Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics

Composites Science and Technology

Volumn 68, Issue 15-16, 2008, Pages 3128-3136

  Totry, Essam ^a   González, Carlos ^a,b   LLorca, Javier ^a,b  

^a UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

^b IMDEA MATERIALS INSTITUTE   (Spain)

Author keywords

A. Polymer matrix composites; B. Mechanical properties; B. Modeling; C. Failure criterion

Indexed keywords

ABS RESINS; CARBON FIBER REINFORCED PLASTICS; DATA COMPRESSION; FAILURE ANALYSIS; FIBER OPTICS; FINITE ELEMENT METHOD; FORECASTING; MECHANICAL PROPERTIES; METALLIC MATRIX COMPOSITES; MICROMECHANICS; POLYMER MATRIX COMPOSITES; THREE DIMENSIONAL;

A. POLYMER-MATRIX COMPOSITES; AS4/PEEK; B. MECHANICAL PROPERTIES; B. MODELING; C. FAILURE CRITERION; COMPUTATIONAL MICROMECHANICS; FAILURE LOCUS; FAILURE MECHANISMS; FAILURE MICROMECHANISMS; FAILURE MODELS; FIBER PROPERTIES; FINITE ELEMENT ANALYSIS; INELASTIC BEHAVIORS; INTERFACE DECOHESION; LONGITUDINAL SHEARS; MATRIX SHEARS; MULTIAXIAL LOADINGS; NUMERICAL PREDICTIONS; NUMERICAL SIMULATIONS; REPRESENTATIVE VOLUME ELEMENTS; TRANSVERSE COMPRESSIONS; WEAK INTERFACES;

QUALITY ASSURANCE;

COMPOSITE; COMPRESSION; DEFORMATION; FAILURE ANALYSIS; MATHEMATICAL ANALYSIS; MATHEMATICAL MODEL; POLYETHER ETHER KETONE; SHEAR PROPERTY;

EID: 55849152058     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2008.07.011     Document Type: Article

References (36)

1. Vogler T.J., and Kyriakides S. Inelastic behavior of an AS4/PEEK composite under combined transverse compression and shear. Part I: Experiments. Int J Plasticity 15 (1999) 783-806
2. Zohdi T.I., and Wriggers P. Introduction to computational micromechanics (2005), Springer, Berlin
3. Cailletaud G., Forest S., Jeulin D., Feyel F., Galliet I., Mounoury V., et al. Some elements of microstructural mechanics. Computat Mater Sci 27 (2003) 351-374
4. González C., and LLorca J. Multiscale modeling of fracture in fiber-reinforced composites. Acta Mater 54 (2006) 4171-4181
5. González C., and LLorca J. Numerical simulation of the fracture behavior of Ti/SiCcomposites between 20 °C and 400 °C. Metall Mater Trans A 38 (2007) 169-179
6. Delannay L., Jacques P.J., and Kalindi S.R. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. Int J Plasticity 22 (2006) 1879-1898
7. Youssef S., Maire E., and Gaertner R. Finite element modelling of the actual structure of cellular materials determined by X-ray tomography. Acta Mater 53 (2005) 719-730
8. Moraleda J., Segurado J., and LLorca J. Finite deformation of porous elastomers: acomputational micromechanics approach. Philos Mag 87 (2007) 5607-5627
9. Segurado J., González C., and LLorca J. A numerical investigation of the effect of particle clustering on the mechanical properties of composites. Acta Mater 51 (2003) 2355-2369
10. Segurado J., and LLorca J. Computational micromechanics of composites: the effect of particle spatial distribution. Mech Mater 38 (2006) 873-883
11. Chawla N., Sidhu R.S., and Ganesh V.V. Three-dimensional visualization and microstructure-based modeling of deformation in particle-reinforced composites. Acta Mater 54 (2006) 1541-1548
12. Miravete A., Bielsa J.M., Chiminelli A., Cuartero J., Serrano S., Tolosana N., et al. 3D mesomechanical analysis of three-axial braided composite materials. Compos Sci Technol 66 (2006) 2594-2964
13. Song S., Waas A.M., Shahwan K.W., Xiao X., and Faruque O. Braided textile composites under compressive loads. modeling the response, strength and degradation. Compos Sci Technol 67 (2007) 3059-3070
14. González C., and LLorca J. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: microscopic mechanisms and modeling. Compos Sci Technol 67 (2007) 2795-2806
15. Hinton M.J., Soden P.D., and Kaddour A.S. Failure Criteria in Fiber-reinforced Polymer Composites: The World Wide Failure Exercise (2004), Elsevier, Amsterdam
16. Soden P.D., Hinton M.J., and Kaddour A.S. A comparison of the predictive capabilities of current failure theories for composite laminates. Compos Sci Technol 58 (1998) 1225-1254
17. Kaddour A.S., Hinton M.J., and Soden P.D. A comparison of the predictive capabilities of current failure theories for composite laminates: additional contributions. Compos Sci Technol 58 (1998) 1225-1254
18. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 58 (1998) 1045-1067
19. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 62 (2002) 1633-1662
20. Pinho ST, Dávila CG, Camanho PP, Iannucci L, Robinson L. Failure models and criteria for FRP under in-plane of three-dimensional stress states including shear non-linearity. Report NASA/TM-2005-213530, 2005.
21. Hsu S.Y., Vogler T.J., and Kyriakides S. Inelastic behavior of an AS4/PEEK composite under combined transverse compression and shear. Part II: Modeling. Int J Plasticity 15 (1999) 807-836
22. Totry E., González C., and LLorca J. Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear. Int J Solids Struct 45 (2008) 1663-1675
23. Segurado J., and LLorca J. A numerical approximation to the elastic properties of sphere-reinforced composites. J Mech Phys Solids 50 (2002) 2107-2121
24. Totry E., González C., and LLorca J. Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear. Compos Sci Technol 68 (2008) 829-839
25. Abaqus, Users' Manual, version 6.7, ABAQUS, Inc., 2008.
26. González C., Segurado J., and LLorca J. Numerical simulation of elasto-plastic deformation of composites: evolution of stress microfields and implications for homogenization models. J Mech Phys Solids 52 (2004) 1573-1593
27. Segurado J., and LLorca J. A new three-dimensional interface finite element to simulate fracture in composites. Int J Solids Struct 41 (2004) 2977-2993
28. Abaqus, Theory Manual, HKS, Inc., 1998.
29. Menetrey P., and Willam K.J. Triaxial failure criterion for concrete and its generalization. ACI Struct J 92 (1995) 311-318
30. Quinson R., Perez J., Rink M., and Pavan A. Yield criteria for amorphous glassy polymers. J Mater Sci 32 (1997) 1371-1379
31. Hsu S.Y., Vogler T.J., and Kyriakides S. Compressive strength predictions for fiber composites. J Appl Mech 65 (1998) 7-16
32. Gregory J.R., and Spearing S.M. Nanoindentation of neat and in situ polymers in polymer-matrix composites. Compos Sci Technol 65 (2005) 595-607
33. Segurado J., and LLorca J. A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites. Acta Mater 53 (2005) 4931-4942
34. Zhou X.-F., Wagner H.D., and Nutt S.R. Interfacial properties of polymer composites measured by push-out and fragmentation tests. Composites A 32 (2001) 1543-1551
35. Dávila C., Camanho P.P., and Rose C.A. Failure criteria for FRP laminates. J Compos Mater 39 (2005) 323-345
36. Pinho S.T., Iannucci L., and Robinson P. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre-kinking. Part I: Development. Composites A 37 (2006) 63-73