Bond quality at the FRP-wood interface using wood-laminating adhesives

International Journal of Adhesion and Adhesives

Volumn 29, Issue 2, 2009, Pages 101-110

  Raftery, Gary M ^a   Harte, Annette M ^a   Rodd, Peter D ^a  

^a NATIONAL UNIVERSITY OF IRELAND   (Ireland)

Author keywords

Adhesives for wood; Composites; Durability; Wood

Indexed keywords

ABS RESINS; ADHESIVES; CONCRETE BEAMS AND GIRDERS; EPOXY RESINS; FIBER REINFORCED PLASTICS; LAMINATING; MOISTURE; MOISTURE CONTROL; REINFORCED PLASTICS; SHEAR STRENGTH;

ADHESIVES FOR WOOD; BOND QUALITIES; BONDED INTERFACES; COMPOSITES; EPOXY ADHESIVES; FRP MATERIALS; HYGROTHERMAL; LAMINATING ADHESIVES; REINFORCED POLYMERS; SOLID CONTROLS; TEST PROGRAMME; WOOD FAILURES; WOOD SPECIMENS;

WOOD;

ADHESIVES; COMPOSITES; DURABILITY; LAMINATION; MOISTURE; MOISTURE CONTROL; POLYEPOXIDES; SHEAR STRENGTH; WOOD;

EID: 56249142308     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2008.01.006     Document Type: Article

References (48)

1. Gentille C., Svecova D., and Rizkalla S.H. Timber beams strengthened with GFRP bars: development and applications. J Compos Constr 6 1 (2002) 11-20
2. Alam P, Ansell M, Smedley D. Flexural properties of steel and FRP reinforced LVL composites. In: Proceedings of the eighth world conference timber engineering, Lahti, vol. III. 2004. p. 342-6.
3. Svecova D., and Eden R.J. Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars-an experimental investigation. Can J Civil Eng 31 1 (2004) 45-55
4. Dagher HJ, Kimball T, Abdel-Magid B, Shaler SM. Effect of FRP reinforcement on low-grade Eastern Hemlock Glulams. In: Proceedings of the national conference on wood transportation structures, Madison, WI, 1996.
5. Hernandez R, Davalos JF, Sonti SS, Kim Y, Moody RC. Strength and stiffness of reinforced yellow-poplar glued laminated beams, Res. Pap. FPL-RP-554. Madison, WI, 1997.
6. Belperio R, Grad IE. The performance of Glulam beams reinforced with carbon fibre. In: Proceedings of Pacific timber engineering, vol. 2, 1999. p. 99-106.
7. Kenneth J.C., and Lacroix S. Composite reinforcement of timber in bending can. J Civil Eng 27 (2000) 899-906
8. Gilfillan R., Gilbert S., and Patrick G. The improved performance of home-grown timber glulam beams using fibre reinforcement. J Inst Wood Sci 15 6 (2001) 307-317
9. Fiorelli J., and Alves Dias A. Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber. Mater Res 6 2 (2003) 193-202
10. Micelli F., Scialpi V., and La Tegola A. Flexural reinforcement of glulam timber beams and joints with carbon fiber-reinforced polymer rods. J Compos Constr 9 4 (2005) 337-347
11. Martin ZA, Stith JK, Tingley DA. Commercialisation of FRP reinforced glulam beam technology. In: Proceedings of the sixth world conference on timber engineering, Whistler, 2000.
12. Adams R.D., Comyn J., and Wake W.C. Structural adhesive joints in engineering. 2nd ed. (1997), Springer, Berlin
13. Barbero E., Davalos J., and Munipalle U. Bond strength of FRP-wood interface. J Reinforced Plastics Composites 13 9 (1994) 835-854
14. Meylan B.A. Cause of high longitudinal shrinkage in wood. Forest Products J 18 2 (1968) 75-78
15. Mays G.C., and Hutchinson A.R. Adhesives in civil engineering (1992), Cambridge University Press, Cambridge
16. Davis G. The performance of adhesive systems for structural timbers. Int J Adhes Adhes 17 3 (1997) 247-255
17. Wheeler A.S., and Hutchinson A.R. Resin repairs to timber structures. Int J Adhes Adhes 18 1 (1998) 1-13
18. Broughton J.G., and Hutchinson A.R. Adhesive systems for structural connections in timber. Int J Adhes Adhes 21 3 (2001) 177-186
19. Vick CB. Hydroxymethylated resorcinol coupling agent for enhanced adhesion of epoxy and other thermosetting adhesives to wood. In: Proceedings of wood adhesives 1995. Proc. no. 7296. Forest Prod. Society, Madison, WI. p. 47-55.
20. Vick C.B. More durable epoxy bonds to wood with hydroxymethylated resorcinol coupling agent. Adhesives Age 40 8 (1997) 24-29
21. Lyons J.S., and Ahmed M.R. Factors affecting the bond between polymer composites and wood. J Reinforced Plast Compos 24 4 (2005) 405-412
22. Lavisci P., Berti S., Pizzo B., Triboulot P., and Zanuttini R. A shear test for structural adhesives used in the consolidation of old timber. Holz Roh- Werkstoff 59 (2001) 145-152
23. Chui YH, Ni C. Stress distributions in glued wood lap joints subjected to an axial force. In: Proceedings of the fifth world conference on timber engineering. Lausanne, 1998.
24. Shiuh-Chuan H. Stress analysis of adhesively bonded lap joints. Compos Struct 47 (1999) 673-678
25. Objois A., Gilbert Y., and Fargette B. Theoretical and experimental analysis of the scarf joint bonded structure: influence of the adhesive thickness on micromechanical behavior. J Adhes 70 (1999) 13-32
26. Gleich D.M., Van Tooren M.J.L., and Beukers A. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures. J Adhes Sci Tech 15 9 (2001) 1091-1101
27. Adams R.D., and Peppiatt N.A. Stress analysis of adhesively bonded lap joints. J Strain Anal 9 (1974) 185-196
28. Rowlands R.E., Van Deweghe R.P., Laufenberg T.L., and Krueger G.P. Fiber-reinforced wood composites. Wood Fiber Sci 18 1 (1986) 40-57
29. Gardner D.J., Davalos J.F., and Munipalle U.M. Adhesive bonding of pultruted fiber-reinforced plastic to wood. Forest Prod J 44 5 (1994) 62-66
30. ASTM D-1101. Standard method of test for integrity of glue joints in structural laminated wood products for exterior use, 1980.
31. Davalos J.F., Qiao P.Z., and Trimble B.S. Fiber-reinforced composite and wood bonded interfaces: part 1. Durability and shear strength. J Compos Technol Res 22 4 (2000) 224-231
32. Patrick G. The structural performance of FRP reinforced glued laminated beams made from Homegrown Sitka Spruce. Ph.D. thesis, Queen's University Belfast, Northern Ireland, 2004.
33. Alexander J.P., Shaler S.M., and Gardner D.J. Evaluating wood/FRP adhesive bond durability through chemical kinetics. Proceedings of wood adhesives 2000, Lake Tahoe, NV (2000) 58-60
34. Tascioglu C., Goodell B., and Lopez-Anido R. Bond durability characterization of preservative treated wood and e-glass/phenolic composite interfaces. Compos Sci Technol 63 7 (2003) 979-991
35. Raftery G., and Harte A. Evaluation of wood adhesives for a glue-laminated softwood. Proc. Wood Adhesives Forest Products Society, San Diego, CA (2005) 115-122
36. US Forest Products Laboratory. Wood handbook-Wood as an engineering material, Chapter 9. Adhesive bonding of wood materials (1999), Forest Products Society, Madison, WI p. 9-11
37. Gilfillan R., Gilbert S., and Patrick G. The improved performance of home-grown timber glulam using fibre reinforcement. J Inst Wood Sci 15 6 (2001) 307-317
38. ISO 6238, Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by compressive loading, 2001.
39. EN 391, Glued laminated timber, Delamination test of glue lines, 2001.
40. Hutchinson AR. Surface pre-treatment-the key to durability. In: Proceedings of second international conference. on structural faults and repair, University of London, 1987.
41. Jokerst R.W., and Stewart H.A. Knife-versus abrasive-planed wood: quality of adhesive bonds. Wood Fiber Sci 8 2 (1976) 107-113
42. Winfield P.H., Harris A.F., and Hutchinson A.R. The use of flame ionisation technology to improve the wettability and adhesion properties of wood. Int J Adhes Adhes 21 2 (2002) 107-114
43. Stretenovic A., Müller U., Gindl W., and Teischinger A. New shear assay for the simultaneous determination of shear strength and shear modulus in solid wood: finite element modeling and experiemental results. Wood Fiber Sci 36 3 (2004) 302-310
44. Moses D.M., and Prion H.G.L. Anisotropic plasticity and the notched wood shear block. Forest Prod J 52 6 (2002) 43-54
45. Serrano E. A numerical study of the shear-strength-predicting capabilities of test specimens for wood-adhesive bonds. Int J Adhes Adhes 24 1 (2004) 23-35
46. Silva L.F.M., and Adams R.D. Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives. Int J Adhes Adhes 27 3 (2004) 216-226
47. Silva L.F.M., and Adams R.D. Joint strength predictions for adhesive joints to be used over a wide temperature range. Int J Adhes Adhes 27 5 (2007) 362-379
48. Okkonen A.E., and River B.H. Factors affecting the strength of block-shear specimen. Forest Products J 39 1 (1989) 43-50