Characterization of material ductility of PP/EPR/talc blend under wide range of stress triaxiality at intermediate and high strain rates

Journal of Applied Polymer Science

Volumn 111, Issue 2, 2009, Pages 854-868

  Mae, Hiroyuki ^a  

^a HONDA R AND D CO LTD   (Japan)

Author keywords

Crazing; Ductile; Fracture; Mechanical properties; Poly(propylene) (PP)

Indexed keywords

CRAZING; DUCTILE FRACTURE; DUCTILITY; ETHYLENE; FAILURE ANALYSIS; MECHANICAL PROPERTIES; PROPYLENE; PUMPING PLANTS; SCANNING ELECTRON MICROSCOPY; SHEAR STRESS; SILICATE MINERALS; STRAIN RATE; STRESSES; TENSILE STRENGTH;

BIAXIAL LOADINGS; DUCTILE; FAILURE MECHANISMS; FINITE ELEMENT ANALYSIS (FEA); FRACTURE ANALYSIS; FRACTURE BEHAVIORS; FRACTURE LOCUS; FRACTURE MODES; FRACTURE SURFACES; HIGH STRAIN RATE (HSR); IMPACT LOADINGS; LOADING CONDITIONS; LOW STRESS; PLASTIC STRAINING; POLY(PROPYLENE) (PP); WIDE-RANGE;

FRACTURE;

FRACTAL ANALYSIS; FRACTURE; LOADING (TESTING); POLYMER BLEND; POLYMER PROPERTY; POLYMERIZATION; POLYPROPYLENE; SHEAR PROPERTY; STRESS; SYNTHETIC RUBBER; TENSILE PROPERTY;

EID: 58449115779     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.29069     Document Type: Article

References (48)

1. Maerinrri, F.; Ricco, T. J Mater Sci 1994, 29, 442.
2. Premphet, K.; Horanont, P. J Appl Polym Sci 2000, 76, 1929.
3. Lehmann, B.; Friedrich, K.; Wu, C. L.; Zhang, M. Q.; Rong, M. Z. J Mater Sci Lett 2003, 22, 1027.
4. Yang, H.; Zhang, Q.; Guo, M.; Wang, C.; Du, R. N.; Fu, Q. Polymer 2006, 47, 2106.
5. Yang, H.; Zhang, X.; Qu, C.; Li, B.; Zhang, L.; Zhang, Q.; Fu, Q. Polymer 2007, 48, 860.
6. Mae, H.; Omiya, M.; Kishimoto, K. J Solid Mech Mater Eng 2008, 2, 254.
7. Pae, K. D. J Mater Sci 1977, 12, 1209.
8. Lu, M. L.; Chiou, K. C.; Chang, F. C. J Polym. Res 1996, 3, 73.
9. G'Sell, C.; Aly-Helal, N. A.; Jonas, J. J. J Mater Sci 1983, 18, 1731.
10. Mae, H.; Omiya, M.; Kishimoto, K. Mater Sci Eng A 2008, 477, 168.
11. Mae, H. Mater Sci Eng A 2008, 496, 455.
12. Mae, H.; Omiya, M.; Kishimoto, K. J Solid Mech Mater Eng 2008, 2, 616.
13. Mae, H.; Omiya, M.; Kishimoto, K. J Appl. Polym Sci 2008, 107, 3520.
14. Mae, H.; Omiya, M.; Kishimoto, K. Int J Modem Phys B 2008, 22, 1129.
15. Mae, H.; Omiya, M.; Kishimoto, K. J. Soc Mater Sci Japan 2008, 57, 951.
16. Mae, H.; Omiya, M.; Kishimoto, K. J. Appl Polym Sci 2008, now is early view status.
17. Mae, H.; Omiya, M.; Kishimoto, K. J Appl Polym Sci 2008, 110, 1145.
18. Bao, Y.; Bai, Y.; Wierzbicki, T.; Tech. Report No. 135, Impact Crashworthiness Lab, MIT: Cambridge, MA, 2005.
19. Wierzbicki, T.; Bao, Y.; Bai, Y.; Proc 2005 SEM Annu Conf Exposition Appl Mech, 1295.
20. Mae, H.; Teng, X.; Bai, Y.; Wierzbicki, T. Mater Sci Eng A 2007, 459, 156.
21. Mae, H.; Teng, X.; Bai, Y.; Wierzbicki, T. Int J Solids Struct 2008, 45, 1430.
22. Mae, H.; Teng, X.; Bai, Y.; Wierzbicki, T. J Jpn Soc Exp Mech 2008, 8, 45.
23. Mae, H.; Teng, X.; Bai, Y.; Wierzbicki, T. J. Soc Mater Sci Jpn 2008, 57, 913.
24. Mae, H.; Teng, X.; Bai, Y.; Wierzbicki, T. J Solid Mech Mater Eng 2008, 2, 924.
25. Teng, X.; Mae, H.; Bai, Y.; Wierzbicki, T. Eng Fracture Mech 2008, 75, 4610.
26. Nicolopoulos, D.; Winkelmuller, G. Lect Notes Comput Sci 1996, 1067, 66.
27. Tai, H. Proc J SME Annu Meeting 2002, 5, 205.
28. Tai, H. IEIC Tech Report 2005, 100, 13.
29. Nicolopoulous, D.; Dominguez, A. Lect Notes Comput Sci 2008, 1823, 454.
30. http://www.altair.com
31. Murakami, D.; Kobayashi, S.; Torigaki, T.; Shizawa, K. Trans Jpn Soc Mech Eng A 2002, 68, 674.
32. Murakami, D.; Kobayashi, S.; Torigaki, T.; Shizawa, K. Trans Jpn Soc Mech Eng A 2002, 68, 682.
33. Kobayashi, S.; Tomii, D.; Shizawa, K. Trans Jpn Soc Mech Eng A 2004, 70, 810.
34. Mae, H.; Kishimoto, K. J Solid Mech Mater Eng 2007, 1, 35.
35. Steenbrink, A. C.; van der Giessen, E.; Wu, P. D. J Mech Phys Solids 1997, 45, 405.
36. Pijnenburg, K. G. W.; Seelig, T.; van der Giessen, E. Eur J Mech. A/Solids 2005, 24, 740.
37. Zairi, F.; Nait-Abdelaziz, M.; Woznica, K.; Gloaguen, J. M. Eur J Mech A/Solids 2005, 24, 169.
38. Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Lefebvre, J. M. Int J Plast 2008, 24, 945.
39. RADIOSS User's Code Interface Manual; Altair Engineering lne, 2003.
40. Zhang, Z. L.; Hauge, M.; Odegard, J.; Thaulow, C. Int J Solids Struct 1999, 36, 2386.
41. Mae, H.; Kishimoto, K. Trans Soc Automot Eng Jpn 2007, 38, 63.
42. Bao, Y.; Wierzbicki, T. J Eng Mater Tech. 2004, 126, 314.
43. Wierzbicki, T.; Bao, Y.; Lee, Y.-W.; Bai, Y. Int J Mech Sci 2005, 47, 719.
44. Teng, X.; Wierzbicki, T. Eng Frac Mech 2006, 73, 1653.
45. Rice, J. R.; Tracey, D. M. J Mech Phys Solids 1969, 17, 201.
46. Hancock, J. W.; Mackenzie, A.C.J Mech. Phys Solids 1976, 24, 147.
47. Johnson, G. R.; Cook, W. H. Eng Fracture Mech 1985, 21, 31.
48. Barsoum, I.; Faleskog. J Int J Solids Struct 2007, 44, 1768.