Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2006, Pages 507-512

  Price, T S ^a   Shipway, P H ^a   McCartney, D G ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

CGDS; Fatigue; Residual stress; Ti6A14V; Titanium; Young's modulus

Indexed keywords

ALLOYS; CERIUM ALLOYS; COATINGS; DURABILITY; ELASTIC MODULI; ELASTICITY; GAS DYNAMICS; PESTICIDES; RESIDUAL STRESSES; STRENGTH OF MATERIALS; SUBSTRATES; SURFACE TREATMENT; THERMAL SPRAYING; TITANIUM;

ALLOY SUBSTRATES; BEFORE AND AFTER; BEND FATIGUES; CGDS; COATING INTERFACES; COLD GAS DYNAMIC SPRAYING; COLD SPRAY DEPOSITIONS; FATIGUE; FATIGUE BEHAVIORS; FATIGUE ENDURANCE LIMITS; FATIGUE LIVES; MEDICAL PROSTHESES; RESIDUAL STRESS STATES; SIGNIFICANT REDUCTIONS; SURFACE PREPARATION METHODS; TI6A14V; TI6A14V ALLOYS; TITANIUM COATINGS; YOUNG'S MODULUS;

TITANIUM ALLOYS;

EID: 58349100477     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1361/105996306X147108     Document Type: Conference Paper

References (24)

1. G. Rizzi, A. Scrivani, M. Fini, and R. Giardino, Biomedical Coatings to Improve the Tissue-Biomaterial Interface, Int. J. Artif. Organs, 2004, 27, p. 649-657
2. D.M. Brunette, Principles of Cell Behavior on Titanium Surfaces and Their Application to Implanted Devices, D.M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Ed., Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer-Verlag, 2001, p. 485-512
3. J. Breme, E. Eisenbarth, and V. Biehl, Titanium and Its Alloys for Medical Applications, Titanium and Titanium Alloys: Fundamentals and Applications, C. Leyens and M. Peters, Ed., Wiley-VCH, 2003, p. 423-452
4. J. Dumbleton and M.T. Manley, Current Concepts Review: Hydroxyapatite-Coated Prostheses in Total Hip and Knee Arthroplasty, J. Bone Joint Surg Am., 2004, 86A, p. 2526-2540
5. L. Carlsson, L. Regner, C. Johansson, M. Gottlander, and P. Herberts, Bone Response to Hydroxyapatite-Coated and Commercially Pure Titanium Implants in the Human Arthritic Knee, J Orthop. Res., 1994, 12, p. 274-285
6. A.J.M. Yee, H.K. Kreder, I. Bookman, and J.R. Davey, A Randomized Trial of Hydroxyapatite Coated Prostheses in Total Hip Arthroplasty, Clin. Orthop., 1999, 366, p. 120-132
7. M. Hamadouche, J. Witvoet, R. Porcher, A. Meunier, L. Sedel, and R. Nizard, Hydroxyapatite-Coated versus Grit-Blasted Femoral Stems: A Prospective, Randomised Study Using EBRA-FCA, J. Bone Joint Surg. Br., 2001, 83B, p. 979-987
8. A. Eckardt, H.M. Aberman, H.D. Cantwell, and J. Heine, Biological Fixation of Hydroxyapatite-Coated versus Grit-Blasted Titanium Hip Stems: A Canine Study, Arch. Orthop. Trauma Surg., 2003, 123, p. 28-35
9. N. Aebli, J. Krebs, H. Stich, P. Schawalder, M. Walton, D. Schwenke, H. Gruner, B. Gasser, and J.C. Theis, In Vivo Comparison of the Osseointegration of Vacuum Plasma Sprayed Titanium-and Hydroxyapatite-Coated Implants, J. Biomed. Mater. Res. Part A, 2003, 66A, p. 356-363
10. Y.H. Kim, J.S. Kim, S.H. Oh, and J.M. Kim, Comparison of Porous-Coated Titanium Femoral Stems with and without Hydroxyapatite Coating, J. Bone Joint Surg. Am., 2003, 85A, p. 1682-1688
11. S.A. Hacking, M. Tanzer, E.J. Harvey, J.J. Krygier, and J.D. Bobyn, Relative Contributions of Chemistry and Topography to the Osseointegration of Hydroxyapatite Coatings, Clin. Orthop., 2002, 405, p. 24-38
12. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7, p. 205-212
13. V. Shukla, G.S. Elliott, B.H. Kear, and L.E. McCandlish, Hyperkinetic Deposition of Nanopowders by Supersonic Rectangular Jet Impingement, Scr. Mater., 2001, 44, p. 2179-2182
14. M. Baleani, M. Viceconti, and A. Toni, The Effect of Sandblasting Treatment on Endurance Properties of Titanium Alloy Hip Prostheses, Artif. Organs, 2000, 24, p. 296-299
15. R.S. Bellows, S. Muju, and T. Nicholas, Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6A1-4V, Int. J. Fatigue, 1999, 21, p. 687-697
16. D.C. Maxwell and T. Nicholas, A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue, ASTM STP 1332, Fatigue and Fracture Mechanics, Vol. 29, T.L. Panontin and S.D. Sheppard, Ed., ASM International 1999, p. 626-641
17. S.R. Thompson, J.J. Ruschau, and T. Nicholas, Influence of Residual Stresses on High Cycle Fatigue Strength of Ti-6Al-4V Subjected to Foreign Object Damage, Int. J. Fatigue, 2001, 23, p. S405-S412
18. T. Nicholas, Step Loading for Very High Cycle Fatigue, Fatigue Fract. Eng Mater. Struct., 2002, 25, p. 861-869
19. E.P. Popov and T.A. Balan, Engineering Mechanics of Solids, 2nd ed., Prentice-Hall, Inc., 1999
20. T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., 1996, 5, p. 401-418
21. G.E. Dieter, Mechanical Metallurgy, 3rd ed., McGraw-Hill, 1986
22. R.S. Lima, A. Kucuk, C.C. Berndt, J. Karthikeyan, CM. Kay, and J. Lindemann, Deposition Efficiency, Mechanical Properties and Coating Roughness in Cold-Sprayed Titanium, J. Mater. Sci. Lett., 2002, 21, p. 1687-1689
23. S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 1991, 200, p. 49-66
24. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni, and A. Vaidya, Role of Thermal Spray Processing Method on the Microstructure, Residual Stress and Properties of Coatings: An Integrated Study for Ni-5 wt.% Al Bond Coats, Mater. Sci. Eng. A, 2004, 364, p. 216-231