A comparative microstructural investigation of nanostructured and conventional Al 2O 3 coatings deposited by plasma spraying

Journal of Thermal Spray Technology

Volumn 17, Issue 5-6, 2008, Pages 887-894

  Zois, D ^a   Lekatou, A ^b   Vardavoulias, M ^a   Panagiotopoulos, I ^b   Vazdirvanidis, A ^c  

^a PyroGenesis SA Greece   (Greece)

^b UNIVERSITY OF IOANNINA   (Greece)

^c Hellenic Centre for Metal Research   (Greece)

Author keywords

APS coatings; Influence of spray parameters; Nanopowders; Nanostructured coatings; Porosity of coatings

Indexed keywords

APS COATINGS; COATING POROSITIES; COATING PROPERTIES; COLUMNAR MORPHOLOGIES; CONVENTIONAL COATINGS; HOLLOW SPHERES; INFLUENCE OF SPRAY PARAMETERS; INTERNAL POROSITIES; MICROSTRUCTURAL INVESTIGATIONS; NANO COATINGS; NANOPARTICLE AGGLOMERATES; NANOPOWDERS; NANOSTRUCTURED; NANOSTRUCTURED COATINGS; SEMIMOLTEN PARTICLES; TWO TYPES;

AGGLOMERATION; ALUMINUM; COATINGS; DEIONIZED WATER; NANOPARTICLES; PESTICIDES; PLASMA JETS; PLASMA SPRAYING; PLASMAS; POROSITY; POWDERS; PROTECTIVE COATINGS; SPHERES; SURFACE ROUGHNESS;

SPRAYED COATINGS;

EID: 57449105662     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9268-z     Document Type: Conference Paper

References (34)

1. M. Gell, E.H. Jordan, Y.H. Sohn, D. Goberman, L. Shaw, T.D. Xiao (2001) Development and implementation of plasma sprayed nanostructured ceramic coatings. Surface and Coatings Technology 146-147, 48-54
2. K. Jia, T.E. Fischer (1996) Abrasion resistance of nanostructured and conventional cemented carbides. Wear 200, 206-214
3. H.H. Nersisyan, H.I. Won, C.W. Won, J.H. Lee (2005) Study of the combustion synthesis process of nanostructure WC and WC-Co. Materials Chemistry and Physics 94, 153-158
4. C. Berndt, E.J. Larernia: Thermal spray processing of nanoscale materials - A conference report with extended abstract. Journal of Thermal Spray Technology 7 (1998) pp. 411-440
5. B.H. Kear, G. Skandan (1997) Thermal spray processing of nanoscale materials. Nanostructured Materials 8, 765-769
6. J. Karthikeyan, C.C. Berndt, J. Tikkanen, J.Y. Wang, A.H. King, H. Herman (1997) Preparation of nanophase materials by thermal spray processing of liquid precursors. Nanostructured Materials 9, 137-140
7. J.P. Celis, A. Basak, S. Achanta, M. Vardavoulias, and P. Mateazzi, Tribology of Nanostructured Plasma Sprayed Coatings, 2nd International Conference on Nanomaterials, Sept 2005, Aver, Portugal, published in the proceedings
8. A. Tsetsekou, E. Tsioutsioulikli, N. Petsas, and M. Vardavoulias, Plasma Spray Coatings of Sol-Gel Ceramic Nanopowders, 20th International Conference on Surface Modification Technologies - SMT 20, Sept 25-29, 2006, Vienna, Austria, published in the proceedings
9. Y. Zhu, M. Huang, J. Huang, C. Ding (1999) Vacuum-plasma sprayed nanostructured titanium oxide films. Journal of Thermal Spray Technology 8, 219-222
10. 2 powders and coatings. Journal of Thermal Spray Technology 9, 483-487
11. L.L. Shaw, D. Goberman, R. Ren, M. Gell, S. Jiang, Y. Wang, T.D. Xiao, P. R. Strutt (2000) The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions. Surface & Coatings Technology 130, 1-8
12. X. Lin, Y. Zeng, X. Zheng, C. Ding (2005) Thermal Diffusivity of plasma-sprayed monolithic coating of alumina-3wt. % titania produced with nanostructured powder. Surface and Coatings Technology 195, 85-90
13. H. Chen, C.X. Ding (2002) Nanostructure zirconia coating prepared by atmospheric plasma spraying, Surface and Coatings Technology 150, 31-36
14. E.H. Jordan, M. Gell, Y.H. Sohn, D. Goberman, L. Shaw, S. Jiang, M. Wang, T.D. Xiao, Y. Wang, P. Strutt (2001) Fabrication and evaluation of plasma sprayed nanostructured alumina-titania coatings with superior properties. Materials Science Engineering A 301, 80-89
15. Y. Liu, T.E. Fischer, A. Dent (2003) Comparison of HVOF and plasma-sprayed alumina/titania coatings - microstructure, mechanical properties and abrasion behavior. Surface & Coatings Technology 167, 68-76
16. R.S. Lima, B.R. Marple (2006) From APS to HVOF spraying of conventional and nanostructured titania feedstock powders: A study on the enhancement of the mechanical properties. Surface & Coatings Technology 200, 3428-3437
17. S. Eidelman, X. Yang (1997) Three dimensional simulation of HVOF spray deposition of nanoscale materials. Nanostuctured Materials 9, 79-84
18. D. Basset, P. Mateazzi, F. Miani (1994) Measuring the impact velocities of balls in high energy ball mills. Materials Science and Engineering A 174, 71-74
19. H.P. Klug L.E. Alexander 1974 X-Ray Diffraction Procedures, 2nd ed., Wiley, N.Y., pp. 618
20. M.E. Rabanal, A. Varez, B. Levenfeld, J.M. Torralba (2003) Magnetic properties of Mg-ferrite after milling process. Journal of Materials Processing Technology 143-144, 470-474
21. C. Suryanarayana (2001) Mechanical alloying and milling. Progress in Materials Science 46, 1-184.
22. G.K. Williamson, W.H. Hall (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metallurgica 1, 22-31
23. D.L. Bish, S.A. Howard (1988) Quantitative analysis using the Rietveld method. Journal of Applied Crystallography 21, 86-91
24. 2 coatings. Materials Science and Engineering A 345, 237-245
25. R.S. Lima, A. Kucuk, C.C. Berndt (2002) Bimodal distribution of mechanical properties on plasma sprayed nanostructure partially stabilized zirconia. Materials Science and Engineering A 327, 224-232
26. R.S. Lima, B.R. Marple (2007) Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review. Journal of Thermal Spray Technology 16(1), 40-63
27. R. McPherson (1989) A review of microstructure and properties of plasma sprayed ceramic coatings. Surface & Coatings Technology 39/40, 173-181
28. B.H. Kear, P.R. Strutt (1995) Chemical processing and application for nanostructured materials. Nanostructured Materials 6, 227-236
29. 2 coating plasma spray deposited with nanocrystalline powders. Journal of Materials Processing Technology 197(1-3), 31-35
30. M. Wang, L.L. Shaw (2007) Effects of the powder manufacturing method on microstructure and wear performance of plasma sprayed alumina- titania coatings. Surface & Coatings Technology 202, 34-44
31. Z. Karoly, J. Szepvolgyi (2003) Hollow alumina microspheres prepared by RF thermal plasma. Powder Technology, 132, 211-215
32. V. Hurevich, L. Smurov, L. Pawlowski (2002) Theoretical study of the powder behaviour of porous particles in a flame during plasma spraying. Surface & Coatings Technology 151-152, 370-376
33. D. Zois, A. Lekatou, M. Vardavoulias, and A. Vazdirvanidis, Nanostructured Alumina Coatings Manufactured by Air Plasma Spraying: Correlation of Properties with the Raw Powder Microstructure, ISMANAM, 15th International Symposium on Metastable, Amorphous and Nanostructured Materials, July 6-10 2008, Buenos Aires, Argentina
34. A. Agarwal, T. McKechnie, S. Seal (2003) Net shape nanostructure aluminium oxide structures fabricated by plasma spray forming. Journal of Thermal Spray Technology 12, 350-359