Controlling hydrogen embrittlement in precharged ultrahigh-strength steels

Corrosion

Volumn 63, Issue 7, 2007, Pages 689-703

  Dogan, H ^a   Li, D ^a   Scully, J R ^a  

^a University of Virginia   (United States)

Author keywords

Cadmium plating; Hydrogen embrittlement; Hydrogen trapping; Thermal baking; Ultrahigh strength steel

Indexed keywords

ALLOY STEEL; BINDING ENERGY; BINDING SITES; BINS; CADMIUM; CADMIUM PLATING; CHROMIUM COMPOUNDS; COBALT COMPOUNDS; CRACK PROPAGATION; CRACK TIPS; CRACKS; DUCTILE FRACTURE; FRACTURE TOUGHNESS; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; HYDROGEN; IRON COMPOUNDS; MARTENSITIC STEEL; MOLYBDENUM; MOLYBDENUM COMPOUNDS; PRECIPITATION (CHEMICAL); THERMAL DESORPTION SPECTROSCOPY;

COMPLEX PRECIPITATION; FRACTURE PROCESS ZONE; HYDROGEN CONCENTRATION; HYDROGEN TRAPPING; MARTENSITIC MICROSTRUCTURE; THERMAL BAKING; THRESHOLD STRESS INTENSITY; ULTRA HIGH STRENGTH STEEL;

HYDROGEN EMBRITTLEMENT;

EID: 54249118643     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3278418     Document Type: Article

References (64)

1. M.G.H. Wells, Key Eng. Mater. 77-78 (1993): p. 71-80.
2. G.B. Olson, Adv. Mater. Process. 7 (1997): p. 72-9.
3. R.M. Hemphill, D.E. Wert, "High Strength, High Fracture Toughness Structural Steel," U.S. Patent no. 5,087, 415 (1992).
4. W.M. Garrison, Jr., J. Met. 46 (1990): p. 20-4.
5. R. Ayer, P.M. Machmeier, Metall. Trans. A 24A (1993): p. 1,943-1,955.
6. C.H. Yoo, H.M. Lee, J.W. Chan, J.W. Morris, Metall. Mater. Trans. A 27A (1996): p. 3,466-3,472.
7. C.J. Kuehmann, "Thermal Processing Optimization of Nickel-Cobalt Ultrahigh-Strength Steels" (Ph.D. diss., Northwestern University, 1994).
8. G.B. Olson, "Science of Steel," in Innovations in Ultra-High Strength Steel Technology, 34th Sagamore Army Materials Conf. (Watertown, MA: U.S. Army Laboratory Command, 1987), p. 3-65.
9. R.P. Gangloff, "Environmentally Assisted Failure," Hydrogen-Assisted Cracking, chapter 6.02, in Comprehensive Structural Integrity, eds. I. Milne, R.O. Ritchie, B. Karihaloo, vol. 6 (New York, NY: Elsevier Science, 2003), p. 31-101.
10. E.U. Lee, H. Sanders, B. Sarkar, "Stress Corrosion Cracking of High Strength Steels," Proc. Tri-Service Conf. on Corrosion, eds. J.V. Kelley, B. Placzankis (Aberdeen, MD: Army Research Laboratory, 2000), CD file S08p2a.pdf.
11. P. Buckley, B. Placzankis, J. Beatty, R. Brown, "Characterization of Hydrogen Embrittlement Behavior of High-Strength Steels for Army Applications," CORROSION/94. paper no. 547 (Houston, TX: NACE International, 1994).
12. P.F. Buckley, R. Brown, G.H. Graves, E.U. Lee, C.E. Neu, J. Kozol, "Corrosion Behavior of High Strength Steels for Aerospace Applications," in Metallic Materials for Lightweight Applications, 40th Sagamore Army Materials Research Conf., eds. M.G.H. Wells, E.B. Kula, J.H. Beatty (Watertown, MA: United States Army Laboratory Command, 1993), p. 377-388.
13. J.B. Boody, V.S. Agarwala, "Hydrogen in Metals: Cadmium Plated Steels," CORROSION/87, paper no. 224 (Houston, TX: NACE, 1987).
14. D.A. Berman, Mater. Perform. 24 (1985): p. 36-41.
15. R.L.S. Thomas, J.R. Scully, R.P. Gangloff, Metall. Mater. Trans. A 34A (2003): p. 327-344.
16. G.N. Vigilante, J.H. Underwood, D. Crayton, "Use of Instrumented Bolt and Constant Displacement Bolt-Loaded Specimens to Measure In Situ Hydrogen Crack Growth in High-Strength Steel," in Fatigue and Fracture Mechanics, Proc. 30th Natl. Symp., ASTM STP 1360 (West Conshohocken, PA: ASTM International, 2000), p. 377-387.
17. E.U. Lee, Metall. Trans. A 26A (1995): p. 1313-6.
18. H.E. Townsend, Corrosion 37, 2 (1981): p. 115-20.
19. ASTM B850-98, "Standard Guide for Post-Coating Treatment of Steel for Reducing Risk of Hydrogen Embrittlement," in Annual Book of ASTM Standards, vol. 02.05 (West Conshohocken, PA: ASTM International, 2001), p. 613-615.
20. M.J. Robinson, R.M. Sharp, Corrosion 41, 10 (1985): p. 582-586.
21. T. Zhong-Zhuo, H. Chi-Mei, L. Rong-Bong, F. Yi-Feng, C. Xiang-Rong, "The Relationship Between Degassing Baking Treatment and Fracture Toughness of Cadmium-Plated High-Strength Steel," in Current Solutions to Hydrogen Problems in Steels, eds. C.G. Interrante, G.M. Pressouyre (Materials Park, OH: ASM International, 1982), p. 98-103.
22. † 100" (MS thesis, University of Virginia, Charlottesville, VA, 2000).
23. E.L. Williams, D.M. Anderson, Mater. Perform. 24, 12 (1985): p. 9-12.
24. W.W. Gerberich, T. Livne, X.-F. Chen, M. Kaczorowski, Metall. Trans. A 19A (1988): p. 1,319-1,334.
25. G.M. Pressouyre, F.M. Faure, "Quantitative Analysis of Critical Concentrations for Hydrogen-Induced Cracking," in Hydrogen Embrittlement: Prevention and Control, ASTM STP 962, ed. L. Raymond (West Conshohocken, PA: ASTM International, 1988), p. 353-71.
26. G.M. Pressouyre, I.M. Bernstein, Metall. Trans. A 9A (1978): p. 1,571-1,580.
27. G.M. Pressouyre, "Trap Theory of Hydrogen Embrittlement: Experimental Investigation," in Hydrogen Effects in Metals, eds. I.M. Bernstein, A.W. Thompson (Warrendale, PA: The Minerals, Metals, and Materials Society, 1981), p. 27-36.
28. K. Yamakawa, S. Yonezawa, S. Yoshizawa, in Int. Cong. on Metallic Corrosion (Toronto, Canada: National Research Council, 1984), p. 254-261.
29. R. P. Gangloff, "A Review and Analysis of the Threshold for Hydrogen Environment Embrittlement of Steel," in Corrosion Prevention and Control, eds. M. Levy, S. Isserow (Watertown, MA: U.S. Army Materials Technology Laboratory, 1986), p. 64-111.
30. M. Nagumo, M. Nakamura, K. Takai, Metall. Mater. Trans. A 32A (2001): p. 339-47.
31. G.M. Pressouyre, I.M. Bernstein, Acta Metall. 27 (1979): p. 89-100.
32. M.F. Stevens, I.M. Bernstein, Metall. Trans. A 16A (1985): p. 1,879-1,886.
33. J.R. Scully, J.A. Van Den Avyle, M.J. Cieslak, A.D. Romig, C.R. Hills, Metall. Trans. A 22A (1991): p. 2,429-2,443.
34. G.M. Pressouyre, Acta Metall. 28 (1980): p. 895-911.
35. N. Suzuki, N. Ishii, T. Miyagawa, Tetsu to Hagane 82, 2 (1996): p. 170-175.
36. D. Li, R.P. Gangloff, J.R. Scully, Metall. Mater. Trans A 35A (2004): p. 849-864.
37. † 100 Alloy, Carpenter Technology Corp., Carpenter Steel Division, Reading, PA, 1992.
38. J.M. Dahl, P.M. Novotny, Adv. Mater. Process. 3 (1999): p. 23-25.
39. J.F. Shackelford, Introduction to Materials Science for Engineers, 5th ed. (Upper Saddle River, NJ: Prentice Hall, 2000), p. 164-8.
40. QQ-P-416F, "Plating, Cadmium (Electrodeposited)," Federal Specification, Naval Air Engineering Center, Systems Engineering and standardization Department, Lakehurst, NJ, April 1986.
41. ASTM B487-85, "Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section," in Annual Book of ASTM Standards, vol. 02.05 (West Conshohocken, PA: ASTM International, 1991), p. 237-240.
42. ASTM B767-88, "Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures," in Annual Book of ASTM Standards, vol. 02.05 (West Conshohocken, PA: ASTM International, 1991), p. 555-560.
43. J.J. DeLucia, D.A. Berman, "An Electrochemical Technique to Measure Diffusible Hydrogen in Metals (Barnacle Electrode)," in Electrochemical Corrosion Testing, ASTM STP 727, eds. F. Mansfeld, U. Bertocci (West Conshohocken, PA: ASTM International, 1981), p. 256-273.
44. R.L.S. Thomas, D. Li, R.P. Gangloff, J.R. Scully, Metall. Mater. Trans. A 33A (2002): p. 1,991-2,003.
45. S.W. Smith, J.R. Scully, Metall. Mater. Trans. A 31A (2000): p. 179-193.
46. J.Y. Lee, J.L. Lee, W.Y. Choo, Current Solutions to Hydrogen Problems in Steels (Materials Park, OH: ASM International, 1982), p. 423-7.
47. H.E. Kissinger, Anal. Chem. 29 (1957): p. 1,702-1,706.
48. R. Ayer, P.M. Machmeier, Metall. Mater. Trans. A 29A (1998): p. 903-905.
49. D.L. Johnson, G. Krauss, J.K. Wu, K.P. Tang, Metall. Trans. A 18A (1987): p. 717-721.
50. R.A. Oriani, "Hydrogen in Metals," in Fundamental Aspects of Stress Corrosion Cracking (Houston, TX: NACE, 1969), p. 32-50.
51. J.P. Hirth, Metall. Trans. A 11A (1980): p. 861-890.
52. W.C. Johnson, J.Y. Huh, Metall. Mater. Trans. A 34A (2003): p. 2,819-2,825.
53. K.N. Akhurst, T.J. Baker, Metall. Trans. A 12A (1981): p. 1,059-1,070.
54. T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, 2nd ed. (Boca Raton, FL: CRC Press, 1995), p. 117-181.
55. Y. Katz, N. Tymiak, W.W. Gerberich, Eng. Fract. Mech. 68 (2001): p. 619-646.
56. X. Chen, W.W. Gerberich, Metall. Trans. A 22A (1991): p. 59-70.
57. Y. Wei, J.W. Hutchinson, J. Mech. Phys. Solids 45 (1997): p. 1,253-1,273.
58. H. Jiang, Y. Huang, Z. Zhuang, K.C. Hwang, J. Mech. Phys. Solids 49 (2001): p. 979-993.
59. T.Y. Zhang, J.E. Hack, Metall. Mater. Trans. A 30A (1999): p. 155-159.
60. T.Y. Zhang, H. Sheu, J.E. Hack, Scr. Metall. Mater. 27 (1992): p. 1,605-1,610.
61. D. Li, R.P. Gangloff, J.R. Scully, "Hydrogen Diffusion and Trapping Behavior in Ultrahigh Strength AerMet® 100 Steel," Technical Report, Charlottesville, VA, University of Virginia, 2002.
62. R. Ayer, P.M. Machmeier, Metall. Trans. 27A (1996): p. 2,510-2,521.
63. R.P. Gangloff, "Diffusion Control of Hydrogen Environment Embrittlement in High Strength Alloys," in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, eds. N.R. Moody, A.W. Thompson, R.E. Ricker, G.S. Was, R.H. Jones (Warrendale, PA: The Minerals, Metals, and Materials Society, 2003), p. E03: 1-21.
64. Y. Lee, "Measurement and Modeling of Hydrogen Environment Assisted Cracking of Ultra-High Strength Steel" (M.S. thesis diss., University of Virginia, May 2007).