Numerical studies on the effect of transverse speed in friction stir welding

Materials and Design

Volumn 30, Issue 3, 2009, Pages 900-907

  Zhang, Z ^a   Zhang, H W ^a  

^a STATE KEY LABORATORY OF STRUCTURAL ANALYSIS FOR INDUSTRIAL EQUIPMENT   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ADVANCING SIDES; FORMATION OF WELDS; FRICTION STIR WELDING; FULLY COUPLED THERMO-MECHANICAL MODELS; MATERIAL PARTICLES; NUGGET ZONES; NUMERICAL STUDIES; RETREATING SIDES; STIRRING EFFECTS; TEMPERATURE RISES; TOP SURFACES; WELD FLAWS; WELDING TOOLS;

DEFORMATION; ELECTRIC WELDING; FRICTION; FRICTION WELDING; GAS WELDING; NUMERICAL ANALYSIS; PLASTIC DEFORMATION; REAL TIME SYSTEMS; SPEED; TRIBOLOGY; WELDS;

WELDING;

EID: 57149141684     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2008.05.029     Document Type: Article

References (28)

1. Thomas WM, Nicholas ED, Need Ham JC, Murch MG, Templesmith P, Dawes CJ. Friction stir welding. International Patent Application No. PCT/GB92102203 and Great Britain Patent Application No. 9125978.8; 1991.
2. Mishra R.S., and Ma Z.Y. Friction stir welding and processing. Mater Sci Eng R 50 (2005) 1-78
3. Zhang H.W., Zhang Z., and Chen J.T. The finite element simulation of the friction stir welding process. Mater Sci Eng A 403 (2005) 340-348
4. Ramirez A.J., and Juhas M.C. Microstructural evolution in Ti-6Al-4V friction stir welds. Mater Sci Forum 426-432 (2003) 2999-3004
5. Su J.Q., Nelson T.W., Mishra R., and Mahoney M. Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Mater 51 (2003) 713-729
6. Salem H.G., Reynolds A.P., and Lyons J.S. Microstructure and retention of superplasticity of friction stir welded superplastic 2095 sheet. Scripta Mater 46 (2002) 337-342
7. Liu H.J., Chen Y.C., and Feng J.C. Effect of zigzag line on the mechanical properties of friction stir welded joints of an Al-Cu alloy. Scripta Mater 55 3 (2006) 231-234
8. Ma Z.Y., Sharma S.R., and Mishra R.S. Effect of friction stir processing on the microstructure of cast A356 aluminum. Mater Sci Eng A 433 (2006) 269-278
9. Cavaliere P., Campanile G., Panella F., and Squillace A. Effect of welding parameters on mechanical and microstructural properties of AA6056 joints produced by friction stir welding. J Mater Process Technol 180 (2006) 263-270
10. Cavaliere P., Squillace A., and Panella F. Effect of welding parameters on mechanical and microstructural properties of AA6082 joints produced by friction stir welding. J Mater Process Technol 200 (2008) 364-372
11. Elangovan K., and Balasubramanian V. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy. J Mater Process Technol 200 (2008) 163-175
12. Peel M., Steuwer A., Preuss M., and Withers P.J. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater 51 (2003) 4791-4801
13. Zhang H.W., Zhang Z., and Chen J.T. 3D modeling of material flow in friction stir welding under different process parameters. J Mater Process Technol 183 (2007) 62-70
14. Zhang Z, Chen JT, Zhang HW. The 3D simulation of friction stir welding process. In: Batra RC, Qian LF, Zhang YL, Li XN, Tso SK, editors. International conference on mechanical engineering and mechanics, Nanjing, China; 2005. p. 1388-1342.
15. Zhang H.W., and Zhang Z. Numerical modeling of friction stir welding process by using rate-dependent constitutive model. J Mater Sci Technol 23 1 (2007) 73-80
16. Zhang H.W., Zhang Z., Bie J., Zhou L., and Chen J.T. Effect of viscosity on material behaviors in friction stir welding process. Trans Nonferr Metal Soc China 16 (2006) 1045-1052
17. Zhang HW, Zhang Z. Numerical simulation of friction stir welding by using semi-coupled model. In: Hu P, Reddy JN, editors. International conference on enhancement and promotion of computational methods in engineering science and mechanics, Changchun, China. August 10-12; 2006. p. 52-62.
18. Deng X.M., and Xu S.W. Two-dimensional finite element simulation of material flow in friction stir welding process. J Manuf Process 6 2 (2004) 125-133
19. Xu S., Deng X., Reynolds A.P., and Seidel T.U. Finite element simulation of material flow in friction stir welding. Sci Technol Weld Join 6 3 (2001) 191-193
20. Nandan R., Roy G.G., Lienert T.J., and Debroy T. Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel. Science and Technology of Welding and Joining 11 5 (2006) 526-537
21. Long T., and Reynolds A.P. Parametric studies of friction stir welding by commercial fluid dynamics simulation. Sci Technol Weld Join 11 2 (2006) 200-208
22. Buffa G., Hua J., Shivpuri R., and Fratini L. Design of the friction stir welding tool using the continuum based FEM model. Mater Sci Eng A 419 (2006) 381-388
23. Colegrove P.A., and Shercliff H.R. Development of Trivex friction stir welding tool Part II - three-dimensional flow modelling. Sci Technol Weld Join 9 4 (2004) 352-361
24. Schmidt H., and Hattel J. A local model for the thermo-mechanical conditions in friction stir welding. Modell Simulation Mater Sci Eng 13 (2005) 77-93
25. Zhang Z., and Zhang H.W. Numerical studies on the effect of axial pressure in friction stir welding. Sci Technol Weld Join 12 3 (2007) 226-248
26. Zhang Z., and Zhang H.W. Material behaviors and mechanical features in friction stir welding process. Int J Adv Manufact Technol 35 (2007) 86-100
27. McClure JC, Feng Z, Tang W, Gould JE, Murr LE, Guo X. A thermal model of friction stir welding. In: Proceedings of the 5th international conference on trends in welding research, Pine Mountain, GA; 1998.
28. Guerra M., Schmidt C., McClure J.C., Murr L.E., and Nunes A.C. Flow patterns during friction stir welding. Mater Characteriz 49 (2003) 95-101