Morphology and mechanical properties of impact modified polypropylene blends

Polymer Engineering and Science

Volumn 48, Issue 11, 2008, Pages 2098-2110

  Tortorella, Nathan ^a   Beatty, Charles L ^a  

^a University of Florida   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DENSITY (SPECIFIC GRAVITY); DYNAMIC MECHANICAL ANALYSIS; ELASTOMERS; ETHYLENE; FREE RADICAL POLYMERIZATION; FREE RADICALS; GLASS TRANSITION; GRAFTING (CHEMICAL); IMPACT STRENGTH; MELT SPINNING; PARTICLE SIZE; PLASTIC PRODUCTS; STYRENE; TEMPERATURE; YIELD STRESS;

BINARY BLENDS; ETHYLENE/OCTENE COPOLYMER; GRAFT YIELDS; ISOTACTIC POLYPROPYLENE; MELT-FLOW INDEX; MODIFIED POLYPROPYLENE; MORPHOLOGY AND MECHANICAL PROPERTIES; PERFORMANCE; POLYPROPYLENE BLENDS; TWIN SCREW EXTRUDERS;

POLYPROPYLENES;

EID: 55749106949     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21089     Document Type: Article

References (82)

1. J. Karger-Kocsis, Polypropylene: An A-Z Reference, Springer-Verlag, New York (1999).
2. J. Scheirs and W. Kaminsky, Metallocene-Based Polyolefins, Vol. 2, Wiley, New York (2000).
3. F.C. Stehling, T. Huff, C.S. Speed, and G. Wissler, J. Appl. Polym. Sci., 26, 2693 (1981).
4. W. Wang, Q. Wu, and B. Qu, Polym. Eng. Sci., 43, 1798 (2003).
5. W.Y. Chiu and S.J. Fang, J. Appl. Polym. Sci., 30, 1473 (1985).
6. N.C. Liu and W.E. Baker, Polymer, 35, 988 (1994).
7. T. Inoue, J. Appl. Polym. Sci., 54, 723 (1994).
8. J.W. Teh and A. Rudin, Polym. Eng. Sci., 32, 1678 (1992).
9. I.S. Miles and S. Rostami, Eds., Multicomponent Polymer ystems, Longman Scientific & Technical, London (1992).
10. I.H. Do, L.K. Yoon, B.K. Kim, and H.M. Jeong, Eur. Polym. J., 32, 1387 (1996).
11. C. Tzoganakis, "Peroxide Degradation of Polypropylene During Reactive Extrusion," Ph.D. Dissertation, McMaster University, Hamilton, Ontario (1988).
12. A.V. Machado, J.A. Covas, and M. Van Duin, Polymer, 42, 3649 (2001).
13. G. Moad, Prog. Polym. Sci., 24, 81 (1999).
14. G.H. Hu, H. Li, L.F. Feng, and L.A. Pessan, J. Appl. Polym. Sci., 88, 1799 (2003).
15. F. Picchioni, J.G.P. Goossens, M. van Duin, and P. Magusin, J. Appl. Polym. Sci., 89, 3279 (2003).
16. X. Zhang and W.E. Baker, J. Appl. Polym. Sci., 67, 427 (1998).
17. K.L. Walton, US Patent 6,548,600 (2003).
18. L.K. Yoon, C.H. Choi, and B.K. Kim, J. Appl. Polym. Sci., 56, 239 (1995).
19. D. Graebling, M. Lambla, and H. Wautier, J. Appl. Polym. Sci., 66, 809 (1997).
20. E. Borsig, A. Fiedlerova, L. Rychla, M. Lazar, M. Ratzsch, and G. Haudel, J. Appl. Polym. Sci., 37, 467 (1989).
21. L. Wild, LA. Hinnenkamp, B.-H. Chang, B.-E., and W.W. Kiang, US Patent 5,344,888 (1994).
22. W.B. Shyu and D. Woodhead, US Patent 4,753,997 (1988).
23. G.H. Hu, J.J. Flat, and M. Lambla, SPE ANTEC, 40, 2775 (1994).
24. H. Tang, "Novel Polyolefin Elastomer-Based Blends and Their Applications," Ph.D. Dissertation, University of Florida, Gainesville, Florida (2000).
25. Y. Li, X.M. Xie, and B.H. Guo, Polymer, 42, 3419 (2001).
26. K.N. Ludwig and R.B. Moore, SPE ANTEC, 45, 1844 (1999).
27. K.E. Russell, Prog. Polym. Sci., 27, 1007 (2002).
28. F.M. Lewis, C. Walling, W. Cummings, E.R. Briggs, and F.R. Mayo, J. Am. Chem. Soc., 70, 1529 (1948).
29. P.J. Flory, Principles of Polymer Chemistry, Cornell University Press, New York (1953).
30. L. Yao, "The Functional Monomers Grafted Polyolefins and Their Applications in the Compatibilization of Polymer Blends," Ph.D. Dissertation, University of Florida (1996).
31. E.J. Dietz and N.A. Peppas, Polymer, 38, 3767 (1997).
32. A.V. Machado, M. van Duin, and J.A. Covas, J. Polym. Sci., Part A: Polym. Chem., 38, 3919 (2000).
33. C. He, S. Costeux, P. Wood-Adams, and J.M. Dealy, Polymer, 44, 7181 (2003).
34. C. Tzoganakis, J. Vlachopoulos, and A.E. Hamielec, Polym. Eng. Sci., 28, 170 (1988).
35. V. Flaris and W.E. Baker, SPE ANTEC, 41, 3164 (1995).
36. B. Wong, "Free Radical Melt Grafting of Glycidyl. Metheacrylate and Styrene onto Polypropylene: A Study of the Rheological and Chemical Properties," Master's Thesis, Queen's University, Kingston, Ontario (1995).
37. H. Cartier and G.H. Hu, Polym. Eng. Sci., 38, 177 (1999).
38. G. Doney and K. Salsman, US Patent 6,855,771 (2005).
39. J.J. Morad, SPE ANTEC, 41, 783 (1995).
40. H. C. Lau, S.N. Bhattacharya, and G.J. Field, Polym. Eng. Sci., 38, 1915 (1998).
41. M. Ratzsch, J.M.S. Pure Appl. Chem, A36, 1759 (1999).
42. A. Dharia and R. Folland, SPE ANTEC, 51, 2156 (2005).
43. C. Jordan, J.Y. Cavaille, and J. Perez, J. Polym. Sci., Part B: Polym. Phys., 27, 2361 (1989).
44. H.-W. Xiao, S.-Q. Huang, T. Jiang, and S.-Y. Cheng, J. Appl. Polym. Sci., 83, 315 (2002).
45. L.H.U. Andersson, B. Gustafsson, and T. Hjertberg, Polymer, 45, 2577 (2004).
46. D. Dudic, D. Kostoski, V. Djokovic, and Z. Stojanovic, Polym. Degrad. Stab., 67, 233 (2000).
47. H.T. Akshay, S.K. Trivedi, and L. Sunggyu, Polym. Eng. Sci., 41, 1923 (2001).
48. A.P. Plochocki, S.S. Dagli, and R.D. Andrews, Polym. Eng. Sci., 30, 741 (1990).
49. C.J. Chou, K. Vijayan, D. Kirby, A. Hiltner, and E. Baer, J. Mater. Sci., 23, 2521 (1988).
50. B.Z. Jang, D.R. Uhlmann, and J.B. Vander Sande, J. Appl. Polym. Sci., 30, 2485 (1985).
51. S. Jose, A.S. Aprem, B. Francis, M.C. Chandy, P. Werner, V. Alstaedt, and S. Thomas, Eur. Polym. J., 40, 2105 (2004).
52. K. Premphet and W. Paecharoenchai, J. Appl. Polym. Sci., 82, 2140 (2001).
53. Y. Liu, X. Zhang, J. Gao, F. Huang, B. Tan, G. Wei, and J. Qiao, Polymer, 45, 275 (2004).
54. U. Sundararaj, "Morphology Development During Polymer Blending," Ph.D. Dissertation, University of Minnesota (1994).
55. C.E. Scott and C.W. Macosko, Polymer, 36, 461 (1995).
56. S. Wu, J. Appl. Polym. Sci., 35, 549 (1988).
57. S. Wu, J. Polym. Sci., Part B: Polym. Phys., 21, 699 (1983).
58. V. Petraccone, I.C. Sanchez, and R.S. Stein, J. Polym. Sci., Part B: Polym. Phys., 13, 1991 (1975).
59. A. van der Wal and R.J. Gaymans, Polymer, 40, 6045 (1999).
60. A. Galeski, Prog. Polym. Sci., 28, 1643 (2001).
61. J. Karger-Kocsis, A. Kallo, A. Szafner, G. Bodor, and Z. Senyei, Polymer, 20, 37 (1979).
62. Z. Bartczak, A. Galeski, and M. Pracella, Polymer, 27, 537 (1986).
63. X.Q. Zhou and J.N. Hay, Polymer, 34, 4710 (1993).
64. T. Inoue and T. Suzuki, J. Appl. Polym. Sci., 59, 1443 (1996).
65. M. Gahleitner, J. Wolfschwenger, C. Bachner, K. Bernreitner, and W. Neibl, J. Appl. Polym. Sci., 61, 649 (1996).
66. N. Tortorella and C.L. Beatty, Polym. Eng. Sci., 48, 1476 (2008).
67. J.A.W. van Dommelen, W.A.M. Brekelmans, and F.P.T. Baaijens, Mech. Mater., 35, 845 (2003).
68. Z. Bartczak, J. Macromol. Sci, B, 41, 1205 (2002).
69. S. Hillmansen, R.N. Haward, Polymer, 42, 9301 (2001).
70. J. Karger-Kocsis, Polym, Eng. Sci., 36, 203 (1996).
71. P. Jacoby, B.H. Bersted, W.J. Kissel, and C.E. Smith, J. Polym. Sci., Part B: Polym. Phys. 24, 461 (1986).
72. J. Varga, J. Macromol, Sci, B, 41, 1121 (2002).
73. R. Seguela and F. Rietsch, Polymer, 27, 532 (1986).
74. W.E. Baker, C.E. Scott, and G.-H. Hu, Reactive Polymer Blending, Hanser, Munich (2001); Chapters 6 and 7.
75. S. Bensason, V. Stepanov, S. Chum, A. Hiltner, and E. Baer, Macromolecules, 30, 2436 (1997).
76. W. Zhou and S. Zhu, Ind. Eng. Chem. Res., 36, 1130 (1997).
77. S. Camara, B.C. Gilbert, R.J. Meier, M. van Duin, and A.C. Whitwood, Org. Biomol. Chem., 1, 1181 (2003).
78. E. Niki and Y. Kamiya, J. Org. Chem., 38, 1403 (1973).
79. L.F. Chen, B. Wong, and W.E. Baker, Polym. Eng. Sci., 36, 1594 (1996).
80. S. Filipe, M.T. Cidade, M. Wilhelm, and J.M. Maia, Polymer, 45, 2367 (2004).
81. J. Cha and J.L. White, Polym. Eng. Sci., 41, 1238 (2001).
82. J. Yang, Z. Yao, D. Shi, H. Huang, Y. Wang, and J. Yin, J. Appl. Polym. Sci., 79, 535 (2001).