A microslip friction model for the analysis of frictionally damped turbine blades

Institution of Mechanical Engineers - 9th International Conference on Vibrations in Rotating Machinery

Volumn 1, Issue , 2008, Pages 185-199

  Cigeroglu E ^a   Menq, C H ^b  

^a MIDDLE EAST TECHNICAL UNIVERSITY   (Turkey)

^b The Ohio State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CURVE FITTING; DAMPING; DISKS (STRUCTURAL COMPONENTS); ELECTRIC GENERATORS; FRICTION; LATTICE VIBRATIONS; MACHINERY; NANOFLUIDICS; NUMERICAL ANALYSIS; ROTATING DISKS; ROTATING MACHINERY; ROTATION; SEALS; SLIP FORMING; STIFFNESS; STRESSES; THREE DIMENSIONAL; TRIBOLOGY; TURBINES; TURBOMACHINE BLADES; VIBRATIONS (MECHANICAL);

ANALYTICAL SOLUTIONS; BLADED DISKS; CENTRIFUGAL FORCES; CONTACT AREAS; CONTACT FRICTIONS; CONTACT INTERFACES; CONTACT PRESSURES; CONTACT STIFFNESSES; CONTACT STRESSES; CONTINUOUS DISTRIBUTIONS; CONTINUOUS FUNCTIONS; DAMPER SYSTEMS; DISK SYSTEMS; ELASTIC MODES; FINITE ELEMENTS; FORCED RESPONSE ANALYSES; FORCED RESPONSES; FREQUENCY SHIFTS; FRICTION CONTACT MODELS; FRICTION MODELS; FRICTION STATES; HARMONIC BALANCE METHODS; INITIAL CONTACTS; MODE SHAPES; MULTIPLE CONTACTS; NORMAL FORCES; NORMAL PRESSURES; NORMAL STRESSES; PARTIAL SLIPS; PRELOAD; RELATIVE MOTIONS; RIGID BODIES; STATIC CONTACTS; TURBINE BLADES;

MODAL ANALYSIS;

EID: 57349170773     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (31)

1. J.H. Griffin, 'Friction damping of resonant stresses in gas turbine engine airfoils', Journal of Engineering for Power-Transactions of the ASME 102, 1980, 329-333.
2. E.H. Dowell, H.B. Schwartz, 'Forced response of a cantilever beam with a dry friction damper attached, part I: theory', Journal of Sound and Vibration 91, 1983, 255-267.
3. T.M. Cameron, J.H. Griffin, R.E Kielb, T.M. Hoosac, 'An integrated approach for friction damper design', Journal of Vibration, Acoustics, Stress, and Reliability in Design-Transactions of the ASME 112, 1990, 175-182.
4. A.A. Ferri, 'Friction damping and isolation systems', Journal of Vibration and Acoustics- Transactions of the ASME 117(B), 1996, 196-206.
5. B.D. Yang, and C. H. Menq, 1997, 'Modeling of Friction Contact and Its Application to the Design of Shroud Contact', Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 119(4), pp. 958-963.
6. E.P. Petrov, 'Method for direct parametric analysis of nonlinear forced response of bladed disks with friction contact interfaces', Journal Of Turbomachinery-Transactions Of The ASME, 126 (4), 2004, pp. 654-662.
7. D. Charleux, C. Gibert, F. Thouverez, J. Dupeux, 'Numerical and experimental study of friction damping in blade attachments of rotating bladed disks', International Journal of Rotating Machinery, 2006, ID 71302, pp. 1-13.
8. E. Cigeroglu, N. An, C-H. Menq, 'Forced response prediction of constrained and unconstrained structures coupled through frictional contacts', Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, Submitted for publication.
9. C.-H. Menq, J. Bielak, J.H. Griffin, The influence of microslip on vibratory response-part I: a new microslip model, Journal of Sound and Vibration 107 (1986) 279-293.
10. C.-H. Menq, J. Bielak, J.H. Griffin, 'The influence of microslip on vibratory response-part II: a comparison with experimental results', Journal of Sound and Vibration, 107,1986, pp. 295-307.
11. G. Csaba, Forced response analysis in time and frequency domains of a tuned bladed disk with friction dampers, Journal of Sound and Vibration, 214, 1998, pp. 395-412.
12. K.Y. Sanliturk, M. Imregun, D.J. Ewins, Harmonic balance vibration analysis of turbine blades with friction dampers, Journal of Vibration and Acoustics, 119, 1997, pp. 96-103.
13. E. Cigeroglu, W. Lu, C.H. Menq, 'One-dimensional dynamic microslip friction model', Journal of Sound and Vibration 292, 2006, 881-898.
14. E. Cigeroglu, N. An, C.H. Menq, A microslip friction model with normal load variation induced by normal motion, Nonlinear Dynamics, 50 (3), 2007, pp. 609-626.
15. D.D. Quinn, D.J. Segalman, 'Using series-series Iwan-type models for understanding joint dynamics', Journal of Applied Mechanics, 72, 2005, pp. 666-673.
16. S. Filippi, A. Akay, M.M. Gola, 'Measurement of tangential contact hysteresis during microslip', Journal of. Tribology, 126, 2004, pp. 482-489.
17. K-H. Koh, S. Filippi, J.H. Griffin, A. Akay, 'Characterization of turbine blade friction dampers', Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 127, 2005, pp. 856-862.
18. J.J. Chen, C.H. Menq, 'Periodic response of blades having three-dimensional nonlinear shroud constraints', Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 123, 2001, 901-909.
19. B.D. Yang, C.H. Menq, Characterization of contact kinematics and application to the design of wedge dampers in turbomachinery blading: Part 1 - stick-slip contact kinematics, Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 120, 2006, 410-417.
20. B.D. Yang, C.H. Menq, Characterization of contact kinematics and application to the design of wedge dampers in turbomachinery blading: Part 2 - prediction of forced response and experimental verification, Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 120, 2006, 418-423.
21. K.Y. Sanliturk, D.J. Ewins, A.B. Stanbridge, Underplatform dampers for turbine blades: theoretical modeling, analysis, and comparison with experimental data, Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 123, 2001, 919-929.
22. F. Pfeiffer, M. Hayek, Stick-slip motion of turbine blade dampers, Philosophical Transactions of the Royal Society, London, A338, 1992, 503-517.
23. W. Sextro, K Popp, T Walter, Improved reliability of bladed disks to friction dampers, ASME International Gas Turbine and Aeroengine Congress and Exposition, Orlando, June 1997.
24. G. Csaba, Modeling of a microslip friction damper subjected to translation and rotation, ASME International Gas Turbine Conference, Indianapolis, June 1999.
25. Jareland, M. H, Experimental Investigation of a Platform Damper with Curved Contact Areas, ASME Design Engineering Conference, Pittsburg, 2001.
26. L. Panning, W. Sextro, K. Popp, Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers, International Journal of Rotating Machinery, 9 (2003) 219-228.
27. D. Laxaldea, F. Thouvereza, J.-J. Sinoua, J.-P. Lombard, 'Qualitative analysis of forced response of blisks with friction ring dampers', European Journal of Mechanics-A/Solids, 26 (4), 2007, pp. 676-687
28. B.D. Yang, M.L. Chu, C.H. Menq, Stick-slip-separation analysis and non-linear stiffness and damping characterization of friction contacts having variable normal load, Journal of Sound and Vibration 210, 1998, 461-481.
29. K.Y. Sanliturk, D.J. Ewins, Modeling two-dimensional friction contact and its application using harmonic balance method, Journal of Sound and Vibration, 193, 1996, 511-523.
30. C.H. Menq, B.D. Yang, Non-linear spring resistance and friction damping of frictional constraints having two-dimensional motion, Journal of Sound and Vibration, 217, 1998, 127-143.
31. B.D. Yang, C.H. Menq, Characterization of 3D contact kinematics and prediction of resonant response of structures having 3D frictional constraint, Journal of Sound and Vibration 217, 1998, 909-925.