Physical characterisation of biomass-based pyrolysis liquids application of standard fuel oil analyses

VTT Publications

Volumn , Issue 306, 1997, Pages

  Oasmaa, Anja ^a   Leppämäki, Eero ^a   Koponen, Päivi ^a   Levander, Johanna ^a   Tapola, Eija ^a  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Homogeneity; Liquids; Pyrolysis; Sampling; Solubility; Thermal decomposition

Indexed keywords

EID: 5544237568     PISSN: 12350621     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Article

References (51)

1. ASTM D 93-90. Standard test method for flash point by Pensky-Martens closed tester. Easton, MD: American Society for Testing and Materials, 1991.
2. ASTM D 97-93. Standard test method for pour point of petroleum oils. Easton, MD: American Society for Testing and Materials, 1993.
3. ASTM D 95-83. Standard test method for water in petroleum products and bituminous materials by distillation. Easton, MD: American Society for Testing and Materials, 1988.
4. ASTM D 130-94. Standard test method for detection of copper corrosion from petroleum products by the copper strip tarnish test. Easton, MD: American Society for Testing and Materials, 1994.
5. ASTM D 189-81. Standard test method for Conradson carbon residue of petroleum products. Easton, MD: American Society for Testing and Materials, 1988.
6. ASTM E 203-75. Standard test method for water using Karl Fischer reagent. Easton, MD: American Society for Testing and Materials, 1975.
7. ASTM D 445-88. Standard test method for kinematic viscosity of transparent and opaque liquids (and the calculation of dynamic viscosity). Easton, MD: American Society for Testing and Materials, 1988.
8. ASTM D 613-95. Standard test method for cetane number of diesel fuel oil. Easton, MD: American Society for Testing and Materials, 1995.
9. ASTM D 665-95. Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water. Easton, MD: American Society for Testing and Materials, 1995.
10. ASTM D 1744-83. Standard test method for water in liquid petroleum products by Karl Fischer reagent. Easton, MD: American Society for Testing and Materials, 1988.
11. ASTM D 2500-86. Standard test method for cloud point of petroleum oils. Easton, MD: American Society for Testing and Materials, 1988.
12. ASTMD 2699-68. Knock characteristics of motor fuels by the research method. Easton, MD: American Society for Testing and Materials, 1969.
13. ASTM D 2783-88. Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method). Easton, MD: American Society for Testing and Materials, 1993.
14. ASTM D 4052-88. Standard test method for density and relative density of liquids by digital density meter. Easton, MD: American Society for Testing and Materials, 1988.
15. ASTM D 4208-88. Standard test method for total chorine in coal by the oxygen bomb combustion/ion selective electrode method. Easton, MD: American Society for Testing and Materials, 1988.
16. ASTM D 4239-93. Standard test methods for sulfur in the analysis sample of coal and coke using high temperature tube furnace combustion methods. Philadelphia, PA: American Society for Testing and Materials, 1991.
17. ASTM D 5291-92. Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants. Easton, MD: American Society for Testing and Materials, 1992.
18. Aubin, H. & Roy, C. 1980. Study on the corrosiveness of wood pyrolysis oils. Fuel Science & Technology International, vol. 8, pp. 77 - 86.
19. Chum, H. L. & McKinley, J. 1988. Report on characterization of biomass pyrolysis liquid products. In: Bridgwater, A. V. & Kuester, J. L. (eds.). Research in thermochemical biomass conversion, Phoenix, Arizona, April 1988. New York: Elsevier Appl. Sci. Pp. 1177 - 1180.
20. Cuevas, A., Rebollo, L., Reinoso, C. & Scott, D. 1996. Union Fenosa fast pyrolysis developments. In: Bridgwater, A. V. & Hogan, E. N. (eds.). Bio-oil. Production & utilisation. Newbury: CPL Press. Pp. 82 - 85.
21. Czernik, S., Johnson, D. K. & Black, S. 1994. Stability of wood pyrolysis liquid. Biomass and Bioenergy, vol. 7, no. 1 - 6, pp. 187 - 192.
22. Diebold, J. P., Bridgwater, A. V., Beckman, D., Elliott, D. C. & Solantausta, Y. 1994. Technoeconomic analysis of the thermochemical conversion of biomass to gasoline by the NREL process. In: Bridgwater, A. V. (ed.). Advances in thermochemical biomass conversion. Glasgow: Blackie Academic & Professional. Vol. 1. Pp. 1325 - 1344.
23. Diebold, J. P., Milne, T., Czernik, S., Oasmaa, A., Bridgwater, A..V., Cuevas, A., Gust, S., Huffman, D. & Piskorz, J. 1997. Proposed specifications for various grades of pyrolysis oils. In: Bridgwater, A.V. & Boocock, D. G. B. (eds.). Developments in thermochemical biomass conversion, Banff, 20 - 24 May 1996. Glasgow: Blackie Academic & Professional. Vol. 1. Pp. 433 - 447.
24. Diebold, J. P., Scahill, J. W., Czernik, S., Phillips, S. D. & Feik, C. J. 1997. Progress in the production of hot-gas filtered biocrude oil at NREL. In: Bridgwater, A. V. & Hogan, E. N. (eds.). Proc. 2nd EU-Canada Workshop on Thermal Biomass Processing. Newbury: CPL Scientific Information Services Ltd. Pp. 66-81.
25. DIN EN 7. Determination of ash from petroleum products. Berlin: DIN Deutsches Institut fur Normung e.V., 1975.
26. DIN EN 116. Diesel and domestic heating fuels; determination of cold filter plugging point. Berlin: DIN Deutsches Institut für Normung e.V., 1983.
27. DIN 51900. Testing of solid and liquid fuels; determination of gross calorific value by the bomb calorimeter and calculation of net calorific value; method with the adiabatic jacket. Berlin: DIN Deutsches Institut für Normung e.V., 1977.
28. Dyroff, G. V. 1993. Manual on significance of tests for petroleum products. 6. ed. Philadelphia: ASTM, 1993.
29. Elliott, D. C. 1983. Analysis and upgrading of biomass liquefaction products. Final report. Vol. 4, IEA Co-operative project D1 Biomass Liquefaction Test Facility Project. Richland, Washington: Pacific Northwest Laboratory. 87 p. + app.
30. Elliott, D. C. 1994. Water, alkali, and char in flash pyrolysis liquids. Biomass and Bioenergy, vol. 7, no. 1 - 6, pp. 179 - 185.
31. Fagernäs, L. 1995. Chemical and physical characterisation of biomassbased pyrolysis oils. Literature review. Espoo: Technical Research Centre of Finland. 113 p. + app. 2 p. (VTT Research Notes 1706.)
32. TM). In: Bridgwater, A. V. & Hogan, E. N. (eds.). Bio-oil. Production & utilisation. Newbury: CPL Press. Pp. 86 - 95.
33. Graham, R. G., Freel, B. A., Huffman, D. R. & Bergougnou, M. A. 1994. In: Bridgwater, A. V. (ed.). Advances in thermochemical biomass conversion. Glasgow: Blackie Academic & Professional. Vol. 2. Pp. 1275 - 1288.
34. Gust, S. 1994. Flash pyrolysis fuel oil. In: Proc. Biomass pyrolysis oil properties and combustion meeting, 26 - 28 Sept. 1994, Estes Park, CO. Golden, CO: NREL. Pp. 316 - 320. (NREL-CP-430-7215.)
35. Hallgren, B. 1996. Test report of Metlab Miljö AB. Skelleftehamn: Metlab Miljö AB. 17 p. (Reg. no. ALL-1668, 1996 02 08-09.)
36. Leroy, J., Choplin, L. & Kallaguime, S. 1988. Rheolological characterization of pyrolytic wood derived oils: Existence of a compensation effect. Chem. Eng. Comm., vol. 71, pp. 157 - 176.
37. Maggi, R. E. & Elliott, D. C. 1997. Upgrading overview. In: Bridgwater, A. V. & Boocock, D. G. B. Developments in thermochemical biomass conversion, Banff, 20 - 24 May 1996. Glasgow: Blackie Academic & Professional. Vol. 1. Pp. 575-588.
38. McKinley, J. W., Overend, R. P. & Elliott, D. C. 1994. The ultimate analysis of biomass liquefaction products: The results of the IEA round robin #1. In: Proc. Biomass pyrolysis oil properties and combustion meeting, 26 - 28 September 1994, Estes Park, CO. Golden, CO: NREL. Pp. 34 - 53.(NREL-CP-430-7215.)
39. McKinley. 1989. Biomass liquefaction: centralized analysis. Final report. Vancouver: B. C. Research. (Project No. 4-03-837. DSS File No. 23216-4-6192.)
40. Meier, D., Oasmaa, A. & Peacocke, G. V. C. 1997. Properties of fast pyrolysis liquids: status of test methods. Characterisation of fast pyrolysis liquids. In: Bridgwater, A. V. & Boocock, D. G. B. (eds.). Developments in thermochemical biomass conversion, Banff, 20 - 24 May 1996. London: Blackie Academic & Professional. Vol. 1. Pp. 391 - 408.
41. Milne, T. A., Brennan, A. H. & Glenn, B. H. 1990. Sourcebook of methods of analysis for biomass and biomass conversion processes. London: Elsevier Appl. Sci. 327 p. + app.
42. Oasmaa, A. & Sipilä, K. 1995. Pyrolysis liquid properties - Use of pyrolysis liquid as fuel in medium-speed diesel engines. In: Bridgwater, A. V. & Hogan, E. N. (eds.). Bio-oil production & utilisation. Proc. 2nd EU-Canada Workshop on Thermal Biomass Processing. Newbury: CPL Press, 1996. Pp. 175- 185.
43. Peacocke, G. V. C., Russell, P. A., Jenkins, J. D. & Bridgwater, A. V. 1994. Physical properties of flash pyrolysis liquids. Biomass & Bioenergy, vol. 7, no. 1 -6, pp. 169- 177.
44. Piskorz, J., Radlein, D., Majerski, P. & Scott, D. S. 1996. The Waterloo fast pyrolysis process. In: Proc. Biomass pyrolysis oil properties and combustion meeting, 26 - 28 September 1994, Estes Park, CO. Springfield, VA: National Technical Information Service, 1994. Pp. 22 - 26.
45. Rick, F. & Vix, U. 1991. Product standards for pyrolysis products for use as fuel in industrial firing plants. In: Bridgwater, A. V. & Grassi, G. (eds.). Biomass pyrolysis liquids upgrading and utilization. London & New York: Elsevier Applied Science. Pp. 177-218.
46. Riedel-de Haen. 1988. HYDRANAL Manual, Eugen Scholz reagents for Karl Fischer titration. Seelze. P. 123.
47. Särkilahti, H. 1996. Pyrolyysiöljyn suodatus (Filtration of pyrolysis oil). Master thesis. Espoo: Helsinki University of Technology, 1996. 86 p. (In Finnish.)
48. Scott, D. S., Piskorz, J., Bergougnou, M. A., Graham, R. & Overend, R. P. 1988. The role of temperature in the fast pyrolysis of cellulose and wood. Ind. Eng. Chem. Res., vol. 27, pp. 8-15.
49. Solantausta, Y., Nylund, N-O., Westerholm, M., Koljonen, T. & Oasmaa, A. 1993. Wood pyrolysis liquid as fuel in a diesel power plant. Bioresource Technology, Vol. 46, no. 1 & 2, pp. 177 - 188.
50. Suppes, G. J., Natarajan, V. P. & Chen, Z. 1996. Autoignition of select oxygenated fuels in a simulated diesel engine environment. In: AICHE 1996 National Meeting, 26 Febr. 1996. Paper 74e. New Orleans, LA: AICHE. 9 p. (Available from the Engineering Library, New York City.)
51. Wilen, C. & Kurkela, E. 1996. Biomass feedstock analyses. Espoo: Technical Research Centre of Finland. 25 p. + app. 8 p. (VTT Publications 282.)