Fatigue crack growth through a residual stress field introduced by plastic beam bending

Fatigue and Fracture of Engineering Materials and Structures

Volumn 31, Issue 10, 2008, Pages 863-875

  Jones, Keith W ^a   Dunn, M L ^a  

^a UCB 450   (United States)

Author keywords

Fatigue crack growth; Partial crack closure; Residual stress; Slitting method; Stress intensity factor; Superposition

Indexed keywords

ABS RESINS; BENDING (DEFORMATION); BRITTLE FRACTURE; CRACK CLOSURE; CRACK DETECTION; CRACKING (CHEMICAL); FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; FATIGUE TESTING; FORECASTING; FRACTURE; FRACTURE MECHANICS; PLASTICS; RESIDUAL STRESSES; SLITTING; STRENGTH OF MATERIALS; STRESS RELAXATION; STRESSES;

FATIGUE CRACK GROWTH; PARTIAL CRACK CLOSURE; SLITTING METHOD; STRESS INTENSITY FACTOR; SUPERPOSITION;

CRACKS;

EID: 54949155964     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2008.01274.x     Document Type: Article

References (59)

1. Parker, A. P. (1982) Stress intensity factors, crack profiles, and fatigue crack growth rates in residual stress fields. ASTM STP 776, pp. 13-31.
2. Nelson, D. V. (1982) Effects of residual stress on fatigue crack propagation. ASTM STP 776, pp. 172-194.
3. Saada, A. S. (1993) Elasticity Theory and Applications. Krieger Publishing Co., Malabar, Fl.
4. Juvinall, R. C. and Marshek, K. M. (1991) Fundamentals of Machine Component Design. John Wiley & Sons Inc., New York.
5. Stacey, A. and Webster, G. A. (1988) Influence of residual stress on fatigue crack growth in thick-walled cylinders. ASTM STP 1004, pp. 107-121.
6. Pavier, M. J., Poussard, C. G. C. and Smith, D. J., (1999) Effect of residual stress around cold worked holes on fracture under superimposed mechanical load. Eng. Fract. Mech. 63, 751-773.
7. LaRue, J. E. and Daniewicz, S. R. (2007) Predicting the effect of residual stress on fatigue crack growth. Int. J. Fatigue, 29, 508-515.
8. Elber, W. (1970) Fatigue crack closure under cyclic tension. Eng. Fract. Mech. 2, 37-44.
9. Elber, W. (1971) The significance of fatigue crack closure. ASTM STP 486, 230-242.
10. E647-00, Standard test method for measurement of fatigue crack growth rates. American Society for Testing and Materials.
11. Schijve, J. (1988) Fatigue crack closure: Observations and technical significance. ASTM STP 982, pp. 5-34.
12. Dugdale, D. S. (1960) Yielding in steel sheets containing slits. J. Mech. Phys. Solid 8, 100-104.
13. Barenblatt, G. I. (1962) The mathematical theory of equilibrium cracks in brittle fracture. Advan. Appl. Mech. 7, 55-129.
14. Newman, J. C. Jr. (1981) A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. NASA Technical Memorandum 81941. Langley Research Center.
15. Newman, J. C. Jr. (1981) Prediction of fatigue crack growth under variable amplitude and spectrum loading using a closure model. NASA Technical Memorandum 81942. Langley Research Center.
16. Newman, J. C. Jr. (1981) Methods and models for predicting fatigue crack growth under random loading. ASTM STP 748, pp. 53-84.
17. McClung, R. C. and Sehitoglu, H. (1989) On the finite-element analysis of fatigue crack closure. Part 1. Basic modeling issues. Eng. Fract. Mech. 33, 237-252.
18. McClung, R.C. and Sehitoglu, H. (1989) On the finite-element analysis of fatigue crack closure. Part 2. Numerical results. Eng. Fract. Mech. 33, 253-272.
19. Solanki, K., Daniewicz, S.R. and Newman, J.C. (2004) Finite element analysis of plasticity-induced fatigue crack closure: An overview. Eng. Fract. Mech. 71, 149-171.
20. González-Herrera, A. and Zapatero, J. (2005) Influence of minimum element size to determine crack closure stress by finite element method. Eng. Fract. Mech. 72, 337-355.
21. Zapatero, J., Moreno, B. and González-Herrera, A. (2008) Fatigue crack closure determination by means of finite element analysis. Eng. Fract. Mech. 75, 41-57.
22. Bueckner, H. F. (1958) The propagation of cracks and the energy of elastic deformation. Trans. ASME 80, 1225-1229.
23. Heaton, M. D. (1976) On the calculation of stress intensity factors due to thermal and residual stress fields. CEGB Research Report NW/SSD/RR/ 158.
24. Wu, X. and Carlsson, A. J. (1991) Weight Functions and Stress Intensity Factor Solutions. Pergamon Press, Oxford, U.K.
25. Cheng, W. and Finnie, I. (2007) Residual Stress and the Slitting Method. Springer, New York.
26. Underwood, J. H., Pook, L. P. and Sharples, J. K. (1977) Fatigue-crack propagation through a measured residual stress field in alloy steel. ASTM STP 631, pp. 402-215.
27. Kapadia, B. M. (1978) Influence of residual stresses on fatigue crack propagation in electroslag welds. ASTM STP 648, pp. 244-260.
28. Lam, Y. C. and Lian, K. S. (1989). The effect of residual stress and its redistribution on fatigue crack growth. Theor. Appl. Fract. Mech. 12, 59-66.
29. Kang, K. J., Song, J. H. and Earmme, Y. Y. (1990) Fatigue crack growth and closure behavior through a compressive residual stress field. Fatigue Fract. Eng. Mater. Struct. 13, 1-13.
30. Beghini, M. and Bertini, L. (1990) Fatigue crack propagation through residual stress fields with closure phenomena. Eng. Fract. Mech. 36, 379-387.
31. Beghini, M., Bertini, L and Vitale, E. (1994) Fatigue crack growth in residual stress fields: Experimental results and modeling. Fatigue Fract. Eng. Mater. Struct. 17, 1433-1444.
32. Wilks, M. D. B., Nowell, D. and Hills, D. A. (1993) The evaluation of stress intensity factors for plane cracks in residual stress fields. J. Strain Anal. 28, 145-152.
33. Stefanescu, D., Dutta, M., Wang, D. Q., Edwards, L. and Fitzpatrick, M. E. (2003) The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes. J. Strain Anal. Eng. Design 38, 419-427.
34. Stefanescu, D. (2004). Measurement and prediction of fatigue crack growth from cold expanded holes. Part 1. The effect of fatigue crack growth on cold expansion residual stresses. J. Strain Anal. Eng. Design 39, 25-39.
35. Kokaly, M. T., Ransom, J. S., Jude, B. S., Restis, H. and Reid, L. (2005). Predicting fatigue crack growth in the residual stress field of a cold worked hole. J. ASTM Int. 2, 119-131.
36. Morrow, J. and Sinclair, G. M. (1958). Cycle-dependent stress relaxation. ASTM STP 237, pp. 83-109.
37. Ozdemir, A. T. and Edwards, L. (1997). Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fract. Eng. Mater. Struct. 20, 1443-1451.
38. Fitzpatrick, M. E. and Edwards, L. (1998) Fatigue crack/residual stress field interactions and their implications for damage-tolerant design. J. Mater. Eng. Perform. 7, 190-198.
39. Stefanescu, D. (2004) Measurement and prediction of fatigue crack growth from cold expanded holes. Part 2. prediction of fatigue crack growth from cold expanded holes. J. Strain Anal. Eng. Design, 39, 41-53.
40. Ghidini, T. and Donne, C. D. (2006) Fatigue crack propagation assessment based on residual stresses obtained through cut-compliance technique. Fatigue Fract. Eng. Mater. Struct. 30, 214-222.
41. Clark, W. G. and Hudak, S. J. (1975) Variability in fatigue crack growth rate testing. J. Test Eval. 3, 454-476.
42. Cathey, W. H. and Grandt, A. F. (1980) Fracture mechanics consideration of residual stresses introduced by cold working fastener holes. J. Eng. Mater. Technol. Trans. ASME 102, 85-91.
43. Schijve, J. (1976) The effect of pre-strain on fatigue crack growth and crack closure. Eng. Fract. Mech. 8, 575-581.
44. Bussu, G. and Irving, P. E. (2003) The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminum joints. Int. J. Fatigue 25, 77-88.
45. Prime, M. B., Rangaswamy, P., Daymond, M. R. and Abeln, T. G. (1998) Several methods applied to measuring residual stress in a known specimen. In: Proceedings of the SEM Spring Conference on Experimental and Applied Mechanics, Houston, TX, pp. 497-499.
46. James, M. R. (1981) The relaxation of residual stresses during fatigue. Residual Stress and Stress Relaxation. In: Proceedings of the 28th Sagamore Army Materials Research Conference, Lake Placid, NY, pp. 297-314.
47. Mayville, R. A. and Finnie, I. (1982) Uniaxial stress-strain curves from a bending test. Exp. Mech. 22, 197-201.
48. Hudson, C. (1969) Effect of stress ratio on fatigue crack growth in 7075-T6 and 2024-T3 aluminum alloy specimens. NASA TN D-5390.
49. Forman, R. G., Shivakumar, V., Cardinal, J. W., Williams, L. C. and McKeighan, P. C. (2005) Fatigue crack growth database for damage tolerance analysis, DOT/FAA/AR-05/15, U.S. Department of Transportation, Federal Aviation Administration.
50. Liu, A. F. (1979) The effect of residual stresses on crack growth from a hole. NOR-79-74, Northrop Corporation Aircraft Group.
51. Romeiro, F. F. J., Domingos, C. A. and de Freitas, M. J. M. (1999) Measurement of fatigue crack closure for negative stress ratio. ASTM STP 1343, pp. 321-336.
52. Kang, K. J., Song, J. H. and Earmme, Y. Y. (1989) Fatigue crack growth and closure through a tensile residual stress field under compressive applied loading. Fatigue Fract. Eng. Mater. Struct. 12, 363-376.
53. Hoagland, R. G., Marschall, C. W. and Duckworth, W. H. (1976) Reduction of errors in ceramic bend tests. J. Am. Ceramic Soc. 59, 189-192.
54. Helm, J. D., McNeill, S. R. and Sutton, M. A. (1996) Improved three-dimensional image correlation for surface displacement measurement. Opt. Eng. 35, 1911-1920.
55. Cheng, W. and Finnie, I. (1994) An overview of the crack compliance method for residual stress measurement. In: Proceedings of the Fourth International Conference on Residual Stresses, Baltimore, MD, pp. 449-458.
56. ABAQUS user's manual, version 6.7 (2007) Hibbit, Karlsson and Sorensen, HKS Inc, Pawtucket, USA.
57. Courtin, S., Gardin, C., Bezine, G. and Ben Hadj Hamouda, H. (2005) Advantages of the J-integral approach for calculating stress intensity factors when using the commercial finite element software ABAQUS. Eng. Fract. Mech. 72, 2174-2185.
58. Tada, H., Paris, P. C. and Irwin, G. R. (1985). The Stress Analysis of Cracks Handbook. 2nd edition. Paris Productions Inc., St. Louis, MO.
59. Harter, J. A. (2004). AFGROW user's Guide and Technical Manual, AFRL=VA= WP=TR=2004=XXXX.