Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites

Polymer Composites

Volumn 18, Issue 4, 1997, Pages 433-441

  Kolařík, Jan ^a  

^a INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Czech Republic)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 5744227013     PISSN: 02728397     EISSN: None     Source Type: Journal    
DOI: 10.1002/pc.10295     Document Type: Article

References (68)

1. J. E. Ashton, J. C. Halpin, and P. H. Petit, Primer on Composite Materials Analysis. Technomic, Stamford, Conn. (1969).
2. J. R. Vinson and T.-W. Chou. Composite Materials and Their Use In Structures. Applied Science Publ., London (1975).
3. S. W. Tsai, J. C. Halpin, and N. J. Pagano, Composite Materials Workshop. Technomic. Stamford. Conn. (1968).
4. R. M. Jones, Mechanics of Composite Materials, Scripta Book Co., New York (1975).
5. B. D. Agarwal and L. Broutman. Analysis and Performance of Fiber Composites. Wiley-Interscience, New York (1980).
6. M. R. Piggott, Load-Bearing Fibre Composites. Pergamon. Oxford. England (1980).
7. L. E. Nielsen, Mechanical Properties of Polymers and Composites, M. Dekker, New York (1974).
8. R. M. Christensen, Mechanics of Composite Materials. Wiley, New York (1979).
9. R. P. Sheldon, Composite Polymeric Materials, Appl. Sci. Publ., Barking (Essex) (1982).
10. B. E. Read and G. D. Dean, The Determination of Dynamic Properties of Polymer and Composites. Hilger, Briatol (1978).
11. M. O. W. Richardson, Polymer Engineering Composites, Appl. Sci. Publ., London (1977).
12. J. C. Halpin and J. L. Kardos, Polym. Eng. Sci., 16, 344 (1976).
13. J. C. Halpin and J. L. Kardos. Polym. Eng. Sci., 18, 496 (1978).
14. J. L. Kardos, Crit. Rev. Solid State Sci., 3, 419 (1973).
15. M. J. Folkes, Short Flore Reinforced Thermoplastics, Wiley, Chichester, U.K. (1982).
16. S. McGee and R. L. McCullough. Polym. Compos., 2, 149 (1981).
17. V. Flaris and Z. H. Stachurski. J. Appl. Polym. Sci., 45, 1789 (1992).
18. C. B. Bucknall, Toughened Plastics, Appl Sci. Publ., London (1977).
19. M. Takayanagi, Mem. Fac. Eng. Kyushu Univ., 23, 41 (1963).
20. L. E. Nielsen, Rheol. Acta, 13, 86 (1974).
21. J. Kolařík. B. Pukánszky, F. Lednický. and M. Pegoraro. Polym. Eng. Sci., 32, 886 (1992).
22. H. K. Chuang and C. D. Han, J. Appl. Polym. Sci., 30, 165 (1985).
23. J. H. Petropoulos. Adv. Polym. Sci., 64, 93 (1985).
24. Y. Geerts, S. Gillard, and G. Geuskens, Eur. Polym. J., 22, 143 (1996).
25. Z. Hashin in Mechanics of Composite Materials. F. We??dt, H. Liebowitz. and N. Perone, eds., Pergamon Press, New York (1970).
26. J. Kolařík, G. C. Locati, L. Fambri, and A. Penati. Polym. Networks Blends, In press.
27. E. H. Kerner, Proc. Phys. Soc., 69B, 808 (1956).
28. J. Kolařík, G. L. Agrawal, Z. Kruliš, and J. Kovář, Polym. Compos., 7, 463 (1986).
29. J. Kolařík, J. Velek, G. L. Agrawal, and I. Fortelný, Polym. Compos., 7, 472 (1986).
30. J. N. Farber and R. J. Farris, J. Appl. Polym. Sci., 34, 2093 (1987).
31. J. C. Smith, Polym. Eng. Sci., 16, 394 (1976).
32. T. L. Smith, Trans. Soc. Rheol., 3, 113 (1959).
33. L. E. Nielsen, J. Compos. Mater., 1, 100 (1967).
34. L. Nicolais and M. Narkis, Polym. Eng. Sci., 11, 194 (1971).
35. F. Danusso and G. Tieghi, Polymer, 27, 1385 (1986).
36. B. Pukanszky, B. Turcsanyi, and F. Tudos. in Interfaces in Polymer, Ceramic, and Metal Matrix Composites, H. Ishida, ed., Elsevier, New York (1988).
37. B. Pukanszky, Composites, 21, 255 (1990).
38. B. Pukanszky and F. Tudos, Makromol. Chem., Macromol. Symp., 38, 221 (1990).
39. J. Leidner and R. F. Woodhams, J. Appl. Polym. Sci., 18, 1639 (1974).
40. J. Jančář, M. Kummer, and J. Kolařík, in Interfaces in Polymer, Ceramic, and Metal Matrix Composites, H. Ishida, ed., Elsevier, New York (1988).
41. L. A. Utracki, J. Rheol., 35, 1615 (1991).
42. J. Lyngaae-Jorgensen and L. A. Ulracki, Makromol. Chem., Macromol. Symp., 48/49, 189 (1991).
43. R. Hill, J. Mech. Phys. Solids. 13, 213 (1965).
44. J. Kolařík, Polym. Eng. Sci., 36, 2518 (1996).
45. P. G. De Gennes, J. Phys. Lett. (Paris). 37, L1 (1976).
46. J. Lyngaae-Jorgensen, A. Kuta, K. Sondergaard, and K. V. Poulsen, Polym. Networks Blends. 3, 1 (1993).
47. J. Kolařík and G. Geuskens, Polym. Networks Blends. 7, 13 (1997).
48. S. Wu, Polym. Int., 29, 229 (1992).
49. D. R. Paul and S. Newman, eds., Polymer Blends, Academic Press, New York (1978).
50. J. A. Manson and L. H. Sperling. Polymer Blends and Composites, Plenum Press, New York (1976).
51. J. Kolařík, F. Lednický, G. C. Locati, and L. Fambri, Polym. Eng. Sci., 37, 128 (1997).
52. M. Takayanagi, S. Minami, and S. Uemara, J. Polym. Sci., C5, 113 (1964).
53. D. Kaplan and N. W. Tschoegl, Polym. Eng. Sci., 14, 43 (1974).
54. R. A. Dickie in Polymer Blends, D. R. Paul and S. New-man, eds., Academic Press, New York (1976).
55. R. E. Cohen and A. R. Ramos, J. Macromol. Sci. Phys., B17, 625 (1980).
56. P. E. Tomlins and B. E. Read. Plast. Rubber Compos. Process. Appl., 16, 17 (1991).
57. I. S. Miles and A. Zurek, Polym. Eng. Sci., 28, 796 (1988).
58. J. Kolařík, Polymer, 35, 3631 (1994).
59. J. Kolařík, Polym. Networks Blends. 5, 87 (1995).
60. J. Kolařík, Polymer, 37, 887 (1996).
61. J. W. Teh. J. Appl. Polym. Sci., 28, 605 (1983).
62. B. Pukanszky and F. Tudos. Makromol. Chem., Macromol. Symp., 38, 221 (1990).
63. M. J. Iremonger and J. P. Lawler, J. Appl. Polym. Sci., 25, 805 (1980).
64. A. N. Gent and A. G. Thomas, J. Appl. Polym. Sci., 1, 107 (1959).
65. R. A. Dickie, J. Polym. Sci., Polym. Phys., 14, 2073 (1976).
66. J. C. Smith, J. Res. NBS. 78A, 355 (1974).
67. I. Soos, Y. Nagase, W. I. Lenggoro, and H. Kodaka, J. Polym. Eng., 16, 73 (1996).
68. J. Jančář, A. DiAnselmo and A. T. DiBenedetto. Polym. Eng. Sci., 32, 1394 (1992).