Investigation of failure criteria for a sharp notch

International Journal of Fracture

Volumn 152, Issue 2, 2008, Pages 63-74

  Chen, D H ^a   Ozaki, S ^a  

^a TOKYO UNIVERSITY OF SCIENCE   (Japan)

Author keywords

Failure criterion; Fracture mechanics; Notch; Stress concentration; Stress intensity factor

Indexed keywords

ASPHALT PAVEMENTS; FRACTURE; FRACTURE MECHANICS; FRACTURE TOUGHNESS; RESINS; STRENGTH OF MATERIALS; STRESS CONCENTRATION; STRESS INTENSITY FACTORS;

ACRYLIC RESINS; ENERGY RELEASES; FAILURE CRITERION; FAILURE CRITERIONS; INCLINED ANGLES; NOTCH; NOTCH CONFIGURATIONS; NOTCH DEPTHS; NOTCH TIPS; OPENING ANGLES; SHARP NOTCHES; SINGULAR STRESS FIELDS; STATIC STRENGTHS; STRESS FIELDS; STRESS INTENSITIES; STRESS INTENSITY FACTOR; SYMMETRIC FIELDS; TWO PARAMETERS; VIRTUAL CRACKS;

STRESSES;

EID: 57049133447     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-008-9272-9     Document Type: Article

References (29)

1. Chen DH (1995) Stress intensity factors for V-notched strip under tension or in-plane bending. Int J Fract 70: 81-97
2. Chen DH, Nisitani H (1997) Body force method. Int J Fract 86: 161-189
3. Chen DH, Noda NA, Takase Y, Morotomi T (1996) Evaluation of static strength by the application of stress intensity of angular corner. Trans JSME 62(598): 1445-1449 (in Japanese)
4. Dunn ML, Suiwito W, Cunningham SJ (1997) Fracture initiation at sharp notches under mode I, mode II, and mild mixed mode loading. Int J Fract 84: 367-381
5. Erdogan F, Sih GC (1963) On the crack extension in plates under plane loading and transverse shear. Trans ASME J Basic Eng 85: 519-527
6. Gomez FJ, Elices M (2003) A fracture criterion for sharp V-notched samples. Int J Fract 123: 163-175
7. Gomez FJ, Elices M (2004) A fracture criterion for blunted V-notched samples. Int J Fract 127: 239-264
8. Gomez FJ, Guinea GV, Elices M (2006) Failure criteria for linear elastic materials with U-notches. Int J Fract 141: 99-113
9. Grenestedt JL, Hallstrom S, Kuttenkeuler J (1996) On cracks emanating from wedges in expanded PVC foam. Eng Fract Mech 54: 445-456
10. Hallstrom S, Grenestedt JL (1997) Mixed mode fracture of cracks and wedge shaped notches in expanded PVC foam. Int J Fract 88: 343-358
11. Hattori T, Sakata S, Hatsuda T, Murakami G (1988) A stress singularity parameters approach for evaluating adhesive strength. Trans JSME 54(499): 597-603 (in Japanese)
12. Hussain MA, Pu SL, Underwood J (1974) Strain energy release rate for a crack under combined Mode-I and -II, vol 560. ASTM STP, Philadelphia, pp 2-28
13. Lazzarin P, Tovo R (1996) A unified approach to the evaluation of linear elastic stress fields in the neighbourhood of crack and notches. Int J Fract 78: 3-19
14. Leblond JB, Mouro P (1999) Crack propagation from a preexisting flaw at a notch root.Endommagement, fatigue, rupture/Damage, fatigue, rupture. C R Acad Sci Paris t 327;Sbrie II 6: 581-587
15. Leguillon D (2002) Strength or toughness? A criterion for crack onset at a notch. Eur J Mech A: Solids 21: 61-72
16. Leguillon D, Quesada A, Putot C, Martin E (2007) Prediction of crack initiation at blunt notches and cavities - size effects. Eng Fract Mech 74: 2420-2436
17. Nisitani N, Chen DH, Isida M (1984) An approximate method for calculating KI and KII of various edge cracks emanating from the apex of an elliptic hole. Trans JSME 50(451): 519-527 (in Japanese)
18. Noda NA, Chen DH, Takase Y, Morotomi T (1998) Evaluation of static strength by the application of mixed mode stress intensity of angular corner. Trans JSME 64(620): 958-963 (in Japanese)
19. Noda NA, Kouyama T, Kinoshita Y (2006) Stress intensity factors of an inclined elliptical crack near a bimaterial interface. Eng Fract Mech 73: 1292-1320
20. Nuismer RJ (1975) An energy release rate criterion for mixed mode fracture. Int J Fract 11: 245-250
21. Palaniswamy K, Knauss EG (1972) Propagation of a crack under general in-plane tension. Int J Fract 8: 114-117
22. Pook LP (2000) Linear elastic fracture mechanics for engineers. WIT Press, Boston
23. Severyn A (1994) Brittle fracture criterion for structures with sharp notches. Eng Fract Mech 47: 673-681
24. Severyn A, Poskrobko S, Mroz Z (1997) Brittle fracture in plane elements with sharp notches under mixed-mode loading. J Eng Mech 123: 535-543
25. Seweryn A, Lukaszewicz A (2002) Verification of brittle fracture criteria for elements with V-shaped notches. Eng Fract Mech 69: 1487-1510
26. Wang TC (1978) Fracture criteria for combined mode cracks. Sci Sin 21: 457-474
27. Williams ML (1952) Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Trans ASME J Appl Mech 19: 526-528
28. Yosibash Z, Bussiba A, Gilad I (2004) Failure criteria for brittle elastic materials. Int J Fract 125: 307-333
29. Yosibash Z, Priel E, Leguillon D (2006) A failure criteria for brittle elastic materials under mixed-mode loading. Int J Fract 141: 291-312