-
1
-
-
0012793417
-
Laminated Tooling for Moulding Polyurethane Parts
-
Dearborn, Michigan, April 22- 25
-
Dickens, P.M., Simon, D. and Sketch, R., "Laminated Tooling for Moulding Polyurethane Parts", Proc. from the Rapid Prototyping and Manufacture Conference, Dearborn, Michigan, April 22- 25, 1996.
-
(1996)
Proc. from the Rapid Prototyping and Manufacture Conference
-
-
Dickens, P.M.1
Simon, D.2
Sketch, R.3
-
2
-
-
0010967834
-
Processing and Application of Rapid Prototyped Laminate Production Tooling
-
18-19 December, Buckinghamshire College, UK, Edited by Graham Bennett, PubI. by Mechanical Engineering Publications Ltd, London, UK
-
Soar, R.C., Arthur, A. and Dickens, P.M., "Processing and Application of Rapid Prototyped Laminate Production Tooling", Proc. from the 2nd National Conf. on Rapid Prototyping and Tooling Research, 18-19 December, 1996, Buckinghamshire College, UK, Edited by Graham Bennett, PubI. by Mechanical Engineering Publications Ltd, London, UK.
-
(1996)
Proc. from the 2nd National Conf. on Rapid Prototyping and Tooling Research
-
-
Soar, R.C.1
Arthur, A.2
Dickens, P.M.3
-
3
-
-
0019699050
-
A Low Cost Blanking Tool with Bainite Steel Sheet Laminated
-
Nakagawa, T. and Suzuki, K., "A Low Cost Blanking Tool with Bainite Steel Sheet Laminated", Proc. from the 21st International Machine Tool Design & Research Conf., Swansea, Wales, December, 1981, Publ. by University College of Swansea, Department of Mech. Eng, Wales, in Association with Macmillan Press, Ltd, London, Engl., ISBN 0-33-330847-6, (Conf. Code 00053), pp129-13.
-
Proc. from the 21st International Machine Tool Design & Research Conf., Swansea, Wales, December, 1981, Publ. by University College of Swansea, Department of Mech. Eng, Wales, in Association with Macmillan Press, Ltd, London, Engl., ISBN 0-33-330847-6, (Conf. Code 00053)
, pp. 129-213
-
-
Nakagawa, T.1
Suzuki, K.2
-
4
-
-
58049175786
-
-
Nakagawa, T., Rapid Prototyping Technologies in Japan, Proc. de 4emes Assises Europeennes du Protorypage Rapide, 4-5 October 1995, Paris, France, Publ. by Remark S.A., 2, rue des Garennes, 78570 Andersy , France, pp 1-12.
-
Nakagawa, T., "Rapid Prototyping Technologies in Japan", Proc. de 4emes Assises Europeennes du Protorypage Rapide, 4-5 October 1995, Paris, France, Publ. by Remark S.A., 2, rue des Garennes, 78570 Andersy , France, pp 1-12.
-
-
-
-
5
-
-
0027206064
-
Laminate Tooling for Injection Moulding
-
July
-
Glozer, G.R and Brevick, J.R., "Laminate Tooling for Injection Moulding", Proc. from the Institute of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 207, July 1992, pp 9-15.
-
(1992)
Proc. from the Institute of Mechanical Engineers, Part B: Journal of Engineering Manufacture
, vol.207
, pp. 9-15
-
-
Glozer, G.R.1
Brevick, J.R.2
-
6
-
-
58049147284
-
-
Schreiber, M.P. and Clyens, S., Blanking Tools Manufactured by Laminated Laser Cut Steel Sheets, Proc. of the 2nd European Conference on Rapid Prototyping and Manufacture, Nottingham, 15-16 July 1993, Edited by P.M. Dickens, Publ. by The University of Nottingham, ISBN 0-95 19759-1-9, pp167-176.
-
Schreiber, M.P. and Clyens, S., "Blanking Tools Manufactured by Laminated Laser Cut Steel Sheets", Proc. of the 2nd European Conference on Rapid Prototyping and Manufacture, Nottingham, 15-16 July 1993, Edited by P.M. Dickens, Publ. by The University of Nottingham, ISBN 0-95 19759-1-9, pp167-176.
-
-
-
-
7
-
-
58049161215
-
-
Walczyk, D.F. and Hardt, D.E., A New Rapid Tooling Method for Sheet Metal Forming Dies, 5th Internationnal Conference on Rapid Prototyping, June 12-15, 1994, Edited by R.P. Chartfoff et al., Sponsored by the Rapid Prototype Development Laboratory, The Management Development Centre, The University of Dayton, pp275-289.
-
Walczyk, D.F. and Hardt, D.E., "A New Rapid Tooling Method for Sheet Metal Forming Dies", 5th Internationnal Conference on Rapid Prototyping, June 12-15, 1994, Edited by R.P. Chartfoff et al., Sponsored by the Rapid Prototype Development Laboratory, The Management Development Centre, The University of Dayton, pp275-289.
-
-
-
-
8
-
-
58049142408
-
-
Lyett, D., Barlier, C., Weinstoerffer, M. and Delebecque, B., Une Nouvelle Station de Prototypage Rapide par Stratoconception® et Microfraisage Rapide de Materiaux Legers, Proc. de 4emes Assises Europeennes du Prototypage Rapide, 4-5 October 1995, Paris, France, Publ. by Remark S.A., 2, rue des Garennes, 78570 Andersy, France, pp 1-11.
-
Lyett, D., Barlier, C., Weinstoerffer, M. and Delebecque, B., "Une Nouvelle Station de Prototypage Rapide par Stratoconception® et Microfraisage Rapide de Materiaux Legers", Proc. de 4emes Assises Europeennes du Prototypage Rapide, 4-5 October 1995, Paris, France, Publ. by Remark S.A., 2, rue des Garennes, 78570 Andersy, France, pp 1-11.
-
-
-
-
9
-
-
58049159399
-
-
Soar, R.C. and Dickens, P.M., Finishing Laminated Tooling with Stereolithography EDM Electrodes, Proc. from the 5th European Conference on Rapid Prorotyping and Manufacture, 4-6 June, 1996, Helsinki, Finland, Publ. by the University of Nottingham, Edited by Dr. P.M. Dickens, ISBN 0-95 19759-5-1, pp 87-106.
-
Soar, R.C. and Dickens, P.M., "Finishing Laminated Tooling with Stereolithography EDM Electrodes", Proc. from the 5th European Conference on Rapid Prorotyping and Manufacture, 4-6 June, 1996, Helsinki, Finland, Publ. by the University of Nottingham, Edited by Dr. P.M. Dickens, ISBN 0-95 19759-5-1, pp 87-106.
-
-
-
-
10
-
-
0022270128
-
Laser Cut Sheet Forming Dies
-
April
-
Nakagawa, T., Kuneida, M. and Liu, S.D., "Laser Cut Sheet Forming Dies", Proc. from the 25th International MTDR Conference, April 1985, pp 505-510.
-
(1985)
Proc. from the 25th International MTDR Conference
, pp. 505-510
-
-
Nakagawa, T.1
Kuneida, M.2
Liu, S.D.3
-
11
-
-
0029770212
-
-
Arthur, A., and Dickens, P.M., and Cobb, R.C., Using Rapid Prototyping to Produce Electro Discharge Machining Electrode, Rapid Prototyping Journal, 2, No.1, February 1996, pp 4-12, ISSN 1355-254.
-
Arthur, A., and Dickens, P.M., and Cobb, R.C., "Using Rapid Prototyping to Produce Electro Discharge Machining Electrode", Rapid Prototyping Journal, Vol 2, No.1, February 1996, pp 4-12, ISSN 1355-254.
-
-
-
|