Combined effects of shear thinning and viscous heating on EHL characteristics of rolling/sliding line contacts

Journal of Tribology

Volumn 130, Issue 4, 2008, Pages

  Kumar, Punit ^a   Khonsari, M M ^a  

^a LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

Carreau; EHL; Shear thinning; Thermal effect

Indexed keywords

CANTILEVER BEAMS; FLUID DYNAMICS; FORECASTING; FRICTION; HEATING; MAGNETIC FILMS; MOLECULAR BEAM EPITAXY; NON NEWTONIAN FLOW; SHEAR FLOW; THERMAL EFFECTS; THERMOGRAPHY (TEMPERATURE MEASUREMENT);

CARREAU; CARREAU EQUATIONS; COMBINED EFFECTS; EHL; EHL FILM THICKNESSES; FRICTION COEFFICIENTS; LINE CONTACTS; NEWTONIAN FLUID MODELS; NUMERICAL SIMULATIONS; PARAMETRIC SIMULATIONS; SHEAR THINNING; VISCOUS HEATING;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 54149115352     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.2959111     Document Type: Article

References (46)

1. Cheng, H. S., 1965, "A Refined Solution to The Thermal Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders," ASLE Trans., 8(4), pp. 397-410.
2. Dong, Z., and Wen, S., 1994, "A Full Numerical Solution for the Thermoelastohydrodynamic Problem in Elliptical Contacts," ASME J. Tribol., 106, pp. 246-254.
3. Eltrod, H. G., and Brewe, D. E., 1983, "Thermohydrodynamic Analysis for Laminar Lubricating Films," NASA Technical Memorandum 88845.
4. Ghosh, M. K., and Hamrock, B. J., 1985, "Thermal Elastohydrodynamic Lubrication of Line Contacts," ASLE Trans., 28(2), pp. 159-171.
5. Murch, L. E., and Wilson, W. R. D., 1975, "Thermal Elastohydrodynamic Inlet Zone Analysis," ASME J. Lubr. Technol., 97, pp. 212-216.
6. Kaludjercic, A., Ettles, C. M. M., and Macpherson, P. B., 1980, "Thermo-Elastohydrodynamic Effects in Lubricated Line Contacts," Westland Helicopter Ltd., Research Paper 620.
7. Wilson, W. R. D., and Shen, S., 1983, "Effect of Inlet Shear Heating Due to Sliding on Elastohydrodynamic Film Thickness," ASME J. Lubr. Technol., 105, pp. 187-188.
8. Sadeghi, F., and Dow, T. A., 1987, "Thermal Effects in Rolling /Sliding Contacts, Part 2 - Analysis of Thermal Effects in Fluid Film," ASME J. Tribol., 109, pp. 512-518.
9. Sadeghi, F., Dow, T. A., and Johnson, R. R., 1997, "Thermal Effects in Rolling/Sliding Contacts, Part 3: Approximate Method for Prediction of Mid-Film Temperature and Sliding Traction," ASME J. Tribol., 109, pp. 519-524.
10. Hsu, C. H., and Lee, R. T., 1994, "An Efficient Algorithm for Thermal Elastohydrodynamic Lubrication Under Rolling/Sliding Line Contacts," ASME J. Tribol., 116, pp. 762-769.
11. Lee, R. T., and Hsu, C. H., 1993, "A Fast Method for the Analysis of Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Line Contacts," Wear, 106, pp. 107-117.
12. Pandey, R. K., and Ghosh, M. K., 1998, "Temperature Rise Due to Sliding in Rolling/Sliding Elastohydrodynamic Lubrication Line Contacts - An Efficient Numerical Analysis for Contact Zone Temperatures," Tribol. Int., 13, pp. 745-752.
13. Sadeghi, F., and Sui, P. C., 1990, "Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Contacts," ASME J. Tribol., 112, pp. 189-195.
14. Wolff, R., and Kubo, A., 1994, "The Application of Newton-Raphson Method to Thermal Elastohydrodynamic Lubrication of Line Contacts," ASME J. Tribol., 116, pp. 733-740.
15. Ree, T., and Eyring, H., 1954, "Theory of Non-Newtonian Flow, I., Solid Plastic Systems; II., Solution Systems of High Polymers," J. Appl. Phys., 26(7), pp. 793-809.
16. Hirst, W., and Moore, A. J., 1974, "Non-Newtonian Behavior in Elastohydrodynamic Lubrication," Proc. R. Soc. London, Ser. A, 337, pp. 101-121.
17. Johnson, K. L., and Tevaarwerk, J. L., 1977, "Shear behaviour of EHD Oil Films," Proc. R. Soc. London, Set. A, 356, pp. 215-236.
18. Berthe, D., Houpert, L., and Flamand, L., 1979, "Thermal Effects in EHD Contacts for Different Rheological Behaviors of the Lubricant," Thermal Effects in Tribology, Proceedings of the sixth Leeds-Lyon Symposium on Tribology, Lyon, France, D. Dowson et al., eds., Mechanical Engineering, London, pp. 241-249.
19. Johnson, K. L., and Greenwood, J. A., 1980, "Thermal Analysis of an Eyring Fluid in EHD Traction," Wear, 61, pp. 353-374.
20. Houpert, L. G., and Hamrock, B. J., 1985, "Elastohydrodynamic Lubrication Calculations Used as a Tool to Study Scuffling," Proceedings of 12th Leeds-Lyon Symposium on Tribology, Tribology Series, Elsevier, Amsterdam, pp. 146-155.
21. Conry, T. F., Wang, S., and Cusano, C., 1987, "A Reynolds-Eyring Equation for Elastohydrodynamic Lubrication in Line Contacts," ASME J. Tribol., 107, pp. 648-658.
22. Chang, L., Cusano, C., and Conry, T. F., 1988, "Effects of Lubricant Rheology and Kinematic Conditions Micro-Elastohydrodynamic Lubrication," ASME J. Tribol., 111, pp. 344-351.
23. Evans, C. R., and Johnson, K. L., 1986, "The Rheological Properties of Elastohydrodynamic Lubrication," Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci., 200(C5), pp. 301-312.
24. Bair, S., and Winer, W. O., 1979, "A Rheological Model for Elastohydrodynamic Contacts Based in Primary Laboratory Data," ASME J. Lubr. Technol., 101(3), pp. 258-265.
25. Gecim, B., and Winer, W. O., 1980, "Lubricant Limiting Shear Stress Effect on EHD Film Thickness," ASME J. Lubr. Technol., 102, pp. 213-219.
26. Jacobson, B. O., and Hanrock, B. J., 1984, "Non-Newtonian Fluid Model Incorporated into Elastohydrodynamic Lubrication of Rectangular Contacts," ASME J. Tribol., 106, pp. 275-284.
27. Lee, R. T., and Hanrock, B. J., 1990, "A Circular Non-Newtonian Fluid Model: Part I-Used in Elastohydrodynamic Lubrication," ASME J. Tribol., 112, pp. 486-496.
28. Sui, P. C., and Sadeghi, F., 1991, "Non-Newtonian Thermal Elastohydrodynamic Lubrication," ASME J. Tribol., 113, pp. 390-397.
29. Salehizadeh, H., and Saka, N., 1991, "Thermal Non-Newtonian Elastohydrodynamic Lubrication of Rolling Line Contacts," ASME J. Tribol., 113, pp. 181-191.
30. Wang, S., Conry, T. F., and Cusano, C., 1992, "Thermal Non-Newtonian Elastohydrodynamic Lubrication of Line Contacts Under Simple Sliding Conditions," ASME J. Tribol., 114, pp. 317-327.
31. Kumar, P., Jain, S. C., and Ray, S., 2002, "Thermal EHL of Rough Rolling/Sliding Line Contacts Using a Mixture of Two Fluids at Dynamic Loads," ASME J. Tribol., 124, pp. 709-715.
32. Hsiao, H. S., and Hamrock, B. I., 1992, "A Complete Solution for Thermal Elastohydrodynamic Lubrication of Line Contacts Using Circular Non-Newtonian Fluid Model," ASME J. Tribol., 114, pp. 540-552.
33. Khonsari, M., and Hua, D., 1994, "Generalized Non-Newtonian Elastohydrodynamic Lubrication," Tribol. Int., 26, pp. 405-411.
34. Khonsari, M., and Hua, D., 1994, "Thermal Elastohydrodynamic Analysis Using a Generalized Non-Newtonian With Application to Bair-Winer Constitutive Equation," ASME J. Tribol., 116, pp. 37-46.
35. Bair, S., and Qureshi, F., 2003, "The Generalized Newtonian Fluid Model and Elastohydrodynamic Film Thickness," ASME J. Tribol., 125, pp. 70-75.
36. Mongkolwongrojn, M., Wongseedakeaw, K., Yawong, S., Jeenkour, P., and Aiumpornsin, C., 2005, "Effect of Model Parameters on Elastohydrodynamic Lubrication Line Contact With Non-Newtonian Carreau Viscosity Model," Int. J. Appl. Mech. Eng., 10, pp. 263-268.
37. Jang, J. Y., Khonsari, M. M., Bair, S., 2007, "On the Elastohydrodynamic Analysis of Shear-Thinning Fluids," Proc. R. Soc. London, Ser. A, 463, pp. 3271-3290.
38. Bair, S., 2004, "Actual Eyring Models for Thixotropy and Shear-Thinning: Experimental Validation and Application to EHD," ASME J. Tribol., 126, pp. 728-732.
39. Chapkov, A. D., Bair, S., Cann, P., and Lubrecht, A. A., 2007, "Film Thickness in Point Contacts Under Generalized Newtonian EHL Conditions: Numerical and Experimental Analysis," Farbe, 40, pp. 1474-1478.
40. Liu, Y., Wang, Q. J., Bair, S., and Vergne, P., 2007, "A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction," Tribol. Lett., 28(2), pp. 171-181.
41. Tanner, R. I., 2000, Engineering Rheology, 2nd ed., Oxford University Press, Oxford, pp. 122-124.
42. Bird, R. B., Armstrong, R. C., and Hassager, O., 1987, Dynamics of Polymeric Liquids (Kinetic Theory), 2nd ed., Wiley, New York, Vol. 2, pp. 111-150.
43. Kioupis, L. I., and Maginn, E. J., 1999, "Molecular Simulation of Poly-Alpha-Olefin Synthetic Lubricants: Impact of Molecular Architecture on Performance Properties," J. Phys. Chem. B, 103, pp. 10781-10790.
44. Dowson, D., 1962, "A Generalized Reynolds Equation for Fluid Film Lubrication," Int. J. Mech. Sci., 4, pp. 159-170.
45. Bair, S., 2007, High Pressure Rheology for Quantitative Elastohydrodynamics (Tribology and Interface Engineering Series), 54, Elsevier Press, Amsterdam, Netherlands.
46. Dyson, A., and Wilson, A. R., 1965-66, "Film Thickness in Elastohydrodynamic Lubrication by Silicone Fluids," Proc. Inst. Mech. Eng., Part K: J. Multi-Body Dynamics, 180, pp. 97-105.