TGO growth and crack propagation in a thermal barrier coating

Journal of Thermal Spray Technology

Volumn 17, Issue 5-6, 2008, Pages 858-864

  Chen, Weijie R ^a   Archer, R ^b   Huang, X ^b   Marple, B R ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b CARLETON UNIVERSITY   (Canada)

Author keywords

Crack propagation; HVOF; TBC; TGO growth

Indexed keywords

ALUMINA LAYERS; BOND COATS; HIGH TEMPERATURES; HVOF; METALLIC BOND COATS; OXIDATION BEHAVIORS; OXIDIZING ENVIRONMENTS; OXYGEN ENVIRONMENTS; SERVICE CONDITIONS; TBC; TBC SYSTEMS; TGO GROWTH; TGO GROWTHS; THERMAL BARRIER COATING SYSTEMS; THERMALLY GROWN OXIDES;

ALUMINA; CERAMIC MATERIALS; CHEMICAL OXYGEN DEMAND; CHROMIUM; COBALT; CRACK DETECTION; CRACK PROPAGATION; DURABILITY; GROWTH (MATERIALS); GROWTH KINETICS; HEAT TREATMENT; INORGANIC COATINGS; NICKEL ALLOYS; NICKEL OXIDE; NUCLEAR FUEL REPROCESSING; OXIDATION; OXYGEN; PLASTIC COATINGS; THERMAL SPRAYING;

THERMAL BARRIER COATINGS;

EID: 57449096123     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9251-8     Document Type: Conference Paper

References (26)

1. J.A. Haynes, M.K. Ferber, W.D. Porter, and E.D. Rigney: Characterization of Alumina Scales Formed During Isothermal and Cyclic Oxidation of Plasma-Sprayed TBC Systems at 1150 °C. Oxidation of Metals 52 (1999), pp31/76.
2. E.A.G. Shillington and D.R. Clarke: Spalling Failure of a Thermal Barrier Coating Associated with Aluminum Depletion in the Bond-Coat. Acta Materialia 47 (1999), pp 1297/1305.
3. A. Rabiei and A.G. Evans: Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings. Acta Materialia 48 (2000), pp3963/3976.
4. C.H. Lee, H.K. Kim, H.S. Choi, and H.S. Ahn: Phase Transformation and Bond Coat Oxidation Behavior of Plasma-Sprayed Zirconia Thermal Barrier Coating. Surf. Coat. Technol. 124 (2000), pp1/12.
5. L. Ajdelsztajn, J.A. Picas, G.E. Kim, F.L. Bastian, J. Schoenung, and V. Provenzano: Oxidation Behavior of HVOF Sprayed Nanocrystalline NiCrAlY Powder. Mater. Sci. Eng. A338 (2002), pp 33/43.
6. W.R. Chen, X. Wu, P.C. Patnaik, and J.-P. Immarigeon, Oxidation Behaviour of a Plasma-Sprayed Thermal Barrier Coating System, Proceedings from the 1st International Surface Engineering Congress and the 13th IFHTSE Congress (Columbus, Ohio), 2002, p 535-543
7. R.A. Miller and C.E. Lowell: Failure Mechanisms of Thermal Barrier Coatings Exposed to Elevated Temperatures. Thin Solid Films 95 (1982), pp265/273.
8. C.H. Hsueh, P.F. Becher, E.R. Fuller, S.A. Langer, and W.C. Carter: Surface-Roughness Induced Residual Stresses in Thermal Barrier Coatings: Computer Simulations. Materials Science Forum 308-311 (1999), pp442/449.
9. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit: Mechanisms Controlling the Durability of Thermal Barrier Coatings. Progress in Materials Science 46 (2001), pp505/553.
10. K.W. Schlichting, N.P. Padture, E.H. Jordan, and M. Gell: Failure Modes in Plasma-Sprayed Thermal Barrier Coatings. Mater. Sci. Eng. A342 (2003), pp120/130.
11. D. Monceau, F. Crabos, A. Malié, and B. Pieraggi: Effects of Bond-Coat Preoxidation and Surface Finish on Isothermal and Cyclic Oxidation, High Temperature Corrosion and Thermal Shock Resistance of TBC Systems. Materials Science Forum 369-372 (2001), pp607/614.
12. S. Takahashi, M. Yoshiba, and Y. Harada: Failure Analysis of High-Temperature Oxidation for Plasma Sprayed Thermal Barrier Coating Systems with Different Coating Characteristics. Materials Science Forum 461-464 (2004), pp367/374.
13. W.R. Chen, X. Wu, D. Dudzinski, and P.C. Patnaik: Modification of Oxide Layer in Plasma-Sprayed Thermal Barrier Coatings. Surf. Coat. Technol. 200 (2006), pp5863/5868.
14. 2O Atmospheres. Surf. Coat. Technol. 82 (1996), pp133/144.
15. H. Lau, C. Leyens, U. Schulz, and C. Friedrich: Influence of Bondcoat Pre-treatment and Surface Topology on the Lifetime of EB-PVD TBCs. Surf. Coat. Technol. 165 (2003), pp217/223.
16. V.K. Tolpygo and D.R. Clarke: The Effect of Oxidation Pre-treatment on the Cyclic Life of EB-PVD Thermal Barrier Coatings with Platinum-Aluminide Bond Coats. Surf. Coat. Technol. 200 (2005), pp1276/ 1281.
17. T.J. Nijdam, L.P.H. Jeurgens, J.H. Chen, and W.G. Sloof: On the Microstructure of the Initial Oxide Grown by Controlled Annealing and Oxidation on a NiCoCrAlY Bond Coating. Oxidation of Metals 64 (2005), pp 355/377.
18. T.J. Nijdam, G.H. Marijnissen, E. Vergeldt, A.B. Kloosterman, and W.G. Sloof: Development of a Pre-Oxidation Treatment to Improve the Adhesion between Thermal Barrier Coatings and NiCoCrAlY Bond Coatings. Oxidation of Metals 66 (2006), pp 269/294.
19. F.S. Pettit: Oxidation Mechanisms for Nickel-Aluminum Alloys at Temperatures Between 900 and 1300 °C. Transactions of the Metallurgical Society of AIME 239 (1967), pp 1296/1305.
20. W.R. Chen, X. Wu, B.R. Marple, and P.C. Patnaik: The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating. Surf. Coat. Technol. 201 (2006), pp 1074/1079.
21. S.M. Meier, D.M. Nissley, and K.D. Sheffler, Thermal Barrier Coating Life Prediction Model Development, ASME 91-GT-40, International Gas Turbine and Aeroengine Congress and Exposition (Orlando, FL), 1991
22. W. Brandl, H.J. Grabke, D. Toma, and J. Krüger: The Oxidation Behaviour of Sprayed MCrAlY Coatings. Surf. Coat. Technol. 86-87 (1996), pp 41/47.
23. K.S. Chan and N.S. Cheruvu, Degradation Mechanism Characterization and Remaining Life Prediction for NiCoCrAlY Coatings, GT2004-53383, Proceedings of ASME Turbo Expo 2004, Power for Land, Sea, and Air (Vienna, Austria), 2004
24. W.R. Chen, X. Wu, B.R. Marple, R.S. Lima, and P.C. Patnaik, Pre-Oxidation and TGO Growth Behaviour of an Air-Plasma-Sprayed Thermal Barrier Coating, Surf. Coat. Technol., 2008, 202, p 3787-3796
25. Y. Zhang, B.A. Pint, G.W. Garner, K.M. Cooley, and J.A. Haynes: Effect of Cycle Length on the Oxidation Performance of Iron Aluminide Coatings. Surf. Coat. Technol. 188-189 (2004), pp 35/40.
26. D. Zhu, S.R. Choi, and R.A. Miller: Development and Thermal Fatigue Testing of Ceramic Thermal Barrier Coatings. Surf. Coat. Technol. 188-189 (2004), pp146/152.