A three-dimensional damage model for transversely isotropic composite laminates

Journal of Composite Materials

Volumn 42, Issue 25, 2008, Pages 2717-2745

  Maimi, P ^a   Mayugo, J A ^a   Camanho, P P ^b  

^a UNIVERSITY OF GIRONA   (Spain)

^b UNIVERSITY OF PORTO   (Portugal)

Author keywords

Damage mechanics; FEA; Fracture

Indexed keywords

CARBON FIBER REINFORCED PLASTICS; COMPOSITE MATERIALS; CONTINUUM MECHANICS; CRACK CLOSURE; CRACKS; LAMINATED COMPOSITES; LAMINATES; POLYMER MATRIX COMPOSITES; POLYMERS; STIFFNESS MATRIX; THREE DIMENSIONAL;

CONTINUUM DAMAGE MODELS; DAMAGE MECHANICS; DAMAGE MODELS; DISSIPATED ENERGIES; EXPERIMENTAL DATUMS; FEA; FINAL FAILURES; FINITE ELEMENT CODES; INTERLAMINAR FAILURES; ISOTROPIC LAMINATES; MODEL PREDICTIONS; REINFORCED POLYMER COMPOSITES; RESIDUAL STIFFNESSES; TRANSVERSE MATRIX CRACKS; TRANSVERSELY ISOTROPIC; UNDER LOADS;

FINITE ELEMENT METHOD;

CARBON FIBERS; CRACKS; DAMAGE; FINITE ELEMENT ANALYSIS; FRACTURE; LAMINATES; REINFORCED PLASTIC; THREE DIMENSIONAL DESIGN;

EID: 57049170403     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998308094965     Document Type: Article

References (67)

1. Harris, C.E., Starnes, J.H. and Shuart, M.J. (2001). An Assessment of the State-of-the-art in the Design and Manufacturing of Large Composite Structures for Aerospace Vehicles, NASA TM-2001-210844.
2. Krueger, R., Paris, I.L., O'Brien, T.K. and Minguet, P.J. (2002). Comparison of 2D Finite Element Modeling Assumptions with Results from 3D Analysis for Composite Skin-stiffener Debonding, Composite Structures, 57: 161-168.
3. Alfano, G. and Crisfield, M.A. (2001). Finite Element Interface Models for the Delamination Analysis of Laminated Composites: Mechanical and Computational Issues, International Journal for Numerical Methods in Engineering, 50: 1701-1736.
4. Allix, O. and Corigliano, A. (1999). Geometrical and Interfacial Non-linearities in the Analysis of Delamination in Composites, International Journal of Solids and Structures, 36: 2189-2216.
5. Camanho, P.P., Davila, C.G. and Moura, M.F. (2003). Numerical Simulation of Mixed-mode Progressive Delamination in Composite Materials, Journal of Composite Materials, 37 (16). 1415-1438.
6. Turon, A., Camanho, P.P., Costa, J. and Davila, C.G. (2006). A Damage Model for the Simulation of Delamination in Advanced Composites Under Variable-mode Loading, Mechanics of Materials, 38: 1072-1089.
7. de Borst R. (2000). Theoretical and Computational Issues in Localisation and Failure, European Congress on Computational Methods in Applied Sciences and Engineering, pp. 1-15. ECCOMAS, Barcelona.
8. Jansson, N.E. and Larsson, R. (2001). A Damage Model for Simulation of Mixed-mode Delamination Growth, Composite Structures, 53: 409-417.
9. Li, X., Hallett, S.R. and Wisnom, M.R. (2008). Predicting the Effect of Through-thickness Compressive Stress on Delamination using Interface Elements, Composites Part A: Applied Science and Manufacturing, 39 (2). 218-230.
10. Soden, P.D., Hinton, M.J. and Kaddour, A.S. (1998). A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Composites Science and Technology, 58: 1225-1254.
11. Hashin, Z. (1980). Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, 47: 329-334.
12. Puck, A. and Schürmann, H. (1998). Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Composites Science and Technology, 58: 1045-1067.
13. Liu, K.S. and Tsai, S.W. (1998). A Progressive Quadratic Failure Criterion for a Laminate, Composites Science and Technology, 58: 1023-1032.
14. Davila, C.G., Camanho, P.P. and Rose, C.A. (2005). Failure Criteria for FRP Laminates, Journal of Composite Materials, 39: 323-345.
15. Pinho, S.T., Davila, C.G., Camanho, P.P., Ianucci, L. and Robinson, P. (2004). Failure Models and Criteria for FRP Under In-plane or Three-dimensional Stress States Including Shear Nonlinearity, NASA/TM-2003-213530.
16. Talreja, R. (1985). Transverse Cracking and Stiffness Reduction in Composite Laminates, Journal of Composite Materials, 19: 355-375.
17. Laws, N., Dvorak, G.J. and Hejazi, M. (1983). Stiffness Changes in Unidirectional Composites Caused by Crack Systems, Mechanics of Materials, 2: 123-137.
18. Hashin, Z. (1986). Analysis of Stiffness Reduction of Cracked Cross-ply Laminates, Engineering Fracture Mechanics, 25 (5 / 6). 771-778.
19. Mayugo, J.A., Camanho, P.P., Maimi P. and Davila, C.G. (2006). A Micromechanics-based Damage Model for (±/90n)s Laminates, NASA/TM-2006-214285.
20. Nuismer, R.J. and Tan, S.C. (1988). Constitutive Relations of a Cracked Composite Lamina, Journal of Composite Materials, 22: 306-321.
21. McCartney, L.N. (2005). Energy-based Prediction of Progressive Ply Cracking and Strength of General Symmetric Laminates Using an Homogenisation Method, Composites-Part A, 36: 119-128.
22. Allen, D.H., Harris, C.E. and Groves, S.E. (1987). A Thermomechanical Constitutive Theory for Elastic Composites with Distributed Damage - I. Theoretical Development, International Journal of Solids and Structures, 23 (9). 1301-1318.
23. Barbero, E.J. and De Vivo, L. (2001). A Constitutive Model for Elastic Damage on Fiber-reinforced PMC Laminae, Journal of Damage Mechanics, 10 (1). 73-93.
24. Camanho, P.P., Maimi P. and Davila, C.G. (2007). Prediction of Size Effects in Notched Laminates Using Continuum Damage Mechanics, Composites Science and Technology, 67: 2715-2727.
25. Ladeveze, P., Allix, O., Deu, J.F. and Lévêque, D. (2000). A Mesomodel for Localisation and Damage Computation in Laminates, Computer Methods in Applied Mechanics and Engineering, 183: 105-122.
26. Maimi P., Camanho, P.P., Mayugo, J.A. and Davila, C.G. (2007). A Continuum Damage Model for Composite Laminates: part I - Constitutive Model, Mechanics of Materials, 39 (10). 897-908.
27. Maimi P., Camanho, P.P., Mayugo, J.A. and Davila, C.G. (2007). A Continuum Damage Model for Composite Laminates: part II - Computational Implementation and Validation, Mechanics of Materials, 39 (10). 909-919.
28. D̃vila, C.G., Rose, C.A. and Song, K. (2008). Determination of Traction-displacement Laws for Representing R-curve Toughening Effects, In: Proceedings of the ABAQUS User's Conference, Newport, RI, 19-22 May.
29. Matzenmiller, A., Lubliner, J. and Taylor, R.L. (1995). A Constitutive Model for Anisotropic Damage in Fiber-composites, Mechanics of Materials, 20: 125-152.
30. William, K.V., Vaziri, R. and Poursartip, A. (2003). A Physically Based Continuum Damage Mechanics Model for thin Laminated Composite Structures, Int. J. Solids and Structures, 40: 2267-2300.
31. Goyal, V.K., Jaunky, N., Johnson, E.R. and Ambur, D.R. (2004). Intralaminar and Interlaminar Progressive Failure Analyses of Composite Panels with Circular Cutouts, Composite Structures, 64 (1). 91-105.
32. Daudeville, L., Allix, O. and Ladevãze, P. (1995). Delamination Analysis by Damage Mechanics: Some Applications, Composites Engineering 5 (1). 17-24.
33. Ladevãze, P. (1995). A Damage Computational Approach for Composites: Basic Aspects and Micromechanical Relations, Computational Mechanics, 17: 142-150.
34. Green, B.G., Wisnom, M.R. and Hallet, S.R. (2007). An Experimental Investigation into the Tensile Strength Scaling of Notched Composites, Composites-Part A, 38: 867-878.
35. Hallett, S.R., Jian, W.G., Khan, B. and Wisnom, M.R. (2008). Modelling the Interaction Between Matrix Cracks and Delamination Damage in Scaled Quasi-isotropic Specimens, Composites Science and Technology, 68: 89-90.
36. Chaboche, J.-L. and Maire, J.F. (2002). A New Micromechanics Based CDM Model and its Application to CMC's, Aerospace Science and Technology, 6: 131-145.
37. Jir̃sek, M. and Zimmermann, T. (1998). Rotating Crack Model with Transition to Scalar Damage, Journal of Engineering Mechanics, 124 (3). 277-284.
38. Carol, I. and Willam, K. (1996). Spurious Dissipation/generation in Stiffness Recovery Models for Elastic Degradation and Damage, Int. J. Solid Structures, 33: 2939-2957.
39. Christensen, R.M. (1997). Stress Based Yield/failure Criteria for Fiber Composites International Journal of Solids and Structures. 34 (5). 529-543.
40. Simo, J.C. and Ju, J.W. (1987). Strain and Stress-based Continuum Damage Models - I. Formulation, International Journal of Solids and Structures, 23 (23). 821-840.
41. Simo, J.C. and Ju, J.W. (1987). Strain and Stress-based Continuum Damage Models - II. Computational Aspects. International Journal of Solids and Structures, 23 (23). 841-869.
42. Bažant, Z.P. and Oh, B.H. (1983). Crack Band Theory for Fracture of Concrete, Materials and structures, 16: 155-177.
43. Pinho, S.T., Robinson, P. and Iannucci, L. (2006). Fracture Toughness of the Tensile and Compressive Fiber Failure Modes in Laminated Composites, Composites Science and Technology, 66: 2069-2079.
44. Bažant, Z.P. and Planas, J. (1998). Chen, W.F. (ed). Fracture and Size Effect in Concrete and Other Quasibrittle Materials, Purdue University.
45. Cox, B.N. and Marshall, D.B. (1994). Concepts for Bridged Cracks in Fracture and Fatigue, Acta Metallurgica Materialia, 42 (2). 341-363.
46. ABAQUS 6.5 User's Manual (2005). ABAQUS Inc., Pawtucket, RI, USA.
47. Bailey, J.E. and Parvizi, A. (1981). On Fiber Debonding Effects and the Mechanism of Transverse-Ply Failure in Cross-Ply Laminates of Glass/Fiber/Thermoset Composites, J. Mat. Sci., 16: 649-659.
48. Nairn, J.A. (2000). Matrix Microcracking in Composites, Comprehensive Composite Materials 2 (12). 403-432.
49. Varna, J., Joffe, R. and Talreja, R. (2001). Mixed Micromechanics and Continuum Damage Mechanincs Approach to Transverse Cracking in [S, 90n]s Laminates, Mechanics of Composite Materials, 37 (2). 115-126.
50. Joffe, R., Krasnikovs, A. and Varna, J. (2001). COD-based Simulation of Transverse Cracking and Stiffness Reduction in [S, 90n]s Laminates, Composites Science and Technology, 61: 637-656.
51. Varna, J., Joffe, R. and Talreja, R. (2001). A Synergistic Damage Mechanics Analysis of Transverse Cracking in [±, 90n]s Laminates, Composites Science and Technology, 61: 657-665.
52. Mayugo, J.A., Camanho, P.P., Maimi, P. and Davila, C.G. (2006). A Micromechanics-based Damage Model for [±,90n]s Composite Laminates, NASA/TM-2006-214285.
53. Hashin, Z. (1996). Finite Thermoelastic Fracture Criterion with Application to Laminate Cracking Analysis, J. Mech. Phys. Solids., 44 (7). 1129-1145.
54. Nuismer, R.J. and Tan, S.C. (1988). Constitutive Relations of a Cracked Composite Lamina, Journal of Composite Materials, 22: 306-321.
55. McCartney, L.N., Schoeppner, G.A. and Becker, W. (2000). Comparison of Models for Transverse ply Cracks in Composite Laminates, Composites Science and Technology, 60: 2347-2359.
56. O'Brien, T.K. (1985). Analysis of Local Delaminations and Their Influence on Composite Laminate Behavior, Delamination and Debonding of Materials, 285-297.
57. Vořechovskyy, M. (2004). Stochastic Fracture Mechanics and Size Effect. PhD Thesis. Institute of Structural Mechanics, Brno University of Technology, ISBN 80-214-2695-0, Czech Republic.
58. Bažant, Z.P. and Pang, S.-D. (2007). Activation Energy Based Extreme Value Statistics and Size Effect in Brittle and Quasibrittle Fracture, Journal of the Mechanics and Physics of Solids, 55: 91-131.
59. Box G.E.P. and Muller, M.E. (1958). A Note on the Generation of Random Normal Deviates, Annals Math. Stat., 29: 610-611
60. Garrett, K.W. and Bailey, J.E. (1977). Multiple Transverse Fracture in 90o Cross-Ply Laminates of a Glass Fibre-Reinforced Polyester, J. Mat. Sci., 12: 157-168.
61. Garrett, K.W. and Bailey, J.E. (1977). The Effect of Resin Failure Strain on the Tensile Properties of Glass Fiber-Reinforced Cross-Ply Laminates, J. Mat. Sci., 12: 2189-2194.
62. Parvizi, A., Garrett, K.W. and Bailey, J.E. (1978). Constrained Cracking in Glass Fiber-Reinforced Epoxy Cross-Ply Laminates, J. Mat. Sci., 13: 195-201.
63. Bader, M.G., Bailey, J.E., Curtis, P.T. and Parvizi, A. (1979). The Mechanisms of Initiation and Development of Damage in Multi-Axial Fibre-Reinforced Plastics Laminates, Proc. 3rd Int'l Conf. on Mechanical Behavior of Materials 3: 227-239.
64. Bailey, J.E., Curtis, P.T. and Parvizi, A. (1979). On the Transverse Cracking and Longitudinal Splitting Behavior of Glass and Carbon Fibre Epoxy Cross-Ply Laminates and the Effect of Poisson and Thermally Generated Strains, Proc. R. Soc. Lond. A, 366: 599-623.
65. König, M., Krüger, R., Kohler, E., Kurz, M. and Ruckstuhl, T. (1999). Analytical and Numerical Analysis of a Specimen Containing a Delamination Caused by a Ply Cut, Institute for Statics and Dynamics of Aerospace Structures, University of Stuttgart, ISD-Report., 97 (2) Rev. B.
66. Wisnom, M.R. (1992). On the Increase of Fracture Energy with Thickness in Delamination of Unidirectional Glass Fiber-Epoxy with Cut Central Plies, J. Reinforced Plastics and Composites., 11: 897-909.
67. Fink, A., Private Communication, DLR - German Aerospace Center, Institute of Composite Structures and Adaptive Systems, Braunschweig, Germany.