Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion

International Journal of Solids and Structures

Volumn 46, Issue 2, 2009, Pages 311-321

  Ayatollahi, M R ^a   Aliha, M R M ^a  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

Angled center crack; Cracked Brazilian disc specimen; Mixed mode fracture; Soda lime glass

Indexed keywords

CONCRETES; CRACKS; FORECASTING; FRACTURE; FRACTURE TESTING; GLASS; LIME;

ANGLED CENTER-CRACK; CRACKED BRAZILIAN DISC SPECIMEN; DISC SPECIMENS; GLASS COMPONENTS; GLASS PLATES; MAXIMUM TANGENTIAL STRESS CRITERIONS; MIXED MODE FRACTURE; MIXED MODE FRACTURES; MIXED MODES; SODA LIME GLASS; SODA LIMES; TEST RESULTS; TEST SPECIMENS;

BRITTLE FRACTURE;

EID: 55849109218     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2008.08.035     Document Type: Article

References (37)

1. Abrams M.B., Green D.J., and Jill Glass S. Fracture behavior of engineered stress profile soda lime silicate glass. Journal of Non-Crystalline Solids 321 (2003) 10-19
2. Atkinson C., Smelser R.E., and Sanchez J. Combined mode fracture via the cracked Brazilian disc test. International Journal of Fracture 18 (1982) 279-291
3. Awaji, H., Kato, T., 1998. Griffith criterion for mode II fracture of ceramics. In: Experimental Mechanics. Alison, Balkema, Rotterdam, pp. 1199-1204.
4. Awaji H., and Sato S. Combined mode fracture toughness measurement by the disc test. Journal of Engineering Materials and Technology 100 (1978) 175-182
5. Awaji H., Kato T., Honda S., and Nishikawa T. Criterion for combined mode I-II brittle fracture. Journal of the Ceramic Society of Japan 107 10 (1999) 918-924
6. Ayatollahi M.R., and Aliha M.R.M. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading. Computational Material Science 38 4 (2007) 660-670
7. C) and its parameters: the case of silica-rich glasses. Journal of Non-Crystalline Solids 344 (2004) 44-50
8. Erdogan F., and Sih G.C. On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, Transactions of ASME 85 (1963) 519-525
9. Fett T. Stress intensity factors and T-stress for internally cracked circular disks under various boundary conditions. Engineering Fracture Mechanics 68 (2001) 1119-1136
10. Finnie I., and Saith A. A note on the angled crack problem and the directional stability of cracks. International Journal of Fracture 9 (1973) 484-486
11. Freiman S.W., Gonzalez A.C., and Mecholsky J.J. Mixed-mode fracture in soda-lime glass. Journal of the American Ceramic society 62 3-4 (1979) 206-208
12. Geandier G., Denis S., and Mocellin A. Float glass fracture toughness determination by Hertzian contact: experiments and analysis. Journal of Non-Crystalline Solids 318 (2003) 284-295
13. Glaesemann G.S., Ritter J.E., and Jaku K. Mixed-mode fracture in soda-lime glass using indentation flaws. Journal of the American Ceramic Society 70 9 (1987) 630-636
14. Gong J., Chen Y., and Li C. Statistical analysis of fracture toughness of soda-lime glass determined by indentation. Journal of Non-Crystalline Solids 279 (2001) 219-223
15. He M.Y., Cao H.C., and Evans A.G. Mixed mode fracture: the four-point shear specimen. Acta Metallurgica et Materialia 38 (1990) 839-846
16. Hirano K. Application of eutectic composites to gas turbine system and fundamental fracture properties up to 1700 C. Journal of the European Ceramic Society 25 8 (2005) 1191-1199
17. Hussain, M.A, Pu, S.L, Underwood, J., 1974. Strain energy release rate for a crack under combined mode I and Mode II. In: Fracture Analysis, ASTM STP 560. American Society for Testing and Materials, Philadelphia, pp. 2-28.
18. Ikeda K., and Igaki H. Mixed-mode fracture criterion in soda-lime glass. The Japan Society of Mechanical Engineers 33 1 (1990) 84-88
19. Koike A., Tomozawa M., and Ito S. Sub-critical crack growth rate of soda-lime-silicate glass and less brittle glass as a function of fictive temperature. Journal of Non-Crystalline Solids 353 (2007) 2675-2680
20. Kordisch H., Riedmuller J., and Sommer E. The strain energy density criterion - investigations for its applicability. In: Sih G.C., Czoboly E., and Gillemot F. (Eds). Proceedings of the Symposium of Absorbed Specefic Energy/Strain Energy Density (1984), Martinus Nijhoff, The Hague, Netherlands 33-43
21. Li M., and Sakai M. Mixed-mode fracture of ceramics in asymmetric four-point bending. Journal of the American Ceramic Society 79 10 (1996) 2718-2726
22. Maschio R.D., and Nobile L. A Simplified approach for ceramic fracture toughness evaluation by indentation. Engineering Fracture Mechanics 51 2 (1995) 209-215
23. Panasyuk V.V., Berezhnitskiy L.T., and Kovchik S.Y. Propagation of an arbitrary oriented rectilinear crack during extension of a plate. Pirkladnaya Mekhanika 1 (1965) 48-55
24. 3 and Si3N4 ceramics determined by the surface crack in flexure (SCF) method. Journal of Materials Science 36 (2001) 2335-2342
25. Petit F., Sartieaux A.C., Gonon M., and Cambier F. Fracture toughness and residual stress measurements in tempered glass by Hertzian indentation. Acta Materialia 55 (2007) 2765-2774
26. Ritter J.E., Huseinovic A., Chacravarthy S.S., and Lardner T.J. Subcritical crack growth in soda-lime glass under mixed-mode loading. Journal of the American Ceramic Society 83 8 (2000) 2109-2111
27. Sglavo V.M., Micheletti T., and Di Cuonzo S. Influence of crack geometry and loading mode on fracture and fatigue of soda-lime-silica glass. Physics and Chemistry of Glasses - European Journal of Glass Science and Technology, Part B 44 5 (2003) 337-344
28. Shetty D.K., and Rosenfield A.R. Slow crack growth in glass in combined mode I and mode II loading Scripta Metallurgica et Materialia 25 5 (1991) 997-1002
29. Shetty D.K., Rosenfield A.R., and Duckworth W.H. Mixed mode fracture of ceramics in diametral compression. Journal of the American Ceramic Society 69 6 (1986) 437-443
30. Shetty D.K., Rosenfield A.R., and Duckworth W.H. Mixed-mode fracture in biaxial stress state: application of the diametral-compression (Brazilian disk) test. Engineering Fracture Mechanics 26 6 (1987) 825-840
31. Sih G.C. Strain-energy-density factor applied to mixed mode crack problems. International Journal of Fracture 10 (1974) 305-321
32. Singh D., and Shetty D.K. Fracture toughness of polycrystalline ceramics in combined mode I and mode II loading. Journal of the American Ceramic Society 72 1 (1989) 78-84
33. Smith D.J., Ayatollahi M.R., and Pavier M.J. The role of T-stress in brittle fracture for linear elastic materials under mixed mode loading. Fatigue and Fracture of Engineering Materials and Structures 24 (2001) 137-150
34. Warren P.D. Determining the fracture toughness of brittle materials by Hertzian indentation. Journal of the European Ceramic Society 15 (1995) 201-207
35. Williams M.L. On the stress distribution at the base of a stationary crack. Journal of Applied Mechanics 24 (1957) 109-114
36. Williams J.G., and Ewing P.D. Fracture under complex stress - the angled crack problem. International Journal of Fracture 8 (1972) 441-446
37. Yoda M., Yoshikawa Y., Ono K., and Ide M. Fracture and subcritical crack growth in soda-lime glass under combined modes I and II loading. Journal of the American Ceramic society 78 1 (1995) 161-165