Cross-linked glenoid prosthesis: A wear comparison to conventional glenoid prosthesis with wear particulate analysis

Journal of Shoulder and Elbow Surgery

Volumn 18, Issue 1, 2009, Pages 130-137

  Wirth, Michael A ^a   Klotz, Conrad ^b   Deffenbaugh, Daren L ^b   McNulty, Don ^b   Richards, Laura ^c   Tipper, Joanne L ^c  

^a UNIVERSITY OF TEXAS HEALTH SCIENCE CENTER AT SAN ANTONIO   (United States)

^b Johnson Johnson Company   (United States)

^c UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE;

ARM PROSTHESIS; ARTICLE; BIOMECHANICS; CLINICAL ASSESSMENT; COMPARATIVE STUDY; CROSS LINKED GLENOID PROSTHESIS; DAILY LIFE ACTIVITY; KINEMATICS; MECHANICAL STRESS; PRIORITY JOURNAL; PROSTHESIS LOOSENING; PROSTHESIS MATERIAL; SIMULATOR;

ARTHROPLASTY, REPLACEMENT; BIOMECHANICS; HUMANS; JOINT DISEASES; JOINT PROSTHESIS; POLYETHYLENES; PROGNOSIS; PROSTHESIS DESIGN; SHOULDER JOINT;

EID: 57449084684     PISSN: 10582746     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jse.2008.06.015     Document Type: Article

References (38)

1. Anglin C., and Wyss U.P. Arm motion and load analysis of sit-to-stand, stand-to-sit, cane walking and lifting. Clin Biomech (Bristol, Avon) 15 (2000) 441-448
2. Anglin C., Wyss U., and Pichora D.R. Glenohumeral contact forces. Proc Inst Mech Eng (H) 214 (1999) 637-644
3. Anglin C., Wyss U.P., and Pichora D.R. Shoulder prosthesis subluxation: theory and experiment. J Shoulder Elbow Surg 9 (2000) 104-114
4. Anglin C., Wyss U.P., and Pichora D.R. Mechanical testing of shoulder prosthesis and recommendations for glenoid design. J Shoulder Elbow Surg 9 (2000) 323-331
5. ASTM F1378-04. Standard specifications for shoulder prosthesis (2004), American Society for Testing and Materials, West Conshohocken (PA)
6. ASTM F1829-98. Standard test method for static evaluation of the glenoid locking mechanism in shear (2003), American Society for Testing and Materials, West Conshohocken (PA)
7. ASTM F1877-98. Standard practice for characterization of particles (2003), American Society for Testing and Materials, West Conshohocken (PA)
8. ASTM F2028-05. Standard test methods for dynamic evaluation of glenoid loosening or disassociation (2005), American Society for Testing and Materials, West Conshohocken (PA)
9. ASTM F04.22 Arthroplasty subcommittee meeting minutes. November 2004. Washington, DC. Available at: URL: http://www.astm.org. Accessed April 2, 2008.
10. Bergmann G., Graichen F., and Rohlmann A. Hip joint loading during walking and running measured in two patients. J Biomech 26 (1993) 969-990
11. Fisher J., Bell J., Barbour P.S., Tipper J.L., Matthews J.B., Besong A.A., et al. A novel method for the prediction of functional biological activity of polyethylene wear debris. Proc Inst Mech Eng [H] 215 (2001) 127-132
12. Galvin A.L., Tipper J.L., Ingham E., and Fisher J. Nanometre size wear debris generated from cross-linked and non-cross-linked ultra high molecular weight polyethylene in artificial joints. Wear 259 (2005) 977-983
13. Green T.R., Fisher J., Matthews J.B., Stone M.H., and Ingham E. Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles. J Biomed Mater Res 53 (2000) 490-497
14. Harris W.H., and Muratoglu O.K. A review of current crosslink PE used in total joint arthroplasty. Clin Orthop Relat Res (2005) 46-52
15. Harryman II D.T., Sidles J.A., Clark J.M., McQuade K.J., Gibb T.D., and Matsen III F.A. Translation of the humeral head on the glenoid with passive glenohumeral motion. J Bone Joint Surg Am 72 (1990) 1334-1343
16. Hasan S.S., Leith J.M., Campbell B., Kapil R., Smith K., and Matsen III F.A. Characteristics of unsatisfactory shoulder arthroplasties. J Shoulder Elbow Surg 11 (2002) 431-444
17. Heisel C., Silva M., Rosa M.A., and Schmalzried T.P. Short-term in vivo wear of cross-linked polyethylene. J Bone Joint Surg Am 86 (2004) 748-751
18. International Organization for Standardization. ISO 14242-1. Implants for surgery-wear of total hip-joint prostheses-part 1: loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test. 1st ed. Geneva, Switzerland; 2002. Available at: URL: http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=23257. Accessed April 2, 2008.
19. International Organization for Standardization. ISO 14243-1. Implants for surgery-wear of total knee-joint prostheses-part 1: loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test. 1st ed. Geneva, Switzerland; 2002. Available at: URL: http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=23256. Accessed April 2, 2008.
20. Johnston R.C., and Smidt G.L. Measurement of hip joint motion during walking. J Bone Joint Surg Am 51 (1969) 1082-1094
21. Karduna A.R., Williams G.R., Iannotti J.P., and Williams J.L. Joint stability after total shoulder arthroplasty in a cadaver model. J Shoulder Elbow Surg 6 (1997) 506-511
22. Karduna A.R., Williams G.R., Iannotti J.P., and Williams J.L. Total shoulder arthroplasty biomechanics: a study of the forces and strains at the glenoid component. J Biomech Eng 120 (1998) 92-99
23. Kelkar R., Wang V., Flatow E., Newton P., Ateshian G., Bigliani L., et al. Glenohumeral mechanics: a study of articular geometry, contact and mechanics. J Shoulder Elbow Surg 10 (2001) 73-84
24. Mabrey J.D., Afsar-Keshmiri A., Engh G., Sychterz C.J., Wirth M.A., Rockwood C.A., et al. Standardized analysis of UHMWPE wear particles from failed total joint arthroplasties. J Biomed Mater Res 63 (2002) 475-483
25. Mahfousz M., Nicholson G., Komistek R., Hovis D., and Kubo M. In vivo determination of the dynamics of normal, rotator cuff-deficient, total, and reverse replacement shoulders. J Bone Joint Surg Am 87 Suppl 2 (2005) 107-113
26. Mansat M., and Egan J. The biomechanics of the glenohumeral articulation and implications for prosthetic design. In: Poitout D.G. (Ed). Biomechanics and biomaterials in orthopaedics (2004), Springer, London 387-396
27. Matsen III F.A., Rockwood Jr. C.A., Wirth M.A., Lippitt S.B., and Parsons M. Glenohumeral arthritis and its management. In: Rockwood Jr. C.A., Matsen III F.A., Wirth M.A., and Lippitt S.B. (Eds). The shoulder. 3rd ed. (2004), Saunders, Philadelphia p. 879-1007
28. McKellop H., Shen F., Lu B., Campbell P., and Salovey R. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacement. J Orthop Res 17 (1999) 157-167
29. Poppen N.K., and Walker P.S. Forces at the glenohumeral joint in abduction. Clin Orthop Relat Res (1978) 165-170
30. Poppen N.K., and Walker P.S. Normal and abnormal motion of the shoulder. J Bone Joint Surg Am 58 (1976) 195-201
31. Rockwood Jr. C.A., and Wirth M.A. Observation on retrieved Hylamer glenoids in shoulder arthroplasty: problems associated with sterilization by gamma irradiation in air. J Shoulder Elbow Surg 11 (2002) 191-197
32. Scarlet M.M., and Matsen III F.A. Observations on retrieved polyethylene glenoid components. J Arthroplasty 16 (2001) 795-801
33. Sethi R.K., Neavyn M.J., Rubash H.E., and Shanbhag A.S. Macrophage response to crosslink and conventional UHMWPE. Biomaterials 24 (2003) 2561-2573
34. Severt R., Thomas B., Tsenter M., Amstutz H., and Kabo J. The influence of conformity and constraint on translational forces and frictional torque in total shoulder arthroplasty. Clin Orthop Relat Res (1993) 151-158
35. Tipper J.L., Galvin A.L., Williams S., McEwen H.M.J., Stone M.H., Ingham E., et al. Isolation and characterization of UHMWPE wear particles down to ten nanometers in size from in vitro hip and knee joint simulators. J Biomed Mater Res A 78 (2006) 473-480
36. Tipper J.L., Ingham E., Hailey J.L., Besong A.A., Fisher J., Wroblewski B.M., et al. Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses. J Mater Sci Mater Med 11 (2000) 117-124
37. Veeger H.E.J., Magermans D.J., Nagles J., Chadwick E.K.J., and van der Helm F.C.T. A kinematical analysis of the shoulder after arthroplasty during a hair combing task. Clin Biomech (Bristol, Avon) 21 Suppl 1 (2006) 39-44
38. Wirth M.A., Agrawal C.M., Mabrey J.D., Dean D.D., Blanchard C.R., Miller M.M., et al. Isolation and characterization of polyethylene wear debris association with osteolysis following total shoulder arthroplasty. J Bone Joint Surg Am 81 (1999) 29-37