Ablation rate and morphology of superficial and deep dentin irradiated with different Er:YAG laser energy levels

Photomedicine and Laser Surgery

Volumn 26, Issue 6, 2008, Pages 523-529

  Raucci Neto, Walter ^a   Chinelatti, Michelle Alexandra ^a   Palma Dibb, Regina Guenka ^a  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ABLATION RATES; COMPARISON TESTS; ENERGY LEVELS; ER:YAG LASERS; INITIAL MASSES; LASER IRRADIATIONS; LEAST SIGNIFICANT DIFFERENCES; MASS LOSSES; SCANNING ELECTRON MICROSCOPES; SEM IMAGES; TISSUE DAMAGES;

ABLATION; ERBIUM; IRRADIATION; LASER PULSES; LASERS; SCANNING ELECTRON MICROSCOPY;

ELECTRON ENERGY LEVELS;

DENTIN; HUMANS; LASERS, SOLID-STATE; MICROSCOPY, ELECTRON, SCANNING; MOLAR, THIRD;

EID: 58149114673     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2201     Document Type: Article

References (47)

1. Dostálová, T., Jelinková, H., Krejsa, O., Hamal, K., Kubelka, J., Kugerova, H., and Procházka, S. (1998). Noncontact Er:YAG laser ablation: clinical evaluation. J. Clin. Laser Med. Surg. 16, 273-282.
2. Hibst, R. (2002). Lasers for caries removal and cavity preparation: state of the art and future directions. J. Oral Laser Applic. 2, 203-211.
3. Takamori, K., Furukawa, H., Morikawa, Y., Katayama, T., and Watanabe, S. (2003). Basic study on vibrations during tooth preparations caused by high-speed drilling and Er:YAG laser irradiation. Lasers Surg. Med. 32, 25-31.
4. Attrill, D.C., Davies, R.M., King, T.A., Dickinson, M.R., and Blinkhorn, A.S. (2004). Thermal effects of the Er:YAG laser on a simulated dental pulp: a quantitative evaluation of the effects of a water spray. J. Dent. 32, 35-40.
5. Chinelatti, M.A., Ramos, R.P., Chimello, D.T., Borsatto, M.C., Pécora, J.D., and Palma-Dibb, R.G. (2004). Influence of the use of Er:YAG laser for cavity preparation and surface treatment in microleakage of resin-modified glass ionomer restorations. Oper. Dent. 29, 430-436.
6. Chinelatti, M.A., Ramos, R.P., Chimello, D.T., Corona, S.A., Pécora, J.D., and Palma-Dibb, R.G. (2006). Influence of Er:YAG laser on cavity preparation and surface treatment in microleakage of composite resin restorations. Photomed. Laser Surg. 24, 214-218.
7. Wigdor, H.A., Walsh, J.T., Featherstone, J.D., Visuri, S.R., Fried, D., and Waldvogel, J.L. (1995). Lasers in dentistry. Lasers Surg. Med. 16, 103-133.
8. Cozean, C., Arcoria, C.J., Pelagalli, J., and Powell, L. (1997). Dentistry for the 21st century? Erbium:YAG laser for teeth. J. Am. Dent. Assoc. 128, 1080-1087.
9. Bader, C., and Krejci, I. (2006). Marginal quality in enamel and dentin after preparation and finishing with an Er:YAG laser. J. Dent. 19, 337-342.
10. Hossain, M., Nakamura, Y., Tamaki, Y., Yamada, Y., Murakami, Y., and Matsumoto, K. (2003). Atomic analysis and knoop hardness measurements of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J. Oral Rehabil. 30, 515-521.
11. Aoki, A., Ishikawa, I., Yamada, T., et al. (1998). Comparison between Er:YAG laser and conventional technique for root caries treatment in vitro. J. Dent. Res. 77, 1404-1414.
12. Hibst, R., and Keller, U. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances: I. Measurement of the ablation rate. Lasers Surg. Med. 9, 338-344.
13. Matsumoto, K., Nakamura, Y., Mazeki, K., and Kimura, Y. (1996). Clinical dental application of Er:YAG laser for class V cavity preparation. J. Clin. Laser Med. Surg. 14, 123.
14. Matsumoto, K., Wang, X., Zhang, C., and Kinoshita, J.I. (2007). Effect of a novel Er:YAG laser in caries removal and cavity preparation: A clinical observation. Photomed. Laser Surg. 25, 8-13.
15. Hossain, M., Nakamura, Y., Kimura, Y., Nakamura, G., and Matsumoto, K. (1999). Ablation depths and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J. Clin. Laser Med. Surg. 17, 105-109.
16. Gimbel, C.B. (2000). Hard tissue laser procedures. Dent. Clin. North Am. 44, 931-953.
17. Kim, J.M., Kim, M.E., and Kim, K.S. (2005). Ablation rate and intrapulpal temperature by irradiation with Er:YAG laser. Korean J. Oral Med. 9, 375-381.
18. Jelinková, H., Dostalová, T., Krejsa, O., Hamal, K., Kubelka, J., and Procházka, S. (1997). The influence of Er:YAG laser ablation on cavity surface and cavity shape. SPIE Proc. 2672, 193-196.
19. Armengol, V., Jean, A., and Marion, D. (2000). Temperature rise during Er:YAG and Nd: YAG laser ablation of dentin. J. Endodont. 26, 138-141.
20. Mercer, C.E., Anderson, P., and Davis, G.R. (2003). Sequential 3D x-ray microphotographic measurement of enamel and dentine ablation by an Er:YAG laser. Br. Dent. J. 25, 99-104.
21. Lizarelli, R.F., Kurachi, C., Misoguti, L., and Bagnato, V.S. (1999). Characterization of enamel and dentin response to Nd:YAG picosecond laser ablation. J. Clin. Laser Med. Surg. 17, 127-131.
22. Raum, K., Kempf, K., Hein, H.J., Schubert, J., and Maurer, P. (2007). Preservation of microelastic properties of dentin and tooth enamel in vitro - a scanning acoustic microscopy study. Dent. Mater. 23, 1221-1228.
23. Kinney, J.H., Marshall, S.J., and Marshall, G.W. (2003). The mechanical properties of human dentin: a critical review and re-evaluation of the dental literature. Crit. Rev. Oral Biol Med. 14, 13-29.
24. Marshall, G.W. Jr. (1993). Dentin: microstructure and characterization. Quintessence Int. 24, 606-617.
25. Balooch, G., Marshall, G.W., Marshall, S.J., Warren, O.L., Asif, S.A., and Balooch, M. (2004). Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth. J. Biomech. 37, 1223-1232.
26. Habelitz, S., Rodriguez, B.J., Marshall, S.J., Marshall, G.W., Kalinin, S.V., and Gruverman, A. (2007). Peritubular dentin lacks piezoelectricity. J. Dent. Res. 86, 908-911.
27. Marshall, G.W., Marshall, S.J., Kinney, J.H., and Balooch, M. (1997). The dentin substrate: structure and properties related to bonding. J. Dent. Res. 25, 441-458.
28. Pashley, D. (1989). Dentin: a dynamic substrate - a review. Scanning Microsc. 3, 161-174.
29. Fuentes, V., Toledano, M., Osorio, R., and Carvalho, R.M. (2003). Microhardness of superficial and deep sound human dentin. J. Biomed. Mater. Res. A. 15, 850-853.
30. Toledano, M., Osorio, R., Osorio, E., Prati, C., and Carvalho, R.M. (2005). Microhardness of acid-treated and resin infiltrated human dentine. J. Dent. 33, 349-354.
31. Souza, A.E., Corona, S.A.M., Palma-Dibb, R.G., Borsatto, M.C., and Pécora, J.D. (2004). Influence of Er:YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths. J. Dent. 32, 269-275.
32. Gonçalves, M., Corona, S.A., Palma-Dibb, R.G., and Pécora, J.D. (2007). Influence of pulse repetition rate of Er:YAG laser and dentin depth on tensile bond strength of dentin-resin interface. J. Biomed. Mater. Res. A. [Nov 1, Epub ahead of print].
33. Kim, K.S., Kim, M.E., and Shin, E.J. (2005). Irradiation time and ablation rate of enamel in contact and non-contact irradiation with Er:YAG laser. Photomed. Laser Surg. 23, 216-218.
34. Mehl, A., Kremers, L., Salzmann, K., and Hickel, R. (1997). 3D volume-ablation rate and thermal side effects with the Er:YAG and Nd:YAG laser. Dent. Mater. 13, 246-251.
35. Lizarelli, R.F.Z., Moriyama, L.T., Jorge, J.R.P., and Bagnato, V.S. (2006). Comparative ablation rate from a Er:YAG laser on enamel and dentin of primary and permanent teeth. Laser Phys. 16, 849-858.
36. Corona, S.A.M., Souza, A.E., Chinelatti, M.A., Borsatto, M.C., Pecora, J.D., and Palma-Dibb, R.G. (2007). Effect of energy and pulse repetition rate of Er:YAG laser on dentin ablation ability and morphological analysis of the laser-irradiated substrate. Photomed. Laser Surg. 25, 26-33.
37. Corona, S.A., Souza, A.E., Chinelatti, M.A., Pecora, J.D., Borsatto, M.C., and Palma-Dibb, R.G. (2007). Influence of energy and pulse repetition rate of Er:YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface. J. Biomed. Mater. Res. A. 84A, 569-575.
38. Ceballos, L., Osorio, R., Toledano, M., Tay, F.R., and Marshall, G.W. (2002). Bonding to Er:YAG laser treated dentin. J. Dent. Res. 81, 119-122.
39. Chimello-Sousa, D.T., Souza, A.E., Chinelatti, M.A., Pecora, J.D., Palma-Dibb, R.G., and Milori Corona, S.A. (2006). Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel. J. Dent. 34, 245-251.
40. Monguini, E.M., Wanderley, R.L., Pecora, J.D., Palma-Dibb, R.G., Corona, S.A., and Borsatto, M.C. (2004). Bond strength to dentin of primary teeth irradiated with varying Er:YAG laser energies and SEM examination of the surface morphology. Lasers Surg. Med. 34, 254-259.
41. Ekworapoj, P., Sidhu, S.K., and McCabe, J.F. (2007). Effect of different power parameters of Er,Cr:YSGG laser on human dentine. Lasers Med. Sci. 22, 175-182.
42. Shigetani, Y., Okamoto, A., Abu-Bakr, N., and Iwaku, M. (2002). A study of cavity preparation by Er:YAG laser - observation of hard tooth structures by laser scanning microscope and examination of the time necessary to remove caries. Dent. Mater. J. 21, 20-31.
43. Lee, B.S., Lin, C.P., Hung, Y.L., and Lan, W.H. (2004). Structural changes of Er:YAG laser-irradiated human dentin. Photomed. Laser Surg. 22, 330-334.
44. Lizarelli, R.F., Moryiama, L.T., and Bagnato, V.S. (2003). Ablation of composite resins using Er:YAG laser - comparison with enamel and dentin. Lasers Surg. Med. 33, 132-139.
45. Kinney, J.H., Balooch, M., Marshall, S.J., Marshall, G.W. Jr., and Weihs, T.P. (1996). Hardness and Young's modulus of human peritubular and intertubular dentine. Arch. Oral Biol. 41, 9-13.
46. Senawongse, P., Otsuki, M., Tagami, J., and Mjör, I. (2006). Age-related changes in hardness and modulus of elasticity of dentine. Arch. Oral Biol. 51, 457-463.
47. Bachmann, L., Diebolder, R., Hibst, R., and Zezell, D.M. (2005). Changes in chemical composition and collagen structure of dentine tissue after erbium laser irradiation. Spectrochim. Acta A. Mol. Biomol. Spectrosc. 61, 2634-2639.