Investigation of mixture preparation effects on gasoline HCCI combustion aided by measurements of wall heat flux

Journal of Engineering for Gas Turbines and Power

Volumn 130, Issue 6, 2008, Pages

  Chang, Junseok ^a   Filipi, Zoran S ^b   Kuo, Tang Wei ^a   Assanis, Dennis N ^b   Najt, Paul M ^a   Rask, Rodney B ^a  

^a GENERAL MOTORS CORPORATION   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

HCCI; Mixture preparation; Surface heat flux

Indexed keywords

COMBUSTION; COMBUSTION CHAMBERS; DIESEL ENGINES; ENGINE CYLINDERS; FLIGHT DYNAMICS; FUEL ECONOMY; GASOLINE; IGNITION SYSTEMS; MIXTURES; SAFETY VALVES; SMOKE; THERMOCHEMISTRY; TIME MEASUREMENT;

CHARGE MOTIONS; CHARGE STORAGES; COMBUSTION CHAMBER WALLS; COMBUSTION DIAGNOSTICS; DIRECT INJECTIONS; ECONOMY BENEFITS; EMISSION ANALYSIS; EXHAUST REINDUCTION; EXPERIMENTAL INVESTIGATIONS; EXTERNAL MIXING; FUEL FILMS; FUEL IMPINGEMENTS; HCCI; HCCI COMBUSTIONS; HCCI ENGINES; HCCI OPERATIONS; HEAT FLUX MEASUREMENTS; INJECTION TIMINGS; INTAKE PORTS; MIXTURE PREPARATION; SURFACE HEAT FLUX; SWIRL CONTROL VALVES; VEHICLE APPLICATIONS; WALL HEAT FLUXES;

HEAT FLUX;

EID: 57749184184     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.2943194     Document Type: Article

References (20)

1. Grenda, J., 2004, "Numerical Modeling of Charge Stratification for the Combustion Control of HCCI Engines," unpublished; Aroonsrisopon, T., Werner, P., Waldman, J., Sohm, V., Forester, D., Morikawa, T., and Iida, M., "Expanding the HCCI Operation With the Charge Stratification," SAE Paper No. 2004-01-1756.
2. Sjoberg, M., and Dec, J. E., 2005, "Effects of Engine Speed, Fueling Rate, and Combustion Phasing on the Thermal Stratification Required to Limit HCCI Knocking Intensity," SAE Paper No. 2005-01-2125.
3. Sjoberg, M., Edling, L., Eliassen, T., Magnusson, L., and Angstrom, H., 2002, "GD1 HCCI: Effects of Injection Timing and Air Swirl on Fuel Stratification, Combustion and Emissions Formation," SAE Paper No. 2002-01-0106.
4. Aleiferis, P. G., Charalambides, A. G., Hardalupas, Y., Taylor, A. M. K. P., and Urata, Y., 2005, "Modeling and Experiments of HCCI Engine Combustion Charge Stratification and Internal EGR," SAE Paper No. 2005-01-3725.
5. Reuss, D. L., and Sick, V., 2005, "Inhomogeneities in HCCI Combustion: An Imaging Study," SAE Paper No. 2005-01-2122.
6. Dec, J. E., and Sjoberg, M., 2004, "Isolating the Effects of Fuel Chemistry on Combustion Phasing in an HCCI Engine and the Potential of Fuel Stratification for Ignition Control," SAE Paper No. 2004-01-0557.
7. Najt, P. M., and Foster, D. E., 1983, "Compression-Ignited Homogeneous Charge Combustion," SAE Paper No. 830264.
8. Aceves, S. M., 2001, "A Sequential Fluid-Mechanic Chemical-Kinetic Model of Propane HCCI Combustion," SAE Paper No. 2001-01-1027.
9. Aceves, S., Flowers, D., Martinez-Frias, J., Espiosa-Loza, F., Christensen, M., Johansson, B., and Hessel, R., 2005, "Analysis of the Effect of Geometry Generated Turbulence on HCCI Combustion by Multi-Zone Modeling," SAE Paper No. 2005-01-2134.
10. Sun, Y., Shuai, S., Wang, J., and Wang, Y., 2003, "Numerical Simulation of Mixture Formation and Combustion of Gasoline Engines With Multi-Stage Direct Injection Compression Ignition (DICI)," SAE Paper No. 2003-01-1091.
11. Christensen, M., and Johansson, B., 2002, "The Effect of In-Cylinder Flow and Turbulence on HCCI Operation," SAE Paper No. 2002-01-2864.
12. Kong, S., Marriott, C. D., Rutland, C. J., and Reitz, R. D., 2002, "Experiments and CFD Modeling of Direct Injection Gasoline HCCI Engine Combustion," SAE Paper No. 2002-01-1925.
13. Chang, J., Guralp, O., Filipi, Z., Assanis, D., Kuo, T., Najt, P., and Rask, R., 2004, "New Heat Transfer Correlation for an HCCI Engine Derived From Measurements of Instantaneous Surface Heat Flux," SAE Paper No. 2004-01-2996.
14. Chang, J., 2004, "Thermal Characterization and Heat Transfer Study of a Gasoline Homogeneous Charge Compression Ignition Engine Via Measurements of Instantaneous Wall Temperature and Heat Flux in the Combustion Chamber," Ph.D. thesis, Department of Mechanical Engineering, University of Michigan.
15. Chang, J., Filipi, Z., Assanis, D., Kuo, T., Najt, P., and Rask, R., 2005, "Characterizing The Thermal Sensitivity of a Gasoline HCCI Engine With Measurements of Instantaneous Wall Temperature and Heat Flux," Int. J. Engine Res., 6, Special Issue Paper No. 289.
16. Chang, J., Filipi, Z., Assanis, D., Kuo, T., Najt, P., and Rask, R., 2007, "Investigation of Mixture Preparation Effects on Gasoline HCCI Combustion Aided by Measurements of Wall Heat Flux," Charleston, SC, ASME Paper No. ICEF2007-1698.
17. Witze, P. O., and Green, R. M., 2005, "Comparison of Single and Dual Spray Fuel Injectors During Cold Start of a PF I Spark Ignition Engine Using Visualization of Liquid Fuel Films and Pool Fires," SAE Paper No. 2005-01-3863.
18. Ohyama, Y., Nogi, T., and Ohsuga, M., 1992, "Effects of Fuel/Air Mixture Preparation on Fuel Consumption and Exhaust Emission in a Spark Ignition Engine," IMechE Paper No. C389/232, p. 59.
19. Drake, M. C., Fansler, T. D., Solomon, A. S., and Szekely, G. A., 2003, "Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions From a Wall-Controlled Spark-Ignited Direct - Injection Engine," SAE Paper No. 2003-01-0547.
20. Chang, J., Guralp, O., Filipi, Z., Assanis, D., Kuo, T., Najt, P., and Rask, R., 2006, "Method for Mid Load Operation of Auto-Ignition Combustion," U.S. Patent No. 7128,062.