Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation

Composites Science and Technology

Volumn 68, Issue 15-16, 2008, Pages 3322-3329

  Lin, Song ^a   Cai, Qing ^a   Ji, Jianying ^a   Sui, Gang ^a   Yu, Yunhua ^a   Yang, Xiaoping ^a   Ma, Qi ^b   Wei, Yan ^b   Deng, Xuliang ^b  

^a BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY   (China)

^b PEKING UNIVERSITY SCHOOL AND HOSPITAL OF STOMATOLOGY   (China)

Author keywords

A Fiber; A Nano composite; B Interface

Indexed keywords

ABS RESINS; CARBON FIBER REINFORCED PLASTICS; CONDUCTIVE PLASTICS; DENTAL MATERIALS; DISSOLUTION; GAS METAL ARC WELDING; LOCAL AREA NETWORKS; MECHANICAL PROPERTIES; MICROSCOPIC EXAMINATION; NANOFIBERS; PHOTOPOLYMERIZATION; POLYMER BLENDS; PROPANE; RESINS; SHELLS (STRUCTURES);

A FIBER; A NANO-COMPOSITE; B INTERFACE; BIS-GMA; CORE-SHELL STRUCTURES; DENTAL RESINS; DYNAMIC MECHANICAL PROPERTIES; ELECTROSPUN NANOFIBERS; FLEXURAL PROPERTIES; IN-SITU; INTERFACE FORMATIONS; NANOFIBER FABRICS; SHELL STRUCTURES; TOUGHENED COMPOSITES; TRANSMISSION ELECTRONS;

NANOSTRUCTURED MATERIALS;

ELECTROSPINNING; FIBER REINFORCED COMPOSITE; MECHANICAL PROPERTY; NANOFIBER; POLYMERIZATION; STRUCTURAL ANALYSIS; TOUGHNESS;

EID: 55649095924     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2008.08.033     Document Type: Article

References (37)

1. Ruddle D.E., Maloney M.M., and Thompson I.Y. Effect of novel filler particles on the mechanical and wear properties of dental composites. Dent Mater 18 1 (2002) 72-80
2. Xu H.H.K., Schumacher G.E., Eichmiller F.C., Peterson R.C., Antonucci J.M., and Mueller H.J. Continuous-fiber preform reinforcement of dental resin composite restorations. Dent Mater 19 6 (2003) 523-530
3. Jandt K.D., Al-Jasser A.M., Al-Aten K., Vowles R.W., and Allen G.C. Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites. Dent Mater 18 6 (2002) 429-435
4. Xu H.H.K. Dental composite resins containing silica-fused ceramic single-crystalline whiskers with various filler levels. J Dent Res 78 (1999) 1304-1311
5. Ferracane J.L. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater 1 1 (1985) 11-14
6. Li Y., Swartz M.L., Phillips R.W., Moore B.K., and Roberts T.A. Effect of filler content and size on properties of composites. J Dent Res 64 12 (1985) 1396-1401
7. Xu H.H.K., Martin T.A., Antonucci J.M., and Eichmiller F.C. Ceramic whisker reinforcement of dental composite resins. J Dent Res 78 2 (1999) 706-712
8. Schaefer D.W., and Justice R.S. How nano are nanocomposites?. Macromolecules 40 24 (2007) 8501-8517
9. Zhao F., and Takeda N. Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part I: experimental results. Composites A 31 (2000) 1203-1214
10. Kessler A., and Bleddzki A. Correlation between interphase-relevant tests and the impact-damage resistance of glass/epoxy laminates with different fibre surface treatments. Compos Sci Technol 60 1 (2000) 125-130
11. Debnath S., Ranadea R., and Wunder S.L. Interface effects on mechanical properties of particle-reinforced composites. Dent Mater 20 7 (2004) 677-686
12. Gao J., Zhao B., Itkis M.E., and Bekyarova E. Chemical engineering of the single-walled carbon nanotube-nylon 6 interface. J. Am. Chem. Soc 128 23 (2006) 7492-7496
13. Yoshida Y., Shirai K., Nakayama Y., Itoh M., and Okazaki M. Improved filler-matrix coupling in resin composites. J Dent Res 81 (2002) 270-273
14. Tian M., Gao Y., and Liu Y. Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate. Dent Mater 24 2 (2008) 235-243
15. Ericksona R.L., Davidsonb C.L., and Halvorsona R.H. The effect of filler and silane content on conversion of resin-based composite. Dent Mater 19 4 (2003) 327-333
16. Craig R.G., and Powers J.M. Restorative dental materials. 11th ed. (2002), St Louis, Mosby
17. Zandinejada A.A., and Pahlevana M.A. The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites. Den Mater 22 4 (2006) 382-387
18. Fong H. Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative composite resins. Polymer 45 7 (2004) 2427-2432
19. Tian M., Gao Y., and Liu Y. Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals. Polymer 48 9 (2007) 2720-2728
20. Jong-Sang K., Darrell H., and Reneker. Mechanical properties of composites using ultrafine electrospun fibers. Polym Compos 20 (1999) 124-131
21. Bergshoef M.M., and Vancso G.J. Transparent nanocomposites with ultrathin, electrospun Nylon-4,6 fiber reinforcement. Adv Mater 11 (1999) 1362-1365
22. Sun Z., Zussman E., Yarin A.L., Wendorff J.H., and Greiner A. Compound core-shell polymer nanofibers by co-electrospinning. Adv Mater 15 22 (2003) 1929-1932
23. Bazilevsky A.V., Yarin A.L., and Megaridis C.M. Co-electrospinning of core-shell fibers using a single-nozzle technique. Langmuir 23 5 (2007) 2311-2314
24. Wei M., Lee J., Kang B., and Mead J. Preparation of core-sheath nanofibers from conducting polymer blends. Macromol Rapid Commun 26 14 (2005) 1127-1132
25. Zussman E., Yarin A.L., Bazilevsky A.V., Avrahami R., and Feldman M. Electrospun polyacrylonitrile/poly(methyl methacrylate)-derived turbostratic carbon micro-/nanotubes. Adv Mater 18 (2006) 348-353
26. Chen LS, Huang ZM, Dong GH, He CL, Liu L, Hu YY, et al. Development of a transparent PMMA composite reinforced with nanofibers. Polym Compos. 2008. 10.1002/pc.20551 (Published online in Wiley InterScience (www.interscience.wiley.com)).
27. Lastumäki T.M., Lassila L.V.J., and Vallittu P.K. The semi-interpenetrating polymer network matrix of fiber-reinforced composite and its effect on the surface adhesive properties. Mater Sci Mater Med 14 9 (2003) 803-809
28. Garoushi S., Vallittu P.K., and Lassila L.V.J. Short glass fiber reinforced restorative composite resin with semi-inter penetrating polymer network matrix. Dent Mater 23 11 (2007) 1356-1362
29. Li G., Li P., and Yang X.P. Inhomogeneous toughening of carbon fiber/epoxy composite using electrospun polysulfone nanofibrous membranes by in situ phase separation. Compos Sci Tech 68 3-4 (2008) 987-994
30. Wei M., Kang B., and Sung C. Core-sheath structure in electrospun nanofibers from polymer blends. Macromol Mater Eng 291 11 (2006) 1307-1314
31. Tannenbaum R., Zubris M., and David K. FTIR characterization of the reactive interface of cobalt oxide nanoparticles embedded in polymeric matrices. J Phys Chem B 110 5 (2006) 2227-2232
32. Ciprari D., Jacob K., and Tannenbaum R. Characterization of polymer nanocomposite interphase and its impact on mechanical properties. Macromolecules 39 19 (2006) 6565-6573
33. Seo Y., Lee J., Kang T.J., Choi H.J., and Kim J. In situ compatibilizer reinforced interface between an amorphous polymer (polystyrene) and a semicrystalline polymer (polyamide nylon 6). Macromolecules 40 16 (2007) 5953-5958
34. Rong M.Z., and Zeng H.M. Polycarbonate-epoxy semi-interpenetrating polymer network: 2. Phase separation and morphology. Polymer 38 2 (1997) 269-277
35. Petersson L., and Oksman K. Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Compos Sci Tech 66 13 (2006) 2187-2196
36. Subramani S., Lee J.Y., and Kim J.H. Crosslinked aqueous dispersion of silylated poly (urethane-urea)/clay nanocomposites. Compos Sci Tech 67 7 (2007) 1561-1573
37. 2-PMMA nanocomposite: using methacrylic acid as a coupling agent. Langmuir 23 7 (2007) 3988-3995