami, H., Ohuchi, T. (2004) Acoustic emission characteristics in veneer with a roller bar. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, Austria, 5-7 July. pp. 185-189.
61. Nagatomi, K., Yoshida, K., Banshoya, K., Murase, Y. (1993) Recognition of wood cutting conditions trough cutting sounds. I: effect of tool system's stiffness and tool wear on the generation of sound in cutting parallel to the grain. Mokuzai Gakkaishi 39:521-528.
62. Nagatomi, K., Yoshida, K., Banshoya, K., Murase, Y. (1999) Relation between veneer quality and peeling sound in the peeling of sugi. In: Proceedings of the 14th IWMS, Epinal and Cluny, France, September, 12-19, 1999. pp. 681-690.
63. Oxley, P.L.B. Mechanics of Machining. An Analytical Approach to Assessing Machinability. Ellis Horwood Limited Publishers, Chichester, 1989, 242 pp.
64. Palmqvist, J. (2003) Parallel and normal cutting forces in peripheral milling of wood. Holz Roh Werkst. 61:409-415.
65. Palmqvist, J., Johansson, G. (1999) Cutting forces in peripheral milling of wood. In: Proceedings of the 14th IWMS, September 12-19, 1999. pp. 751-760.
66. Scholtz, F., Troeger, J. (2005) Modelling of cutting forces. In: Proceeding of the 17th IWMS, Rosenheim, September 26-28, 2005. pp. 260-271.
67. Sinn, G., Mayer, H., Zettl, B., Ede, C., Beer, P. (2004) Application of ultrasonic-assisted cutting in wood machining. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, Austria, July 5-7, 2004. pp. 499-503.
68. Sinn, G., Beer, P., Gindl, M., Parsh, R., Kisselbach, A., Standler, F., Stanz-Tschegg, S. (2005) Analysis of cutting forces in circumferential flat milling of MDF and particleboard. In: Proceeding of the 17th IWMS, Rosenheim, September 26-28, 2005. pp. 80-87.
69. Stewart, H.A. (1977) Optimal rake angle related to selected strength properties of wood. Forest Prod. J. 27:51-53.
70. Stewart, H.A. (1991) A comparison of tool materials, coatings, and treatments related to tool wear during wood machining. Forest Prod. J. 41:61-64.
71. Tanaka, C., Cyra, G., Nakao, T., Yoshinobu, M., Katayama, H. (1997) On-line control of feed-speed in routing. Mokuzai Gakkaishi 43:544-550.
72. Thibaut, B. (1988) Le processus de coupe du bois par déroulage. Habilitation Thesis, Universitédes Sciences et Techniques du Languedoc, Montpellier. 354 pp.
73. Thibaut, B. (1995) Basic process in veneer cutting. Summary of main experimental results and proposed simplistics models. Conférence invitée, Séminaire du National Industrial Research Institute of Nagoya, Japan, 26 juin 1995. 19 pp. + vidéo.
74. Thibaut, B., Beauchêne, J. (2004) Links between wood machining phenomena and wood mechanical properties: the case of 0°/90° orthogonal cutting of green wood. In: Proceedings of the 2nd International Symposium on Wood Machining, Vienna, Austria, July 5-7, 2004. pp. 149-160.
75. Timoshenko, S.P., Goodier, N. (1951) Theory of Elasticity. International Student Edition. McGraw-Hill, New York. 506 pp.
76. Vazquez-Cooz, I., Meyer, R.W. (2006) Cutting forces for tension and normal wood of maple. Forest Prod. J. 56:26-34.
77. Woodson, G.E., Koch, P. (1970) Tool forces and chip formation in orthogonal cutting of loblolly pine. U.S. Department of Agriculture, Forest Service Research Paper SO-52.