Carrier signal selection for sensorless control of PM synchronous machines at zero and very low speeds

Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)

Volumn , Issue , 2008, Pages

  Raca, Dejan ^a   García, Pablo ^b   Reigosa, David ^b   Briz, Fernando ^b   Lorenz, Robert D ^c  

^a Magnetek Inc   (United States)

^b UNIVERSITY OF OVIEDO   (Spain)

^c UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CIVIL AVIATION; ELECTRIC NETWORK ANALYSIS; SIGNAL PROCESSING;

CARRIER SIGNALS; ESTIMATION ERRORS; INITIAL POSITIONS; LOW SPEEDS; PM SYNCHRONOUS MACHINES; ROTATING VECTORS; SENSOR LESS; SENSORLESS CONTROLS; THEORETICAL ANALYSES; TRANSIENT RESPONSES;

PERMANENT MAGNETS;

EID: 57949107889     PISSN: 01972618     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/08IAS.2008.225     Document Type: Conference Paper

References (25)

1. J. Holtz and J. Juliet, "Sensorless acquisition of the rotor position angle of induction motors with arbitrary stator windings," IEEE Trans. on Ind. Appl., Vol. 41, No. 6, pp. 1675-1682, Nov.-Dec. 2005.
2. E. Robeischl and M. Schroedl, "Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion," IEEE Trans. on Ind. Appl., Vol. 40, No. 2, pp. 591-598, Mar.-Apr. 2004.
3. M. Wolbank, J.L. Machl, and H. Hauser, "Closed-loop compensating sensor versus new current derivative sensors for shaft-sensorless control of inverter fed induction machines," IEEE Trans. on Instrum. Meas., Vol. 53, pp. 1311-1315, Aug. 2004.
4. S. Ogasawara and H. Akagi, "Implementation and position control performance of a position-sensorless IPM motor drive system based on magnetic saliency," IEEE Trans. on Ind. Appl., vol. 34, pp. 806-812, July-Aug. 1998.
5. S. Ovrebo, "Control of Permanent Magnet Synchronous Machines", Ph.D. dissertation, Dept. of Electrical Power Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, 2004.
6. A. Consoli, G. Scarcella, and A. Testa, "Industry application of zero-speed sensorless control techniques for PM synchronous motors," IEEE Trans. on Ind. Appl., vol. 37, pp. 513 - 521, March-April 2001.
7. P.L. Jansen and R.D. Lorenz, "Transducerless position and velocity estimation in induction and salient AC machines," IEEE Trans. on Ind. Appl., Vol. 31, No. 2, pp. 240-247, Mar./Apr. 1995.
8. S. Shinnaka, "New 'mirror-phase vector control' for sensorless drive of permanent-magnet synchronous motor with pole saliency," IEEE Trans. on Ind. Appl., vol. 40, pp. 599-606, March-April 2004.
9. M.J. Corley, "Position and Velocity estimation of permanent magnet synchronous motors using terminal measurements", MS Thesis, Deparment of Electrical and Computer Engineering, University of Wisconsin-Madison 1993.
10. M. Linke, R. Kennel, and J. Holtz, "Sensorless position control of permanent magnet synchronous machines without limitation at zero speed," Proc. of 28th IEEE IECON, 2002, vol. 1, pp. 674-679.
11. M.C. Harke, D. Raca, and R.D. Lorenz, "Implementation Issues for Fast Initial Position and Magnet Polarity Identification of PM Synchronous Machines with Near Zero Saliency," Proc. of EPE 2005 Conference, Dresden, Germany, 2005.
12. J. Holtz, "Initial rotor polarity detection and sensorless control of PM synchronous machines," Proc. of IEEE-IAS Annual Meeting, Vol. 4, pp. 2040-2047, Oct 2006.
13. J.-I. Ha, K. Ide, T. Sawa, and S.-K. Sul, "Sensorless rotor position estimation of an interior permanent-magnet motor from initial states," IEEE Trans. on Ind. Appl., vol. 39, pp. 761-767, May-June 2003.
14. P.B. Schmidt, M.L. Gasperi, G.R. Ajitli, and H. Wijenayake, "Initial rotor angle detection of a nonsalient pole permanent magnet synchronous machine," Proc. of IEEE IAS 32nd Annual Meeting, 1997, vol. 1, pp. 459-463.
15. D. Raca, M.C. Harke, and R.D. Lorenz, "Robust magnet polarity estimation for initialization of pm synchronous machines with near zero saliency," Proc. of IEEE-IAS An.l Meet., Vol. 1, pp. 481-487, Oct 2006.
16. H. Kim, K.-K. Huh, R.D. Lorenz, and T.M. Jahns, "A novel method for initial rotor position estimation for IPM synchronous machine drives," IEEE Trans. on Ind. Appl., vol. 40, pp. 1369-1378, Sep.-Oct. 2004.
17. H. Kim and R.D. Lorenz, "Carrier signal injection based sensorless control methods for IPM synchronous machine drives," Proc. of IEEE-IAS Annual Meeting, Vol. 2, pp.977 - 984, Oct. 2004.
18. Dejan Raca, Pablo García, David Reigosa, Fernando Briz, and Robert Lorenz, "A Comparative Analysis of Pulsating vs. Rotating Vector Carrier Signal Injection-Based Sensorless Control," Proc. of APEC 2008, pp.879 - 885, Feb. 2008.
19. J.M. Guerrero, M. Leetmaa, F. Briz, A. Zamarron, and R.D. Lorenz; "Inverter nonlinearity effects in high-frequency signal-injection-based sensorless control methods," IEEE Trans. on Ind. Appl., Vol. 41, No. 2, pp. 618 - 626, Mar.-Apr. 2005.
20. C.-H. Choi and J.-K. Seouk, "Compensation of Zero-Current Clamping Effects for Sensorless Drives Based on High-Frequency Signal Injection," IEEE Trans. on Ind. Appl., Vol. 43, No. 5, pp. 1258 - 1265, Sep.-Oct. 2007.
21. J.-H Jan, S.K. Sul, and Y.C. Son "Current Measurement Issues in Sensorless Control Algorithm using High Frequency Signal Injection Methods", Proc. of IEEE-IAS Ann. Meet., Vol. 2, pp. 1134-1141, Oct 2003.
22. Chan-Hee Choi and Jul-Ki Seok, "Pulsating Signal Injection-Based Sensorless Control of PMSM Using Injection Axis Switching Scheme Without Additional Offline Commissioning Test offline commissioning test.", Proc. of IEEE-IAS Ann, Meet., pp 2365 - 2370, 23-27 Sept..
23. D. Reigosa, P. Garcia, F. Briz, D. Raca, R.D. Lorenz, "Modeling and Adaptive Decoupling of Transient Resistance and Temperature Effects in Carrier-based Sensorless Control of PM Synchronous Machines", Proc. of IEEE-IAS Annual Meeting, Oct. 2008.
24. J. Holtz, "Pulsewidth modulation for electronic power conversion", IEEE Proc., Vol. 82, No. 8, pp. 1194 - 1214, Aug. 1994.
25. R.D. Lorenz and K. Van Patten, "High-Resolution Velocity Estimation for All Digital, ac Servo Drives," IEEE Trans. on Ind. Appl., Vol. 27, No. 4, pp. 701 - 705, July-Aug. 1991.