Droplet behaviors on substrates in thin-film formation using ink-jet printing

JSME International Journal, Series B: Fluids and Thermal Engineering

Volumn 47, Issue 3, 2004, Pages 490-496

  Ikegawa, Masato ^a   Azuma, Hitoshi ^a  

^a HITACHI LTD   (Japan)

Author keywords

Coffee stain; Deposition; Droplet; Drying; Film; Free surface flow; Ink jet; OLED; Spreading

Indexed keywords

DEPOSITION; DRYING; EVAPORATION; VELOCITY MEASUREMENT;

DROPLET VOLUME; DROPLETS; INKJET DEPOSITION;

THIN FILMS;

PRINTING;

EID: 5444235351     PISSN: 13408054     EISSN: None     Source Type: Journal    
DOI: 10.1299/jsmeb.47.490     Document Type: Article

References (29)

1. Hoang, H. and Godin, R., Development of CSP Solder Ball Attach Utilizing Metal Jet Technology, CSP Related Tech. Conf., SEMI 1997, (1997), pp.E1-5.
2. Hebner, T.R., Wu, C.C., Marcy, D., Lu, M.H. and Sturm, J.C., Ink-Jet Printing Doped Polymers for Organic Light Emitting Devices, Appl. Phys. Lett., Vol.72, No.5 (1998), pp.519-521.
3. Shimoda, T., Kanbe, S., Kobayashi, H., Seki, S., Kiguchi, H., Yudasaka, I., Kimura, M., Miyashita, S., Friend, R.H., Burroughes, J.H. and Towns, C.R., Multicolor Pixel Patterning of Light-Emitting Polymers by Ink-Jet Printing, SID 99 DIGEST, (1999), pp.376-379.
4. Sirringhaus, H., Kawase, T., Friend, R.H., Shimoda, T., Inbasekaran, M., Wu, W. and Woo, E.P., High-Resolution Inkjet Printing of All-Polymer Transistor Circuits, Science, Vol.290 (2000), pp.2123-2126.
5. Shield, T.W., Bogy, D.B. and Talke, F.E., Drop Formation by DOD Ink-Jet Nozzles: A Comparison of Experiment and Numerical Simulation, IBM J. Res. Develop., Vol.31, No.1 (1987), pp.96-110.
6. Bogy, D.B., Drop Formation in a Circular Liquid Jet, Ann. Rev. Fluid. Mech., Vol.11 (1979), pp.207-229.
7. Badie, R. and de Lange, D.F., Mechanism of Drop Constriction in a Drop-on-Dedmand Inkjet System, Proc. R. Soc. Lond. A, Vol.453 (1997), pp.2573-2581.
8. Bechtel, S.E., Bogy, D.B. and Talke, F.E., Impact of a Liquid Drop against a Flat Surface, IBM J. Res. Develop., Vol.25, No.6 (1981), pp.963-971.
9. Fukai, J., Numerical Simulation of Deforming Liquid Droplets on Flat Surfaces, Recent Res. Devel. Heat, Mass & Momentum Transfer, Vol.2 (1999), pp.83-102.
10. Cheng, L., Dynamic Spreading of Drops Impacting onto a Solid Surfaces, Ind. Eng. Chem., Process Des. Dev., Vol.16 (1977), pp.192-197.
11. Asai, A., Shioya, M., Hirasawa, S. and Okazaki, T., Impact of an Ink Drop on Paper, J. Imaging. Sci. and Tech., Vol.37, No.2 (1993), pp.205-207.
12. Scheller, B.L. and Bousfield, D.W., Newtonian Drop Impact with a Solid Surface, AIChE J., Vol.41, No.6 (1995), pp.1357-1367.
13. Mao, T. and Kuhn, D.C.S., Spread and Rebound of Liquid Droplets upon Impact on Flat Surfaces, AIChE J., Vol.43, No.9 (1997), pp.2169-2179.
14. Fukai, J., Tanaka, M. and Miyatake, O., Maximum Spreading of Liquid Droplets Colliding with Flat Surfaces, J. Chem. Eng. Japan, Vol.31 (1998), pp.456-461.
15. Kavehpour, P., Ovryn, B. and McKinley, G.H., Evaporatively-Driven Marangoni Instabilities of Volatile Liquid Films Spreading on Thermally Conductive Substrates, Coll. and Surf. A, Vol.206 (2002), pp.409-423.
16. Tanner, L.H., The Spreading of Silicone Oil Drops on Horizontal Surfaces, J. Phys. D: Appl. Phys., Vol.12 (1979), pp.1473-1484.
17. de Gennes, P.G., Wetting: Statics and Dynamics, Rev. Mod. Phys., Vol.57, No.3 (1985), pp.827-863.
18. Marmur, A., Equilibrium and Spreading of Liquids on Solid Surfaces, Advances in Colloid and Interface Science, Vol.19 (1983), pp.75-102.
19. El Bediwi, A.B., Kulnis, W.J., Luo, Y., Woodland, D. and Unertl, W.N., Distributions of Latex Particles Deposited from Water Suspensions, Mater. Res. Soc. Symp. Proc., Vol.372 (1995), pp.277-282.
20. Parisse, F. and Allain, C., Shape Changes of Colloidal Suspension Droplets during Drying, J. Phys. II, Vol.6 (1996), pp.1111-1119.
21. Adachi, E., Dimitrov, A.S. and Nagayama, K., Stripe Patterns Formed on a Glass Surface during Droplet Evaporation, Langmuir, Vol.11 (1995), pp.1057-1060.
22. Conway, J., Korns, H. and Fisch, M.R., Evaporation Kinematics of Polystyrene Bead Suspensions, Langmuir, Vol.13 (1997), pp.426-431.
23. Denkov, N.D., Velev, O.D., Kralchevsky, P.A., Ivanov, I.B., Yoshimura, H. and Nagayama, K., Mechanism of Formation of Two-Dimensional Crystals from Latex Particles on Substrates, Langmuir, Vol.8 (1992), pp.3183-3190.
24. Fanton, X. and Cazabat, A.M., Spreading and Instabilities Induced by a Solutal Marangoni Effect, Langmuir, Vol.14 (1998), pp.2554-2561.
25. Yang, W.-J., Natural Convection in Evaporating Droplets, Handbook of Heat and Mass Transfer, Vol.1 (1986), pp.211-229.
26. Deegan, R.D., Bakajin, O., Dupont, T.F., Huber, G., Nagel, S.R. and Witten, T.A., Capillary Flow as the Cause of Ring Stains from Dried Liquid Drops, Nature, Vol.389 (1997), pp.827-829.
27. Deegan, R.D., Bakajin, O., Dupont, T.F., Huber, G., Nagel, S.R. and Witten, T.A., Contact Line Deposits in an Evaporating Drop, Phys. Rev., E, Vol.62, No.1 (2000), pp.756-765.
28. Deegan, R.D., Pattern Formation in Drying Drops, Phys. Rev., E, Vol.61, No.1 (2000), pp.475-485.
29. Morii, K. and Shimoda, T., Film Formation by Inkjet, Hyomenkagaku, (in Japanese), Vol.24, No.2 (2003), pp.90-97.