Modeling flow in compression resin transfer molding for manufacturing of complex lightweight high-performance automotive parts

Journal of Composite Materials

Volumn 42, Issue 23, 2008, Pages 2523-2545

  Simacek, Pavel ^a   Advani, Suresh G ^b   Iobst, Stanley A ^c  

^a UNIVERSITY OF DELAWARE   (United States)

^b UNIVERSITY OF DELAWARE   (United States)

^c GENERAL MOTORS CORPORATION   (United States)

Author keywords

Fiber compaction; Finite element control volume method; Mold filling; Moving boundary; Net shape manufacturing; Permeability

Indexed keywords

ABS RESINS; AUTOMOBILE PARTS AND EQUIPMENT; AUTOMOTIVE INDUSTRY; CARBON FIBER REINFORCED PLASTICS; COMPACTION; COMPRESSION MOLDING; DATA COMPRESSION; FORMING; MOLDING; MOLDS; RESINS; TRANSFER MOLDING; VEHICLES;

FIBER COMPACTION; FINITE ELEMENT/CONTROL VOLUME METHOD; MOLD FILLING; MOVING BOUNDARY; NET SHAPE MANUFACTURING; PERMEABILITY;

RESIN TRANSFER MOLDING;

EID: 54249109335     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998308096320     Document Type: Article

References (28)

1. Smith, M. and Warren, D. (2004). Research Needs in Predictive Engineering of Advanced Composite Materials, NSF Workshop on Future of Modeling in Composite Molding Processes, Arlington, VA.
2. Adam, H. (1997). Carbon Fibre in Automotive Applications, Materials and Design, 18 (46). 349-355.
3. Denton, D.L. et al. (2000). Development of a Cost-Effective Manufacturing Process for a Composite Pickup Box, presented at the Midwest Advanced Materials and Processing Conferences, September 12-14, Dearborn, MI.
4. Simacek, P. and Advani, S.G. (2005). Simulation Three-Dimensional Flow in Compression Resin Transfer Molding Process, Revue Europeenne des Elements Finis, 14 (6-7). 777-802.
5. Iobst, S.A., Mao, C.H. and Denton, D.L. (2000). Use of Real Time Data Acquisition to Optimize the SRIM Process for a Pickup Truck Box, presented at the Midwest Advanced Materials and Processing Conferences, September 12-14, Dearborn, MI.
6. Hieber, C.A. and Shen, S.F. (1980). A Finite Element/Finite Difference Simulation of the Injection Mold Filling Process, J. Non-Newtonian Fluid Mech., 7: 1-31.
7. Osswald, T.A. and Tucker, C.L. (1988). Boundary Element Simulation of Compression Mold Filling, Polymer Eng. Sci., 28: 413-420.
8. Bruschke, M. and Advani, S.G. (1990). Finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media, Polymer. Composites, 11: 398-405.
9. Lewis, R.W., Usmani, A.S. and Cross, J.T. (1991). Finite Element Modeling of Mold Filling. Finite Elements in the 90's, Onate, E., Periaux, J. and Samuelsson, A. (eds.), Springer-Verlag / CIMNE, Barcelona.
10. Voller, V.R. and Chen, Y.F. (1996). Prediction of Filling Times of Porous Cavities, International Journal Numerical Methods, 10: 661-672.
11. Ngo, N.G., Mohan, R.V., Chung, P.W. and Tamma, K.K. (1998). Recent Developments Encompassing Non-Isothermal/Isothermal Liquid Composite Molding Process Modeling/ Analysis: Physically Accurate, Computationally Effective, and Affordable Simulations and Validations, Journal of Thermoplastic Composite Materials, 6: 493-532.
12. Trochu, F., Gauvin, R. and Gao, D.-M. (1993). Numerical Analysis of the Resin Transfer Molding Process by the Finite Element Method, Advances in Polymer Technology, 12 (4). 329-342.
13. Phelan, F.R. Jr. (1997). Simulation of the Injection Process in Resin Transfer Molding Process, Polymer Composites, 18: 460-476.
14. Simacek, P. and Advani, S.G. (2004). Desirable Features in Mold Filling Simulations for Liquid Molding Processes, Polymer Composites, 25: 355-367.
15. Bickerton, S., Sozer, E.M., Simacek, P. and Advani, S.G. (2000). Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in the RTM Process. Part II. Predictions and Comparisons with Experiments, Composites - Part A: Applied Science and Manufacturing, 31 (5). 439-458.
16. Mathur, R., Fink, B.K. and Advani, S.G. (1999). Use of Genetic Algorithms to Optimize Gate and Vent Locations for the Resin Transfer Molding Process, Polymer Composites, 2: 167-178.
17. Minaie, B., Chen, Y.F. and Mescher, M.A. (2002). A Methodology to Obtaina Desired Pattern During Resin Transfer Molding, Journal of Composite Material, 14: 1677-1692.
18. Nielsen, D.R. and Pitchumani, R. (2002). Closed-loop Flow Control in Resin Transfer Molding Using Real-time Numerical Process Simulation, Composite Science and Technology, 2: 283-298.
19. Sozer, E.M., Bickerton, S. and Advani, S.G. (2000). Use of Sensors and Simulations for Strategic Control of Liquid Composite Mold Filling Process, SME Technical Paper, Composite Manufacturing and Tooling 2000.
20. Correia, N.C., Robitaille, F., Long, A.C., Rudd, C.D., Simacek, P. and Advani, S.G. (2004). Use of Resin Transfer Molding Simulation to Predict Flow, Saturation and Compaction in the Vartm Process, Journal of Fluids Engineering, 126 (3). 1-6.
21. Modi, D., Simacek, P. and Advani, S.G. (2002). Numerical Issues in Mold Filling Simulations of Liquid Composites Processing, Proceedings of 10th US-Japan Conference on Composite Materials, Stanford University, Stanford, California.
22. Simacek, P. and Advani, S.G. (2003). A Numerical Model to Predict Fiber Tow Saturation During Liquid Composite Molding, Composites Science and Technology, 63 (12). 1725.
23. Simacek, P. and Advani, S.G. (2005). Simulating Three-Dimensional Flow in Compression Resin Transfer Molding Process, Revue Europeenne des Elements Finis, 14 (6-7). 777-802.
24. Shojaei, A. (2006). Numerical Simulation of Three-Dimensional Flow and Analysis of Filling Process in Compression Resin Transfer Moulding Next Term, Composites Part A: Applied Science and Manufacturing, 37 (9). 1434-1450.
25. Dahl, J., DeBolt, M. and Steenkamer, D. (2003). Processing and Performance of Chopped Glass Fiber Reinforced RTM Composites, 14th International Conference on Composite Materials, ICCM, July 14-18, San Diego.
26. Boeman, R. and Johnson, N. (2002). Development of a Cost Competitive, Composite Intensive, Body-in-White, SAE-2002-01-1905, presented at the Future Car Congress, June 3-5, Arlington, VA.
27. Iobst, S.A. et al. (2005). The ACC B-Pillar Molding Program, presented at the SPE Automotive Conference, September 12-14, Troy, MI.
28. Nedanov, P.B. and Advani, S.G. (2002). A Method to Determine 3D Permeability of Fibrous Reinforcements, Journal of Composite Materials, 36 (2). 241-254.