Improved model of kinetics of strain induced precipitation and microstructure evolution of Nb microalloyed steels during multipass rolling

ISIJ International

Volumn 48, Issue 10, 2008, Pages 1457-1466

  Pereda, B ^a   Rodriguez Ibabe, J M ^a   Lopez B ^a  

^a TECNUN UNIVERSITY OF NAVARRA   (Spain)

Author keywords

Microstructural modeling; Nb microalloyed steel; Strain induced precipitation

Indexed keywords

CHEMICAL ANALYSIS; HOT ROLLING; HOT ROLLING MILLS; HOT WORKING; METAL ANALYSIS; METAL WORKING; MICROSTRUCTURE; NIOBIUM; NIOBIUM ALLOYS; STEEL; STEEL METALLOGRAPHY; STEEL PIPE;

AUSTENITE MICROSTRUCTURES; CHEMICAL COMPOSITIONS; COMPLEX INTERACTIONS; EMPIRICAL MODELS; GENERAL EQUATIONS; IMPROVE-A; IMPROVED MODELS; LABORATORY TESTS; MICROSTRUCTURAL MODELING; MICROSTRUCTURAL MODELS; MICROSTRUCTURAL SOFTENING; MICROSTRUCTURE EVOLUTIONS; MULTIPASS; MULTIPASS ROLLINGS; NB MICROALLOYED STEEL; NB PRECIPITATIONS; NEW MODELS; PROCESS PARAMETERS; STRAIN INDUCED PRECIPITATION;

NIOBIUM COMPOUNDS;

EID: 57749186080     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.48.1457     Document Type: Article

References (48)

1. M. G. Akben, I. Weiss and J. J. Jonas: Acta Metall.., 29 (1981), 111.
2. W. P. Sun, W. J. Liu and J. J. Jonas: Metall. Trans. A, 20A (1989), 2707.
3. O. Kwon and A. J. DeArdo: Acta Metall. Mater., 39 (1991), 529.
4. C. Klinkenberg, K. Hulka and W. Bleck: Steel Res. Int., 75 (2005), 11.
5. J. C. Herman, B. Donnay and V Leroy: ISIJ Int., 32 (1992), 779.
6. B. Dutta and C. M. Sellars: Mater. Sci. Technol., 3 (1987), 197.
7. A. LeBon, J. Rofes-Vernis and C. Rossard: Met. Sci., 9 (1975), 36.
8. S. S. Hansen, J. B. Vander Sande and M. Cohen: Metall. Trans. A, 11A (1980), 387.
9. B. Dutta, E. J. Palmiere and C. M. Sellars: Acta Mater., 49 (2001), 785.
10. H. S. Zurob, Y. Brechet and G. Purdy: Acta Mater., 49 (2001), 4183.
11. C.I. Iparraguirre, A. I. Fernández, J. M. Rodriguez-Ibabe and B. López: Mater. Sci. Forum, 539 (2007), 411.
12. R. Abad, A. I. Fernández, B. López and J. M. Rodriguez-Ibabe: ISIJ Int., 41 (2001), 1373.
13. A. Fernandez, B. López and J. M. Rodriguez-Ibabe: Thermomechanical Processing: Mechanics, Microstructure and Control, ed. by E. J. Palmiere et al., The University of Sheffield, UK, (2003), 302.
14. A. I. Fernández, P. Uranga, B. López and J. M. Rodriguez-Ibabe: ISIJ Int., 40 (2000), 893.
15. M. Arribas, B. López and J. M. Rodriguez-Ibabe: Mater. Sci. Eng. A, A485 (2008), 383.
16. S. F. Medina and A. Quispe: ISIJ Int., 41 (2001), 774.
17. C. Iparraguirre: Ph.D. thesis, University of Navarra, (2007).
18. E. Scheil: Arch. Eisenhüttenwes., 12 (1935), 565.
19. P. D. Hodgson and R. K. Gibbs: ISIJ Int., 36 (1996), 1329.
20. P. Choquet, A. LeBon and Ch. Perdrix: Proc, ICSMA 7, Int. Conf. on the Strength of Metals and Alloys, Vol. 2, ed. by H. J. McQueen et al, Pergamon Press, Oxford, (1985), 1025.
21. Ch. Perdrix: Characteristic of Plastic Deformation of Metals during Hot Working, ECSC Report, No. 7210 EA/31, IRSID, (1987).
22. J. H. Beynon, A. R. S. Ponter and C. M. Sellars: Proc. Int. Conf. Modelling of Metall Forming Processes, ed. by J. L. Chenot and E. Oñate, Kluwer Academic Publishers, Dordrecht, (1988), 321.
23. A. I. Fernández, B. López and J. M. Rodriguez-Ibabe: Scr. Mater., 46 (2002), 823.
24. K. J. Irvine, F. B. Pickering and T. Gladman: J. Iron Steel Inst, 205 (1967), 161.
25. P. D. Hodgson: Mater. Forum, 17 (1993), 403.
26. J. M. Silveira, E. Silva and R. Barbosa: Scr. Mater., 29 (1993), 881.
27. S. F. Medina and C. A. Hernandez: Acta Mater., 44 (1996), 137.
28. C. Roucoules, S. Yue and J. J. Jonas: Metall. Mater. Trans. A, 26A (1995), 181.
29. E. J. Palmiere, C. I. Garcia and A. J. DeArdo: Metall. Mater. Trans. A, 25A (1994), 277.
30. A. J. DeArdo: Int. Mater. Rev., 48 (2003), 371.
31. CEIT Internal Report.
32. A. Pandit, A. Murugaiyan, A. Saha Podder, A. Haldar, D. Bhattacharjee, S. Chandra and R. K. Ray: Scr. Mater., 53 (2005), 1309.
33. K. B. Kang, O. Kwon, W B. Lee and C. G. Park: Scr. Mater., 36 (1997), 1303.
34. S. F. Medina and A. Quispe: Mater. Sci. Forum, 426-432 (2003), 1139.
35. S. F. Medina, A. Quispe and M. Gomez: Mater. Sci. Technol., 17 (2001), 536.
36. S. F. Medina and A. Quispe: ISU Int., 39 (1999), 913.
37. M. Gomez, S. F. Medina, A. Quispe and P. Valles: ISIJ Int., 42 (2002), 423.
38. S. F. Medina and A. Quispe: Mater. Sci. Technol., 16 (2000), 635.
39. S. Yamamoto, C. Ouchi and T. Osuka: Proc. Thermomechanical Processing of Microalloyed Austenite, ed. by P. J. Wray, A. J. DeArdo and G. A. Ratz, AIME, Warrendale, PA, (1982), 613.
40. C. Ouchi, T. Sampei, T. Okita and I. Kozasu: Hot Deformation of Austenite, ed. by J. B. Balance, AIME, New York, (1977), 316.
41. C. Iparraguirre, A. I. Fernández, B. López, C. Scott, A. Rose, W. Kranendonk, B. Soenen and G. Paul: Mater. Sci. Forum, 500-501 (2005), 677.
42. C. Iparraguirre, A. I. Fernández and B. López: Mater. Sci. Forum, 550 (2007), 429.
43. L. N. Pussegoda, P. D. Hodgson and J. J. Jonas: Mater. Sci. Technol., 8 (1992), 63.
44. E. V. Pereloma, B. R. Crawford and P. D. Hodgson: Mater. Sci. Eng. A, A299 (2001), 27.
45. X. G. Zhou, Z. Y. Liu, D. Wu, Z. Li and C. M. Li: Acta Metall. Sin. (Engl. Lett.), 19 (2006), 385.
46. D. Q. Bai, S. Yue, W. P. Sun and J. J. Jonas: Metall. Trans. A, 24A (1993), 2151.
47. W. J. Liu and M. G. Akben: Can. Metall. Q., 26 (1987), 145.
48. A. Fernandez, B. López and J. M. Rodriguez-Ibabe: Ser. Mater., 40 (1999), 543.