A review of factors influencing the durability of structural bonded timber joints

International Journal of Adhesion and Adhesives

Volumn 29, Issue 2, 2009, Pages 173-185

  Custódio, João ^a   Broughton, James ^b   Cruz, Helena ^a  

^a NATIONAL LABORATORY FOR CIVIL ENGINEERING   (Portugal)

^b OXFORD BROOKES UNIVERSITY   (United Kingdom)

Author keywords

Durability; Structural bonded joints; Wood

Indexed keywords

ADHESIVE JOINTS; LOGGING (FORESTRY); SUGAR (SUCROSE); TANKERS (SHIPS); TIMBER;

ADHESIVE BONDINGS; LIFE TIMES; RESIDUAL STRENGTHS; SERVICE CONDITIONS; SERVICE ENVIRONMENTS; STRUCTURAL ADHESIVES; STRUCTURAL BONDED JOINTS; STRUCTURAL JOINTS; SUPPORT DESIGNS; TIMBER JOINTS; TIMBER STRUCTURES;

DURABILITY;

EID: 56249143448     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2008.03.002     Document Type: Article

References (80)

1. Wood handbook: wood as an engineering material. General technical report FPL-GTR-113. Madison, WI: United States Department of Agriculture, Forest Sercive, Forest Products Laboratory; 1999.
2. Plecnik J.M., et al. Temperature effects on epoxy adhesives. J Struct Div-ASCE 106 1 (1980) 99-113
3. Aicher S., Wolf M., and Dill-Langer G. Heat flow in a glulam joist with a GISR subjected to variable ambient temperature. Otto Graf J 9 (1998) 185-204
4. Pocius A.V. Adhesion and adhesives technology: an introduction. 2nd ed. (2002), Hanser Gardner Publications
5. Marra A.A. Technology of wood bonding-principles in practice (1992), Van Nostrand Reinhold
6. Pizzi A., and Mittal K.L. Handbook of adhesive technology. 2nd ed. (2003), CRC Press LLC
7. Working Group 1-wood adhesives. In: Dunky M, Pizzi A, Leemput MV (Eds.), Report on the state of the art-wood adhesion and glued products, 1st ed: COST Action E13, 2002.
8. Mays G., and Hutchinson A.R. Adhesives in civil engineering. 1st ed. (1992), Cambridge University Press
9. Kinloch A.J. Durability of structural adhesives. 1st ed. (1983), Applied Science Publishers Ltd.
10. Gledhill R.A., and Shaw S.J. Durability of adhesive-bonded joints employing organosilane coupling agents. Int J Adhes Adhes 10 3 (1990) 192-198
11. Hartshom S.R. Structural adhesives. Chemistry and technology (1986), Plenum Press, New York
12. Wheeler A.S., and Hutchinson A.R. Resin repairs to timber structures. Int J Adhes Adhes 18 1 (1998) 1-13
13. Broughton J.G., and Hutchinson A.R. Effect of timber moisture content on bonded-in rods. Construct Build Mater J 15 (2001) 17-25
14. Surleau J. Durée de vie des assemblages par goujons collés sous sollicitations mécaniques et hygrothermiques. Thése présentée à l'Université Bordeaux I'École Doctorale de Sciences Physiques et de L'Ingénieur, 2004.
15. Back E.L. Oxidative activation of wood surfaces for glue bonding. For Prod J 41 2 (1991) 30-36
16. Broughton J.G., and Hutchinson A.R. Pull-out behaviour of steel rods bonded into timber. RILEM-Mater Struct/Matériaux et Constructions 34 236 (2001) 100-109
17. Broughton J.G., and Hutchinson A.R. Adhesive systems for structural connections in timber. Int J Adhes Adhes 21 3 (2001) 177-186
18. Avent R.R., and Issa C.A. Effect of fire on epoxy-repaired timber. J Struct Eng-ASCE 110 12 (1984) 2858-2875
19. Leafblad JL. The weathering process: understanding the science when developing a conservation approach. In: International conference on conservation of historic wooden structures. Florence, Italy: Michael Shamansky, Bookseller Inc.; 2005.
20. Plecnik J.M., et al. Behaviour of epoxy repaired beams under fire. J Struct Eng-ASCE 112 4 (1986) 906-922
21. Kelsey R.G., and Biswas M. Thermomechanical properties of epoxy mortars. J Mater Civil Eng-ASCE 5 2 (1993) 187-197
22. Winandy JE, Wolde AT, Folk RH. Temperature histories of plywood roof sheating and roof rafters as used in North American ligth-framed construction. In: 7th world conference on timber engineering, WCTE-timber construction in the new millennium, vol. 3, Shah Alam, Malaysia, 2002, p. 114-21.
23. Kemmsies M. Comparison of bond lines in glulam beams adhered with a PRF and one component PUR after fire exposure. RILEM-Symp Timber Eng (1999) 399-408
24. McMurray M.K., and Amagi S. The effect of time and temperature on flexural creep and fatigue strength of a silica particle filled epoxy resin. J Mater Sci 34 (1999) 5927-5936
25. Aicher S., Kalka D., and Scherer R. Transient temperature evolution in glulam with hidden and non-hidden GISR. Otto Graf J 13 (2002) 199-214
26. Frangi A., and Fontana M. Shear behaviour of bond lines in glued laminated timber beams at high temperatures. Wood Sci Technol 38 (2004) 119-126
27. Cruz H, Custódio JEP, Machado JS. Efeito da temperatura no desempenho de colas epoxídicas usadas em reforço estrutural (Temperature effects on the performance of epoxy adhesives used in structural reinforcements). In: 2nd construction national congress on re-think construction-Construção 2004, Porto, Portugal, 2004.
28. Cruz H., Custódio J.E.P., and Machado J.S. A temperatura de serviço elevada e o recobrimento no desempenho de colas epoxídicas usadas em reforço estrutural (High service temperature and the timber embedment effects on the performance of epoxy structural adhesives). Int J Construlink 3 10 (2005) 1-8
29. Cruz H, Custódio JEP. Thermal performance of epoxy adhesives in timber structural repair. In: 9th world conference on timber engineering-WCTE 2006, Portland, OR, USA, 2006.
30. Richter K., and Steiger R. Thermal stability of wood-wood and wood-FRP bonding with polyurethane and epoxy adhesives. Adv Eng Mater 7 5 (2005) 419-426
31. Custódio JEP, Cruz H, Broughton JG. Performance and durability of composite repair and reinforcement systems for timber. In: 9th annual conference for young researchers, London, UK, 2007.
32. Adams R.D., and Wake W.C. Structural adhesive joints in engineering (1984), Elsevier Applied Science, London and New York
33. Minford J.D. Treatise on adhesion and adhesives vol. 7 (1991), Marcel Dekker, New York
34. Davis G. The performance of adhesive systems for structural timbers. Int J Adhes Adhes 17 3 (1997) 247-255
35. Hernandéz R.E. Effect of two wood surfacing methods on the gluing properties of sugar maple and white spruce. For Prod J 44 7/8 (1994) 63-66
36. Singh A.P., et al. The effect of planing on the microscopic structure of Pinus radiate wood cells in relation to penetration of PVA glue. Holz als Roh- und Werkstoff 60 (2002) 333-341
37. Rabiej R.J., Ramrattan S.N., and Droll W.J. Glueline shear strength of laser cut wood. For Prod J 43 2 (1997) 45-54
38. Custódio JEP, Cruz H, Broughton JG. Tratamentos de superfície de madeira para melhoramento da adesão (Timber surface treatments to improve adhesion in structural timber joints). In: National encounter about quality and innovation in construction-QIC2006, Lisboa, Portugal, 2006.
39. Murmanis L., and River B.H. Microscopy of abrasive-planed and knife-planed surfaces in wood-adhesive bonds. Wood Fiber Sci 15 2 (1983) 102-115
40. Šernek M., Kamke F.E., and Glasser W.G. Comparative analysis of inactivated wood surface. Holzforschung 58 (2004) 22-31
41. Nussbaum R.M. Natural surface inactivation of Scots pine and Norway spruce evaluated by contact angle measurements. Holz als Roh- und Werkstoff 57 (1999) 419-424
42. Nussbaum R.M. The critical time limit to avoid natural inactivation of spruce surfaces intended for painting or gluing. Holz als Roh- und Werkstoff 53 (1995) 384
43. Nussbaum R.M. Oxidative activation of wood surfaces by flame treatment. Wood Sci Technol 27 3 (1993) 183-193
44. Roffael E., and Rauch W. Extractives of oak and their influence on the gluing with alkaline phenolic-formaldehyde-resins. Holz als Roh- und Werkstoff 32 (1974) 182-187
45. Belfas J., and Grooves K.W. Bonding surface-modified Karri and Jarrah with resorcinol formaldehyde. Holz als Roh- und Werkstoff 51 (1993) 253-259
46. Balfas J. Surface activation with Lithium and Sodium Hydroxides on regrowth Karri and Jarrah. J Tropical For Sci 6 3 (1994) 257-268
47. Technical Information-Timber Species Database. Timber Research and Development Association (TRADA), 2007.
48. Miroy F., Eymard P., and Pizzi A. Wood hardening by methoxymethyl melamine. Holz als Roh- und Werkstoff 53 4 (1995) 276
49. Dimri M.P., and Shukla K.S. Effect of preservative treatment of veneers on the glue bond in treated plywood. J Timber Dev Assoc India 39 2 (1993) 18-22
50. Manbeck H.B., and Shaffer K.R. Creosote treatment effect on hardwood glulam beam properties. Wood Fiber Sci 27 3 (1995) 239-249
51. Sellers T., and Miller G.D. Evaluation of three adhesive systems for CCA-treated lumber. For Prod J 47 10 (1997) 73-76
52. Vick C.B., and Groot R.C. Compatibility of non-acidic waterborne preservatives with phenol-formaldehyde adhesive. For Prod J 40 2 (1990) 16-22
53. Vick C.B., and Kuster T.A. Mechanical interlocking of adhesive bonds to CCA-treated Southern Pine. SEM study. Wood Fiber Sci 24 1 (1992) 36-46
54. Vick C.B., et al. Structural bonding of acetylated Scandinavian softwoods for exterior lumber laminates. Int J Adhes Adhes 13 3 (1993) 139-149
55. Vick C.B., and Christiansen A.W. Cure of phenol-formaldehyde adhesive in the presence of CCA-treated wood by differential scanning caloriymetry. Wood Fiber Sci 25 1 (1993) 77-89
56. Vick C.B. Coupling agent improves durability of PRF bonds to CCA treated southern pine. For Prod J 45 3 (1995) 78-84
57. Vick C.B. Enhanced adhesion of melanine-urea and melanine adhesives to CCA-treated southern pine lumber. For Prod J 47 7/8 (1997) 83-87
58. Vick C.B., Christiansen A.W., and Okkonen E.A. Reactivity of hydroxymethylated resorcinol coupling agent as it affects durability of epoxy bonds to Douglas-Fir. Wood Fiber Sci 30 3 (1998) 312-322
59. Kilmer W.R., and Blankenhorn P.R. Laminating creosote-treated hardwoods. Wood Fiber Sci 30 2 (1998) 175-184
60. Tascioglu C., Goodell B., and Lopez-Anido R. Bond durability characterization of preservative treated wood and E-glass/phenolic composite interfaces. Compos Sci Technol J 63 (2003) 979-991
61. Herzog B., and Goodell B. The effect of creosote and copper naphthenate preservative systems on the adhesive bondlines of FRP-glulam composite beams. For Prod J 54 10 (2004) 82-90
62. Lisperguer J.H., and Becker P.H. Strength and durability of phenol-resorcinol-formaldehyde bonds to CCA-treated radiata pine wood. For Prod J 55 12 (2005) 113-116
63. Broughton JG, Hutchinson AR. Adhesives systems for timber structures-performance classification & code user selection guidance. State of science part 1-Overview of structural adhesive bonding, PIF 285/02, 2001.
64. Broughton JG, Hutchinson AR. Adhesives systems for timber structures-performance classification & code user selection guidance. State of science part 2-Mechanical testing of adhesive joints, PIF 285/02, 2001.
65. Adams R.D., Comyn J., and Wake W.C. Structural adhesive joints in engineering. 2nd ed. (1997), Springer
66. Adhesives for on-site assembling or restoration of timber structures-Comparative evaluation of the shear strength of adhesive joints and solid wood, CEN/TC 193/SC1/WG11. European Standard Working Document. 2005.
67. Richter K, Cruz H. European Commission COST Action E34-Bonding of wood. Working Group 1 Bonding on site, Core Document, August 2007.
68. Broughton JG, Gardelle V. An analytical method for the determination of end-of-hole profiling in bonded-in rod connections for structural timber. In: Adhesion 5-9th international conference on the science and technology of adhesion and adhesives, 2005.
69. Adhesives for on-site assembling or restoration of timber structures-Evaluation of the shear strength of tubular adhesive joints, CEN/TC 193/SC1/WG11. European Standard Working Document. 2005.
70. Strengthening concrete structures with fibre composite materials-acceptance, inspection and monitoring. Concrete Society, Technical report 57, 2003.
71. Gustafsson P.J. Analysis of generalized Volkersen-joints in terms of linear fracture mechanics (1987), Pluralis, Paris
72. Gustafsson PJ, Serrano E. Predicting the pull-out strength of glued-in rods. In: World conference on timber engineering, WCTE, 2000.
73. Beevers A, Bowditch MR. Tensile butt or lap shear?-the testing question. In: Seminar on the durability of adhesive joints, Institute of Materials, 1995.
74. Bond AE, et al. Finite element analysis of dry and wet butt and lap joints. DTI-MTS Project 3 report no 12, 1996.
75. Fitton M.D., and Broughton J.G. Variable modulus adhesives: an approach to optimised joint performance. Int J Adhes Adhes 25 4 (2005) 329-336
76. Kinloch A.J. Adhesion and adhesives: science and technology. 1st ed. (1987), Chapman & Hall
77. Annon. Evaluation of published durability data. DTI-MTS Project 3 report no 2, January 1994.
78. Taylor AC, Kinloch AJ. The durability performance of structural epoxy adhesives. In: Fifth international conference on structural adhesives in engineering, Bristol, UK, 1998.
79. Weitzenböck JR, Echtermeyer AT, Hayman B. Selection of adhesives and pre-treatments for structural bonding of aluminium in ships. In: Fifth international conference on structural adhesives in engineering, Bristol, UK, 1998.
80. European Standard. Durability of wood and wood-based products. Natural durability of solid wood. Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe. EN 350-2, 1994.