EthyleneVinyl acetate/natural rubber/ organoclay nanocomposites: Effect of sulfur and peroxide vulcanization

Journal of Reinforced Plastics and Composites

Volumn 27, Issue 16-17, 2008, Pages 1925-1945

  Munusamy, Y ^a   Ismail, H ^a   Mariatti, M ^a   Ratnam, C T ^b  

^a SCHOOL OF CHEMICAL ENGINEERING   (Malaysia)

^b MALAYSIAN NUCLEAR AGENCY   (Malaysia)

Author keywords

Crosslink; Dynamic vulcanization; Nanocomposites; Organoclay; Tensile properties; Thermal properties; Thermoplastic elastomer

Indexed keywords

AGGLOMERATION; ETHYLENE; NANOCOMPOSITES; ORGANOCLAY; OXIDATION; PHOTODEGRADATION; POLYMER MATRIX COMPOSITES; POLYMERS; REINFORCED PLASTICS; RHEOMETERS; RUBBER; RUBBER COMPOUNDING; SCANNING ELECTRON MICROSCOPY; SILICATES; SULFUR; SYNTHETIC RUBBER; THERMODYNAMIC PROPERTIES; THERMODYNAMIC STABILITY; VULCANIZATION; X RAY ANALYSIS;

CROSSLINK; CROSSLINK DENSITIES; DYNAMIC VULCANIZATION; ETHYLENE VINYL ACETATES; HAAKE RHEOMETERS; INTERNAL MIXERS; NATURAL RUBBERS; ORGANOCLAY NANOCOMPOSITES; PROCESSING PROPERTIES; ROTOR SPEEDS; SCANNING ELECTRON MICROSCOPES; SILICATE LAYERS; SULFUR SYSTEMS; SULFUR VULCANIZATES; SWELLING BEHAVIORS; THERMAL DEGRADATIONS; THERMAL PROPERTIES; THERMAL STABILITIES; VULCANIZATES; VULCANIZING SYSTEMS; X-RAY DIFFRACTIONS;

NANOSTRUCTURED MATERIALS;

EID: 54949127585     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684407084161     Document Type: Article

References (42)

1. Hull, T.R., Price, D., Liu, Y., Wills, C.L. and Brady, J. (2003). An Investigation into the Decomposition and Burning Behaviour of Ethylene-Vinyl Acetate Copolymer Nanocomposite Materials, Polymer Degradation and Stability, 82: 365-371.
2. Zurina, M., Ismail, H. and Ratnam, C.T. (2006). Characterization of Irradiation-induced Crosslink of Epoxidised Natural Rubber/Ethylene Vinyl Acetate (ENR-50/EVA) Blend, Polymer Degradation and Stability, 91: 2723-2730.
3. Arroyo, M., Lo'pez-Manchado, M.A., Valenti'n, J.L. and Carretero, J. (2006). Morphology/Behaviour Relationship of Nanocomposites Based on Natural Rubber/Epoxidized Natural Rubber Blends, Composite Science and Technology, 67 (7). 1330-1339.
4. Thompson, M.R. and Yeung, K.K. (2006). Recyclability of a Layered Silicate-Thermoplastic Olefin Elastomer Nanocomposite, Polymer Degradation and Stability, 91: 2396-2407.
5. Wang, K., Liang, S., Du, R., Zhang, Q. and Fu, Q. (2004). The Interplay of Thermodynamics and Shear on the Dispersion of Polymer Nanocomposite, Polymer, 45: 7953-7960.
6. Eckel, D.B., Balogh, M.P., Fasulo, P.D. and Rodgers, W.R. (2003). Assessing Organo-clay Dispersion in Polymer Nanocomposites, Journal of Applied Polymer Science, 93: 1110-1117.
7. Fornes, T.D., Yoon, P.J. and Paul, D.R. (2003). Polymer Matrix Degradation and Color Formation in Melt Processed Nylon 6/clay Nanocomposites, Polymer, 44: 7545-7556.
8. Morawiec, J., Pawlak, A., Slouf, M., Galeski, A., Piorkowska, E. and Krasnikowa, N. (2005). Preparation and Properties of Compatibilized LDPE/Organo-modified Montmorillonite Nanocomposites, European Polymer Journal, 41: 1115-1122.
9. Weon, J.I. and Sue H. J. (2005). Effects of Clay Orientation and Aspect Ratio on Mechanical Behavior of Nylon - 6 Nanocomposites, Polymer, 46: 6325-6334.
10. Varghese, S., Karger-Kocsis, J. and Gatos, K.G. (2003). Melt Compounded Epoxidized Natural Rubber/ Layered Silicate Nanocomposites: Structure -Properties Relationship, Polymer, 44: 3977-3983.
11. Zhang, H., Wang, Y., Wu, Y., Zhang, L. and Yang, J. (2005). Study on Flammability of Montmorillonite/ Styrene-Butadiene Rubber (SBR) Nanocomposites, Journal of Applied Polymer Science, 97: 844-849.
12. Oberdisse, J., Harrak, A.E., Carrot, G., Jestin, J. and Boue, F. (2005). Structure and Rheological Properties of Soft Hard Nanocomposites: Influence of Aggregation and Interfacial Modification, Polymer, 46: 6695-6705.
13. Sanguansap, K., Suteewong, T., Saendee, P., Buranabunya, U. and Tangboriboonrat, P. (2005). Composite Natural Rubber Based Latex Particle: A Novel Approach, Polymer, 46: 1373-1378.
14. Mishra, J.K., Ryo, J.H., Kim, G.H., Hwang, K.J. and Chang-Sik, Ha. K. (2004). Preparation and Properties of a New Thermoplastic Vulcanizate (TPV)/Organoclay Nanocomposite using Maleic Anhydride Funtionalized Polypropylene as a Compatibilizer, Material Letters, 58: 3481-3485.
15. Naskar, K., Kokot, D. and Noordermeer, J.W.M. (2004). Influence of Various Stabilizers on Ageing of Dicumyl Peroxide - Cured Polypropylene/Ethylene - Propylene - Diene Thermoplastic Vulcanizates, Polymer Degradation and Stability, 85: 831-839.
16. Salgueiro, W., Somozaa, A., Marzocca, A.J., Consolati, G. and Quasso, F. (2007). Evolution of the Crosslink Structure in the Elastomers NR and SBR, Radiation Physics and Chemistry, 76: 142-145.
17. Van Der Horst, M., McGill, W.J. and Woolard, C.D. (2006). The Tensile Properties of Strain-Crystallizing Vulcanizates. III. The Superiority of Conventional over Peroxide Vulcanizates in terms of Network Microstructure, Journal of Applied Polymer Science, 102, 876-884.
18. Gonzlez, L., Rodrguez, A., Marcos-Fernandez, A., Valentn, J.L. and Fernandez-Torres, A. (2007). Effect of Network Heterogeneities on the Physical Properties of Nitrile Rubbers Cured with Dicumyl Peroxide, Journal of Applied Polymer Science, 103: 3377-3382.
19. Ellul, M.D., Tsou, A.H. and Hu, W. (2004). Crosslink Densities and Phase Morphologies in Thermoplastic Vulcanizates, Polymer, 45: 3351-3358.
20. George, J., Neelakantan, N.R., Varughese, K.T. and Thomas, S. (2006). Failure Properties of Thermoplastic Elastomers from Polyethylene/Nitrile Rubber Blends: Effect of Blend Ratio, Dynamic Vulcanization, and Filler Incorporation, Journal of Applied Polymer Science, 100: 2912-2929.
21. Soto-Oviedo, M.A. and De Paoli, M.A. (2006). Dynamic Vulcanization of Thermoplastic Elastomers Based on Poly(Epichlorohydrin-Co-Ethylene Oxide) and Polypropylene, Polymer Bulletin, 56: 75-85.
22. Kim, K.H., Cho, W.J. and Ha, C. (1996). Properties of Dynamically Vulcanized EPDM and LLDPE Blends, Journal of Applied Polymer Science, 59: 407-414.
23. Zhang, X., Huang, H. and Zhang, Y. (2002). Dynamically Vulcanized Nitrile Rubber/Polypropylene Thermoplastic Elastomers, Journal of Applied Polymer Science, 85: 2862-2866.
24. Yang, I. and Tsai, P. (2006). Intercalation and Viscoelasticity of Poly(ether-block-amide) Copolymer/ Montmorillonite Nanocomposites: Effect of Surfactant, Polymer, 47: 5131-5140.
25. Callister, W.D. (1997). Materials Science and Engineering: An Introduction, 4 th edn, John Wiley Sons Inc., New York.
26. George, J., Varughese, K.T. and Thomas, S. (2000). Dynamically Vulcanised Thermoplastic Elastomer Blends of Polyethylene and Nitrile Rubber, Polymer, 41: 1507-1517.
27. Paul, D.R. and Barlow, J.W. (1980). Polymer Blends (or Alloys), Journal of Macromolecular Science, C18: 109-168.
28. Sung, Y.T., Kum, C.K., Lee, H.S., Kim, J.S., Yoon, H.G. and Kim, W.N. (2005). Effects of Crystallinity and Crosslinking on the Thermal and Rhelogical Properties of Ethylene Vinyl Acetate Copolymer, Polymer, 46: 11844-11848.
29. Radhakrishnan, C.K., Alex, R. and Unikrishnan, G. (2006). Thermal, Ozone and Gamma Ageing of Styrene Butadiene Rubber and Poly(ethylene-co-vinyl acetate) Blends, Polymer Degradation and Stability, 91: 902-910.
30. Lpez-Manchado, M.A., Arroyo, M., Herrero, B. and Biagiotti, J. (2003). Vulcanization Kinetics of Natural Rubber-Organoclay Nanocomposites, Journal of Applied Polymer Science, 89: 1-15.
31. Teh, P.L., Mohd Ishak, Z.A., Hashim, A.S., Karger-Kocsis, J. and Ishiaku, U.S. (2004). On The Potential of Organoclay with Respect to Conventional Fillers (Carbon Black, Silica) for Epoxidized Natural Rubber Compatibilized Natural Rubber Vulcanizates, Journal of Applied Polymer Science, 94: 2438-2445.
32. Gatos, K.G. and Karger-Kocsis, J. (2005). Effects of Primary and Quaternary Amine Intercalants on the Organoclay Dispersion in a Sulfur-cured EPDM Rubber, Polymer, 46: 3069-3076.
33. Nasir, M. and Teh, G.K. (1988). The Effects of Various Types of Crosslinks on the Physical Properties of Natural Rubber, European Polymer Journal, 24: 733-736.
34. Boochathum, P. and Prajudtake, W. (2001). Vulcanization of Cis- and Trans-polyisoprene and their Blends: Cure Characteristics and Crosslink Distribution, European Polymer Journal, 37: 417-427.
35. Guduri, B.R. and Luyt, A.S. (2007). Effect of Ethylene Glycidyl Methacrylate Compatibilizer on the Structure and Mechanical Properties of Clay Nanocomposites Modified with Ethylene Vinyl Acetate Copolymer, Journal of Applied Polymer Science, 103: 4095-4101.
36. Usuki, A., Tukigase, A. and Kato, M. (2002). Preparation and Properties of EPDM-clay Hybrids, Polymer, 43: 2185-2189.
37. Gatos, K.G., Szazdi, L., Pukanszky, B. and Karger-Kocsis, J. (2005). Controlling the Deintercalation in Hydrogenated Nitrile Rubber (HNBR)/Organo-Montmorillonite Nanocomposites by Curing with Peroxide, Macromolecular Rapid Communication, 26: 915-919.
38. Tang, Y., Hu, Y., Wang, S., Gui, Z., Chen, Z. and Fan, W. (2002). Preparation and Flammability of Ethylene-Vinyl Acetate Copolymer/Montmorillonite Nanocomposites, Polymer Degradation and Stability, 78: 555-559.
39. Teh, P.L., Mohd Ishak, Z.A., Hashim, A.S., Karger-Kocsis, J. and Ishiaku, U.S. (2006). Physical Properties of Natural Rubber/Organoclay Nanocomposites Compatibilized with Epoxidized Natural Rubber, Journal of Applied Polymer Science, 100: 1083-1092.
40. George, S.C., Knrgen, M. and Thomas, S. (1999). Effect of Nature and Extent of Crosslinking on Swelling and Mechanical Behavior of Styrene - Butadiene Rubber Membranes, Journal of Membrane Science, 163: 1-17.
41. Soares, G. and Jansen, P. (1996). Effect of Compatibilizer and Curing System on the Thermal Degradation of Natural Rubber/EVA Copolymer Blends, Polymer Degradation and Stability, 52: 95-99.
42. Pandey, J.K., Reddy, K.R., Kumar, A.P. and Sing, R.P. (2005). An Overview on the Degradability of Polymer Nanocomposites, Polymer Degradation and Stability, 88: 234-250.