Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni-Ta bulk glassy alloy via introducing the structural inhomogeneity

Journal of Materials Research

Volumn 23, Issue 11, 2008, Pages 2984-2989

  Park, Jin Man ^a   Kim, Do Hyang ^a   Kim, Ki Buem ^b   Fleury, Eric ^c   Lee, Min Ha ^d   Kim, Won Tae ^e   Eckert, Jürgen ^f,g  

^a Yonsei University   (South Korea)

^b Sejong University   (South Korea)

^c Korea Institute of Science and Technology   (South Korea)

^d Korea Institute of Industrial Technology   (South Korea)

^e Chongju University   (South Korea)

^f IFW DRESDEN   (Germany)

^g DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; ALLOYS; COPPER; COPPER ALLOYS; ELASTICITY; EVOLUTIONARY ALGORITHMS; METALLIC COMPOUNDS; NICKEL ALLOYS; PLASTICITY; PLASTICS; TANTALUM; THICKNESS MEASUREMENT; ZIRCONIUM;

ALLOY CHEMISTRIES; BULK GLASSY ALLOYS; DIFFERENT LENGTH SCALES; GLASSY MATRIXES; HETEROGENEOUS MICROSTRUCTURES; MICROSTRUCTURAL; PREMATURE FAILURES; ROOM TEMPERATURES; SHEAR LOCALIZATIONS; STRUCTURAL INHOMOGENEITY;

TITANIUM ALLOYS;

EID: 56549108824     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/JMR.2008.0357     Document Type: Article

References (35)

1. F. Spaepen: Microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall. 25, 407 (1977).
2. A.L. Greer: Metallic glasses. Science 267, 1947 (1995).
3. W.L. Johnson: Bulk glass-forming metallic alloys. MRS Bull. 24, 42 (1999).
4. A.S. Argon: Plastic deformation in metallic glasses. Acta Metall. 27, 47 (1979).
5. A. Inoue: Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 48, 279 (2000).
6. J.M. Park, J.S. Park, D.H. Kim, J-H. Kim, and E. Fleury: Formation, and mechanical and magnetic properties of bulk ferromagnetic Fe-Nb-B-Y-(Zr, Co) alloys. J. Mater. Res. 21, 1019 (2006).
7. J.F. Löffler: Bulk metallic glasses. Intermetallics 11, 529 (2003).
8. A.R. Yavari, J.J. Lewandowski, and J. Eckert: Mechanical properties of bulk metallic glasses. MRS Bull. 32, 635 (2007).
9. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Mechanical behavior of amorphous alloys. Acta Mater. 55, 4067 (2007).
10. J. Eckert, J. Das, S. Pauly, and C. Duhamel: Mechanical properties of bulk metallic glasses and composites. J. Mater. Res. 22, 285 (2007).
11. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, and L. Schultz: Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys. Nanostruct. Mater. 10, 805 (1998).
12. J.M. Park, J.S. Park, J-H. Kim, and H.J. Chang: Mechanical behaviors of partially devitrified Ti-based bulk metallic glasses. J. Mater. Sci. 40, 4999 (2005).
13. T. Ohkubo, D. Nagahama, T. Mukai, and K. Hono: Stress-strain behaviors of Ti-based bulk metallic glass and their nanostructures. J. Mater. Res. 22, 1406 (2007).
14. Y.C. Kim, J.H. Na, J.M. Park, D.H. Kim, J.K. Lee, and W.T. Kim: Role of nanometer-scale quasicrystals in improving the mechanical behavior of Ti-based bulk metallic glasses. Appl. Phys. Lett. 83, 3093 (2003).
15. L.Q. Xing, Y. Li, K.T. Ramesh, J. Li, and T.C. Hufnagel: Enhanced plastic strain in Zr-based bulk amorphous alloys. Phys. Rev. B: Condens. Matter 64, 180201 (2001).
16. J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, and J. Eckert: Work-hardenable ductile bulk metallic glass. Phys. Rev. Lett. 94, 205501 (2005).
17. A. Inoue, W. Zhang, T. Tsurui, A.R. Yavari, and A.L. Greer: Unusual room-temperature compressive plasticity in nanocrystal-toughened bulk copper-zirconium glass. Philos. Mag. Lett. 85, 221 (2005).
18. J.M. Park, H.J. Chang, K.H. Han, W.T. Kim, and D.H. Kim: Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni bulk metallic glasses. Scr. Mater. 53, 1 (2005).
19. J. Eckert, J. Das, S. Pauly, C. Duhamel, K.B. Kim, S. Yi, and W.H. Wang: Impact of microstructural inhomogeneities on the ductility of bulk metallic glasses. Mater. Trans. 48, 1806 (2007).
20. C. Fan, R.T. Ott, and T.C. Hufnagel: Metallic glass matrix composite with precipitated ductile reinforcement. Appl. Phys. Lett. 81, 1020 (2002).
21. H. Ma, J. Xu, and E. Ma: Mg-based bulk metallic glass composites with plasticity and high strength. Appl. Phys. Lett. 83, 2793 (2003).
22. Y.C. Kim, E. Fleury, J.C. Lee, and D.H. Kim: Origin of the simultaneous improvement of strength and plasticity in Ti-based bulk metallic glass. J. Mater. Res. 20, 2474 (2005).
23. C.C. Hays, C.P. Kim, and W.L. Johnson: Microstructure controlled shear band formation and enhanced plasticity of bulk metallic glasses. Phys. Rev. Lett. 84, 2901 (2000).
24. U. Kühn, J. Eckert, N. Mattern, and L. Schultz: ZrNbCuNiA1 bulk metallic glass matrix composites containing dendrite bcc phase precipitates. Appl. Phys. Lett. 80, 2478 (2002).
25. Y. Zhang, W. Xu, H. Tan, and Y. Li: Microstructure, control and ductility improvement of La-Al-(Cu, Ni) composites by Bridgman solidification. Acta Mater. 53, 2607 (2005).
26. 12.6 bulk metallic glass composites. Acta Mater. 47, 2455 (1999).
27. 12.6 metallic glass matrix particulate composites. J. Mater. Res. 14, 3292 (1999).
28. C.P. Kim, R. Busch, A. Masuhr, H. Choi-Yim, and W.L. Johnson: Processing of carbon-fiber-reinforced ZrTiCuNiBe bulk metallic glass composites. Appl. Phys. Lett. 79, 1456 (2001).
29. J. Eckert, U. Kühn, N. Mattern, G. He, and A. Gebert: Structural bulk metallic glasses with different length-scale of constituent phases. Intermetallics 10, 1183 (2002).
30. M. Kusy, U. Kühn, A. Concustell, A. Gebert, J. Das, J. Eckert, L. Schultz, and M.D. Baro: Fracture surface morphology of compressed bulk metallic glass-matrix-composites and bulk metallic glass. Intermetallics 14, 982 (2006).
31. J.M. Park, Y.C. Kim, W.T. Kim, and D.H. Kim: Ti-based bulk metallic glasses with high specific strength. Mater. Trans. 45, 595 (2004).
32. F.R. De Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Niessen: Cohesion in Metals (North-Holland, Amsterdam, 1989), p. 291.
33. T.B. Massalski and H. Okamoto: Binary Alloy Phase Diagram (ASM International, Materials Park, OH, 1990).
34. JCPDFWIN: Version 2.2, JCPDS, International Center for Diffraction Data: Newton Square, PA, 2001.
35. Z.F. Zhang, G. He, J. Eckert, and L. Schultz: Fracture mechanisms in bulk metallic glassy materials. Phys. Rev. Lett. 91, 045504 (2003).