Effective elastoplastic damage mechanics for fiber reinforced composites with evolutionary partial fiber debonding

International Journal of Damage Mechanics

Volumn 17, Issue 6, 2008, Pages 493-537

  Ju, J W ^a   Ko, Y F ^a   Ruan, H N ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b HOHAI UNIVERSITY   (China)

Author keywords

Damage mechanics; Fiber reinforced composites; Homogenization; Interfacial fiber debonding; Metal matrix composites; Micromechanics; Plasticity; Random microstructure; The equivalent inclusion method

Indexed keywords

ABS RESINS; DEBONDING; ELASTIC MODULI; ELASTOPLASTICITY; FIBER REINFORCED PLASTICS; HOMOGENIZATION METHOD; INCLUSIONS; MECHANICS; METALLIC MATRIX COMPOSITES; PARTICLE SIZE ANALYSIS; PLASTICS; POLYMER MATRIX COMPOSITES; PROBABILITY; STRESSES; THREE DIMENSIONAL; WEIBULL DISTRIBUTION;

DAMAGE MECHANICS; FIBER-REINFORCED COMPOSITES; HOMOGENIZATION; INTERFACIAL FIBER DEBONDING; METAL MATRIX COMPOSITES; RANDOM MICROSTRUCTURE; THE EQUIVALENT INCLUSION METHOD;

FIBERS;

EID: 56049117453     PISSN: 10567895     EISSN: 15307921     Source Type: Journal    
DOI: 10.1177/1056789507081688     Document Type: Article

References (50)

1. Abu Al-Rub, R.K. and Voyiadjis, G.Z. (2006). A Finite Strain Plastic-Damage Model for High Velocity Impact using Combined Viscosity and Gradient Localization Limiters: Part I-Theoretical Formulation, Int. J. Damage Mech., 15 (4): 293-334.
2. Berryman, J.G. (2006). Estimates and Rigorous Bounds on Pore-Fluid Enhanced Shear Modulus in Poroelastic Media with Hard and Soft Anisotropy, Int. J. Damage Mech., 15 (2): 133-167.
3. Berveiller, M. and Zaoui, A. (1979). An Extension of the Self-Consistent Scheme to Plastically Flowing Polycrystals, J. Mech. Phys. Solids, 26: 325-344.
4. Cope, D., Yazdani, S. and Ju, J.W. (2005). A Method to Generate Damage Functions, J. Applied Mech., ASME, 72: 553-557.
5. Eshelby, J.D. (1957). The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc. Lond., A241: 376-396.
6. Gundel, D.B. and Miracle, D.B. (1998). The Influence of Interface Structure and Composition on the Response of Single-Fiber Sic/Ti-6Al-4V Composites to Transverse Tension, Applied Composite Materials, 5: 95-108.
7. Ju, J.W. (1991). A Micromechanical Damage Model for Uniaxially Reinforced Composites Weakened by Interfacial Arc Microcracks, J. Appl. Mech., ASME, 58 (4): 923-930
8. Ju, J.W. and Lee, X. (1991). Micromechanical Damage Models for Brittle Solids. Part I: Tensile Loadings, J. Eng. Mech., ASCE, 117 (7): 1495-1515.
9. Ju, J.W. and Chen, T.M. (1994 a). Micromechanics and Effective Moduli of Elastic Composites Containing Randomly Dispersed Ellipsoidal Inhomogeneities, Acta Mechanica, 103: 103-121.
10. Ju, J.W. and Chen, T.M. (1994 b). Effective Elastic Moduli of Two-Phase Composites Containing Randomly Dispersed Spherical Inhomogeneities, Acta Mechanica, 103: 123-144.
11. Ju, J.W. and Chen, T.M. (1994 c). Micromechanics and Effective Elastoplastic Behavior of Two-phase Metal Matrix Composites, ASME J. Eng. Mater. Tech., 116: 310-318.
12. Ju, J.W. and Lee, H.K. (2000). A Micromechanical Damage Model for Effective Elastoplastic Behavior of Ductile Matrix Composites Considering Evolutionary Complete Particle Debonding, Comput. Methods Appl. Mech. Engrg., 183: 201-222.
13. Ju, J.W. and Lee, H.K. (2001). A Micromechanical Damage Model for Effective Elastoplastic Behavior of Partially Debonded Ductile Matrix Composites, Int. J. Solids & Struct., 38:6307-6332.
14. Ju, J.W. and Sun, L.Z. (2001). Effective Elastoplastic Behavior of Metal Matrix Composites Containing Randomly Located Aligned Spheroidal Inhomogeneities. Part I: Micromechanics-Based Formulation, Int. J. Solids & Struct., 38: 183-201.
15. Ju, J.W. and Tseng, K.H. (1996). Effective Elastoplastic Behavior of Two-Phase Ductile Matrix Composites: A Micromechanical Framework, Int. J. Solids & Struct., 33: 4267-4291.
16. Ju, J.W. and Tseng, K.H. (1997). Effective Elastoplastic Algorithms For Ductile Matrix Composites, J. Eng. Mech., ASCE, 123: 260-266.
17. Ju, J.W. and Zhang, X.D. (1998 a). Micromechanics and Effective Transverse Elastic Moduli of Composites with Randomly Located Aligned Circular Fibers, Int. J. Solids & Struct., 35 (9-10): 941-960.
18. Ju, J.W. and Zhang, Y. (1998 b). A Thermomechanical Model for Airfield Concrete Pavement Under Transient High Temperature Loadings, Int. J. Damage Mechanics, 7 (1): 24-46.
19. Ju, J.W. and Zhang, X. (1998 c). Axisymmetric Thermomechanical Constitutive and Damage Modeling for Airfield Concrete Pavement Under Transient High Temperatures, Mechanics of Materials, 29, 307-323.
20. Ju, J.W. and Zhang, X.D. (2001). Effective Elastoplastic Behavior of Ductile Matrix Composites Containing Randomly Located Aligned Circular Fibers, Int. J. Solids & Struct., 38: 4045-4069.
21. Ju, J.W., Ko, Y.F. and Ruan, H.N. (2006). Effective Elastoplastic Damage Mechanics for Fiber Reinforced Composites with Evolutionary Complete Fiber Debonding, Int. J. Damage Mech., 15 (3): 237-265.
22. Lee, X. and Ju, J.W. (1991). Micromechanical Damage Models for Brittle Solids. Part II: Compressive Loadings, J. Eng. Mech., ASCE, 117 (7): 1516-1537.
23. Lee, H.K. and Ju, J.W. (2007 a). A Three-Dimensional Stress Analysis of a Penny-Shaped Crack Interacting with a Spherical Inclusion, Int. J. Damage Mech., 16 (3): 331-359.
24. Lee, H.K. and Ju, J.W. (2007 b). 3-D Micromechanics and Effective Moduli for Brittle Composites with Randomly Located Interacting Microcracks and Inclusions, Int. J. Damage Mech., 17 (5): 377-418.
25. Lee, J. and Mal, A. (1998). Characterization of Matrix Damage in Metal Matrix Composites under Transverse Loads, Computational Mech., 21: 339-346.
26. Lewandowski, J.J. and Liu, C. (1989). Effects of Matrix Microstructure and Particle Distribution on Fracture of an Aluminum Metal Matrix Composite, Mater. Sci. Eng. Ser. A, A107: 241-255.
27. Liu, H.T. and Sun, L.Z. (2004). Effects of Thermal Residual Stresses on Effective Elastoplastic Behavior of Metal Matrix Composites, Int. J. Solids & Struct., 41: 2189-2203.
28. Liu, H.T., Sun, L.Z. and Ju, J.W. (2004). An Interfacial Debonding Model for Particle-Reinforced Composites, Int. J. Damage Mech., 13: 163-185.
29. Liu, H.T., Sun, L.Z. and Ju, J.W. (2006). Elastoplastic Modeling of Progressive Interfacial Debonding for Particle-Reinforced Metal Matrix Composites, Acta Mechanica, 181: 1-17.
30. Lu, J., Zhang, X. and Mai, Y.-W. (2005). A Preliminary Study on Damage Wave in Elastic-Brittle Materials, Int. J. Damage Mech., 14 (2): 127-147.
31. Marshall, D.B., Morris, W.L., Cox, B.N., Graves, J., Porter, J.R., Kouris, D. and Everett, R.K. (1994). Transverse Strengths and Failure Mechanisms in Ti3Al Matrix Composites, Acta Metal. Mater., 42: 2657-2673.
32. Mura, T. (1987). Micromechanics of Defects in Solids, 2 nd edn, Kluwer Academic, The Netherlands.
33. Naboulsi, S. (2003). Modeling Transversely Loaded Metal-Matrix Composites, J. Comp. Mat., 37: 55-72.
34. Nemat-Nasser, S. and Hori, M. (1993). Micromechanics: Overall Properties of Heterogeneous Materials, Elsevier Science Publisher B. V., Netherlands.
35. Nimmer, R.P., Bankert, R.J., Russell, E.S., Smith, G.A. and Wright, P.K. (1991). Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded Sic/Ti-6-4 Metal Matrix Composites, J. Comp. Tech. and Research, JCTRER, 13: 3-13.
36. Nutt, S.R. and Duva, J.M. (1986). A Failure Mechanism in Al-Sic Composites, Scripta Metall., 20: 1055-1058.
37. Paulino, G.H., Yin, H.M. and Sun, L.Z. (2006). Micromechanics-based Interfacial Debonding Model for Damage of Functionally Graded Materials with Particle Interactions, Int. J. Damage Mech., 15 (3): 267-288.
38. Sun, L.Z. and Ju, J.W. (2001). Effective Elastoplastic Behavior of Metal Matrix Composites Containing Randomly Located Aligned Spheroidal Inhomogeneities. Part II: Applications, Int. J. Solids & Struct., 38: 203-225.
39. Sun, L.Z. and Ju, J.W. (2004). Elastoplastic Modeling of Metal Matrix Composites Containing Randomly Located and Oriented Spheroidal Particles, J. Appl. Mech., ASME, 71: 774-785.
40. Sun, L.Z., Ju, J.W. and Liu, H.T. (2003 a). Elastoplastic Modeling of Metal Matrix Composites with Evolutionary Particle Debonding, Mech. Mat., 35: 559-569.
41. Sun, L.Z., Liu, H.T. and Ju, J.W. (2003 b). Effect of Particle Cracking on Elastoplastic Behavior of Metal Matrix Composites, Int. J. Numer. Meth. Engng, 56: 2183-2198.
42. Tandon, G.P. and Weng, G.J. (1988). A Theory of Particle-reinforced Plasticity, J. Appl. Mech., 55: 126-135.
43. Tohgo, K. and Weng, G.J. (1988). A Theory of Particle-Reinforced Plasticity, J. Appl. Mech., ASME, 55: 126-135.
44. Tohgo, K. and Weng, G.J. (1994). A Progress Damage Mechanics in Particle-Reinforced Metal-Matrix Composites under High Triaxial Tension, J. Eng. Mat. Tech., 116: 414-420.
45. Voyiadjis, G.Z. and Abu Al-Rub, R.K. (2006). A Finite Strain Plastic-Damage Model for High Velocity Impact using Combined Viscosity and Gradient Localization Limiters: Part II-Numerical Aspects and Simulation, Int. J. Damage Mech., 15 (4): 335-373.
46. Weibull, W. (1951). A Statistical Distribution Function of Wide Applicability, J. Appl. Mech., 18: 293-297.
47. Xu, L.R. and Rosakis, A.J. (2005). Impact Damage Visualization of Heterogeneous Two-Layer Materials Subjected to Low-Speed Impact, Int. J. Damage Mech., 14 (3): 215-233.
48. Zhao, Y.H. and Weng, G.J. (1996). Plasticity of a Two-phase Composite with Partially Debonded Inclusions, Int. J. Plasticity, 12: 781-804.
49. Zhao, Y.H. and Weng, G.J. (1997). Transversely Isotropic Moduli of Two Partially Debonded Composites, Int. J. Solids & Struct., 34: 493-507.
50. Zhou, Y., Mahfuz, H. and Jeelani, S. (2005). Numerical Simulation for High Strain Rate Failure Process of Unidirectional Sicf-Al Composites, Int. J. Damage Mech., 14 (4): 321-341.