Numerical analysis of interphase heat and mass transfer of cluster in a circulating fluidized bed

Powder Technology

Volumn 189, Issue 1, 2009, Pages 87-96

  Shuyan, Wang ^a   Lijie, Yin ^a   Huilin, Lu ^a   Long, Yu ^b   Bouillard, Jacques ^c   Zhenhua, Hao ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

^b Harbin Boiler Co Ltd   (China)

^c INSTITUT NATIONAL DE L ENVIRONNEMENT INDUSTRIEL ET DES RISQUES INERIS   (France)

Author keywords

Heat and mass transfer; Numerical simulation; Particle cluster; Riser

Indexed keywords

COMPUTER SIMULATION; FLUID DYNAMICS; FLUIDIZATION; FLUIDIZED BED PROCESS; FLUIDIZED BEDS; HEAT TRANSFER; MATHEMATICAL MODELS; NAPHTHALENE; NUMERICAL ANALYSIS; REYNOLDS NUMBER; THREE DIMENSIONAL;

CFD MODELS; CIRCULATING FLUIDIZED BEDS; GAS CONCENTRATIONS; HEAT AND MASS TRANSFER; HEAT AND MASS TRANSFER COEFFICIENTS; IN LINES; INDIVIDUAL PARTICLES; ISOLATED PARTICLES; LARGE CLUSTERS; NUMERICAL SIMULATION; PARTICLE CLUSTER; RISER; SMALL CLUSTERS;

MASS TRANSFER;

NAPHTHALENE;

ARTICLE; CHEMICAL PHENOMENA; COMPUTATIONAL FLUID DYNAMICS; FLUIDIZED BED REACTOR; GAS ANALYSIS; HEAT TRANSFER; MASS; MASS TRANSFER;

EID: 57649238596     PISSN: 00325910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.powtec.2008.06.011     Document Type: Article

References (41)

1. Guenther C., and Breault R. Wavelet analysis to characterize cluster dynamics in a circulating fluidized bed. Powder Technol. 173 (2007) 163-173
2. Nova S., Krol S., and de Lasa H. Particle velocity and particle clustering in down-flow reactors. Powder Technol. 148 (2004) 172-185
3. Moran J.C., and Glicksman L.R. Experimental and numerical studies on the gas flow surrounding a single cluster applied to a circulating fluidized bed. Chem. Eng. Sci. 58 (2003) 1879-1886
4. Harris A.T., Davidson J.F., and Thorpe R.B. The prediction of particle cluster properties in the near wall region of a vertical riser. Powder Technol. 127 (2002) 128-143
5. Zhao Y., Lu H., He Y., Ding J., and Yin L. Numerical prediction of combustion of carbon particle clusters in a circulating fluidized bed riser. Chem. Eng. J. 118 (2006) 1-10
6. Yin L., Wang S., Lu H., Ding J., Mostofi R., and Hao Z. Simulation of effect of catalyst particle cluster on dry methane reforming in circulating fluidized beds. Chem. Eng. J. 131 (2007) 123-134
7. Wang S., Yin L., Lu H., He Y., Ding J., Liu G., and Li X. Simulation of effect of catalytic particle clustering on methane steam reforming in a circulating fluidized bed reformer. Chem. Eng. J. 139 (2008) 136-146
8. Van de Velden M., Baeyens J., Seville J.P.K., and Fan X. The solids flow in the riser of a circulating fluidised bed (CFB) viewed by positron emission particle tracking (PEPT). Powder Technol. 183 (2008) 290-296
9. Farber L., and Depew C.A. Heat transfer effects to gas-solids mixtures using solid spherical particles of uniform size. Ind. Eng. Chem. Fundam. 2 (1963) 164-172
10. Jepson G., Poll A., and Smith W. Heat transfer from gas to wall in a gas-solids transport. Trans. Inst. Chem. Eng. 41 (1963) 207-211
11. Boothroyd H.H. Fully developed heat transfer to a gaseous suspension of particle flowing turbulently in ducts of different size. J. Mech. Eng. Sci. 12 (1970) 191-200
12. Depew C.A., and Cramer E.R. Heat transfer to horizontal gas-solids suspension flows. J. Heat Transfer, Trans. ASME 92 (1970) 77-82
13. Matsumoto S., Ohnishi S., and Maeda S. Heat transfer to vertical gas-solid suspension flow. J. Chem. Eng. Jpn. 11 (1978) 89-95
14. Serikbaev M.A., and Kerimov R.V. An experimental investigation of velocity profiles and calculation of heat transfer with gas-solids suspension flow in a tube. Therm. Eng. 34 (1987) 614-616
15. Feng Z., and Michaelides E.E. Mass and heat transfer from fluid spheres at low Reynolds numbers. Powder Technol. 112 (2000) 63-69
16. Basu P., and Halder P.K. Mass transfer from a coarse particle to a fast bed of fine solids. AIChE Symp. Ser. 84 (1988) 58-67
17. Kumar H.B., and Sublette K.L. Effect of high voidage on mass transfer coefficient in a fluidized bed. Chem. Eng. Commun. 121 (1993) 157-163
18. Hayhurst A.N., and Parmar M.S. Measurement of the mass transfer coefficient and Sherwood number for carbon spheres burning in a bubbling fluidized bed. Combust. Flame 130 (2002) 361-375
19. Breault R.W. A review of gas-solid dispersion and mass transfer coefficient correlations in circulating fluidized beds. Powder Technol. 163 (2006) 9-17
20. Werther J., and Vollert J. Mass transfer and reaction behavior of a circulating fluidized bed reactor. Chem. Eng. Technol. 17 (1994) 201-209
21. Subbarao D., and Gambhir S. Gas to particle mass transfer in risers. Proceedings of 7th International Circulating Fluidized Beds Conference (2002), Canadian Society for Chemical Engineering, Niagara Falls 97-104
22. Lloyd B., and Boehm R. Flow and heat transfer around a linear array of spheres. Numer. Heat Transf., Part A 26 (1994) 237-252
23. Calis H.P.A., Nijenhuis J., Paikert B.C., Dautzenberg F.M., and van den Bleek C.M. CFD modeling and experimental validation of pressure drop and flow profile in a novel structured catalytic reactor packing. Chem. Eng. Sci. 56 (2001) 1713-1720
24. Ramachandran R.S., Kleinstreuer C., and Wang T.Y. Forced convection heat transfer of interacting spheres. Numer. Heat Transf. 15 (1989) 471-487
25. Logtenberg S.A., Nijemeisland M., and Dixon A.G. Computational fluid dynamics simulations of fluid flow and heat transfer at the wall-particle contact points in a fixed-bed reactor. Chem. Eng. Sci. 54 (1999) 2433-2439
26. Romkes S.J.P., Dautzenberg F.M., van den Bleek C.M., and Calis H.P.A. CFD modelling and experimental validation of particle-to-fluid mass and heat transfer in a packed bed at very low channel to particle diameter ratio. Chem. Eng. J. 96 (2003) 3-13
27. Gidaspow D. Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions (1994), Academic Press, Boston
28. Fan L.S., and Zhu C. Principles of Gas-Solid Flows (1998), Cambridge university press, Cambridge
29. Sogin H.H. Sublimation disks to air streams flowing normal to their surfaces. Trans. ASME 80 (1958) 61-69
30. Reid R.C., Prausnitz J.M., and Poling B.E. The Properties of Gases and Liquids (1987), McGraw-Hill Book Company, New York
31. Patankar S.V. Numerical Heat Transfer and Fluid Flow (1981), McGraw-Hill Book Company, New York
32. Yurong H., Huilin L., Qiaoqun S., Lidan Y., Yunhua Z., Gidaspow D., and Bouillard J. Hydrodynamics of gas-solid flow around immersed tubes in bubbling fluidized beds. Powder Technol. 145 (2004) 88-105
33. Ranz W.E., and Marshall Jr. W.R. Evaporation from drops. Chem. Eng. Progress 48 (1952) 141-146
34. Whitaker S. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles. AIChE J. 18 (1972) 361-371
35. Fabrizio S. Mass transfer around freely moving active particles in the dense phase of a gas fluidized bed of inert particles. Chem. Eng. Sci. 62 (2007) 4159-4176
36. Bird R.B., Stewart W.E., and Lightfoot E.N. Transport Phenomena (1960), Wiley, New York
37. Frosling N. The evaporation of falling drops. Gerlands Beitr. Geophys. 52 (1938) 170-216 (in German)
38. Rowe P.N., Claxton K.T., and Lewis J.B. Heat and mass transfer from a single sphere in an extensive flowing fluid. Trans. Inst. Chem. Eng. 43 (1965) 14-31
39. Maheshwari A., Chhabra R.P., and Biswas G. Effect of blockage on drag and heat transfer from a single sphere and an in-line array of three spheres. Powder Technol. 168 (2006) 74-83
40. Gunn D.J. Transfer of heat or mass to particles in fixed and fluidized beds. Int. J. Heat Mass Transfer 21 (1978) 467-476
41. George P.L., Borouchaki H., and Laug P. An efficient algorithm for 3D adaptive meshing. Adv. Eng. Softw. 33 (2002) 377-387