Control issues in adjustable speed drives

IEEE Industrial Electronics Magazine

Volumn 2, Issue 3, 2008, Pages 32-50

  Boldea, Ion ^a  

^a NONE

Author keywords

Converters; Electric machines; Generators; Reluctance motors; Rotors; Torque; Variable speed drives

Indexed keywords

AC GENERATORS; AC MOTORS; ASYNCHRONOUS MACHINERY; AUTOMOBILE ELECTRONIC EQUIPMENT; AUTOMOBILE PARTS AND EQUIPMENT; CUSTOMER SATISFACTION; DIGITAL ARITHMETIC; DIGITAL DEVICES; DOMESTIC APPLIANCES; DRIVES; ELECTRIC GENERATORS; ELECTRIC MACHINERY; ELECTRIC TOOLS; MACHINE DESIGN; MOTORS; POWER ELECTRONICS; POWER QUALITY; QUALITY ASSURANCE; QUALITY CONTROL; QUALITY FUNCTION DEPLOYMENT; RELUCTANCE MOTORS; RENEWABLE ENERGY RESOURCES; SENSOR NETWORKS; SPEED; TORQUE CONTROL; TORQUE CONVERTERS; TOTAL QUALITY MANAGEMENT; VARIABLE SPEED DRIVES;

AC DRIVES; AC MOTOR CONTROLS; ADJUSTABLE SPEED DRIVES; AUTOMOTIVE; CONSTANT POWERS; CONTROL ISSUES; CONVERTERS; CURRENT SENSORLESS; DIGITAL HOME APPLIANCES; DIGITAL INFORMATIONS; DIRECT TORQUE CONTROLS; ELECTRIC ACTUATORS; ELECTRIC ENERGIES; ELECTRIC MACHINES; FIELD ORIENTATIONS; GENERATOR CONTROLS; GENERATORS; INDUSTRIAL DEVELOPMENTS; INDUSTRIAL PROCESSES; LINEAR MOTOR DRIVES; MODELING TOOLS; PERFORMANCE INDICES; POWER LEVELS; POWER QUALITY CONTROLS; RECENT PROGRESSES; RENEWABLE ENERGY SYSTEMS; SENSORLESS CONTROLS; STATE OBSERVERS; THREE-PHASE; WORK PROCESSES;

ELECTRIC DRIVES;

EID: 54049086203     PISSN: 19324529     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIE.2008.928605     Document Type: Article

References (63)

1. S. Bolognani, N. Bianchi, and M. Zigliotto, "New perspective motors in adjustable drives," EPE J., vol. 14, no. 1, pp. 6-11, 2004.
2. J. Holtz, "Sensorless control of induction machines with and without signal injection," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 7-30, 2006.
3. J.W. Finch and D. Giaouris, "Controlled ac electrical drives," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 481-491, 2008.
4. P. Vas, Sensorless Vector and Direct Torque Control. London, UK: Oxford Univ. Press, 1998.
5. I. Boldea and S.A. Nasar, Electric Drives. 2nd ed. New York: Taylor & Francis, 2006.
6. B. Bose, "Neural network applications in power electronics and motor drives. An introduction and perspective," IEEE Trans. Ind. Electron. vol. 54, no. 1, pp. 14-33, 2007.
7. R. Ueda, T. Sonoda, K. Koga, and M. Ichikawa, "Stability analysis in induction motor driven by V/f controlled general-purpose inverter," IEEE Trans. Ind. Electron., vol. 28, no. 2, pp.472-481, 1992.
8. K. Koga, R. Ueda, and T. Sonoda, "Constitution of V/f control for reducing the steady-state speed error to zero in induction motor drive system," IEEE Trans. Ind. Electron., vol. 28, no. 2, pp. 463-471, 1992.
9. L. Zhao, C. Ham, L. Zheng, T. Wu, K. Sundaram, J. Kapat, and L. Chow, "A highly efficient 200,000 RPM permanent magnet motor system," IEEE Trans. Magn., vol. 43, no. 6, pp. 2528-2530, 2007.
10. C. Zwyssig, S.D. Round, and J.W. Kallar, "An ultrahigh-speed low power electric drive system," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 577-585, 2008.
11. F. Blaschke, "The principle of field orientation as applied to a new transvector closed-loop control system for rotating field machines," Siemens Rev., vol. 34, pp. 217-220, 1972.
12. I. Takahashi and T. Noguchi, "A new quick response and high efficiency control strategy of an induction machine," Record of IEEE-IAS 1985 pp. 496-502.
13. M. Depenbrock, "Direct self-control (DSC) of inverter-fed induction machine," IEEE Trans. Power Electron., vol. 3, no. 4, pp. 420-429, 1988.
14. I. Boldea and S.A. Nasar, "Torque vector control (TVC): A class of fast and robust torque speed and position digital controllers for electric drives," EMPS J., vol. 15, pp. 135-139, 1988.
15. M. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Eds., Control in Power Electronics: Selected Problems. New York: Academic, 2002.
16. D. Novotny and T.A. Lipo, Vector Control and Dynamics of AC Drives New York: Oxford Univ. Press, 1996.
17. R. Khrishnan, Electric Motor Drives. Englewood Cliffs, NJ: Prentice Hall, 2001.
18. C. Lascu, I. Boldea, and F. Blaabjerg, "Variable structure direct torque control: A class of fast and robust controllers for IM drives," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 785-792, 2004.
19. M. Pacas and J. Weber, "Predictive direct torque control for the PM synchronous machine," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1350-1356, 2005.
20. D. Casadei, F. Profumo, G. Serra, and A. Tani, "FOC and DTC: Two viable schemes for induction motors torque control," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 779-787, 2002.
21. T.A. Jahns, "Component rating requirements for wide constant power operation of IPMSM drives," in Record IEEE-IAS Conf., 2000, pp. 1460-1463.
22. W.L. Soong, N. Ertugrul, E.C. Lovelace, and T. M. Jahns, "Investigation of IPM offset-coupled automotive integrated starter/alternator," in Record IEEE-IAS Conf., 2001, pp. 429-436.
23. E.C. Lovelace, T. Jahns, T. Klein, J. Lang, D. Wentzhoff, F. Leonardi, J. Miller, and P. McCleer, "Design and experimental verification of a direct drive IPMSM using a saturable lumped-parameter model," in Record IEEE-IAS Conf., 2002.
24. R. Krishnan, "Review of flux weakening in high performance vector controlled IM drives," in Record IEEE-ISIE Conf., vol. 2, 1996, pp. 917-922.
25. H. Grotstollen and A. Bünte, "Control of induction motor with orientation on rotor flux or stator flux in a very wide field weakening region - Experimental results," in Record IEEE-ISIE Conf., 1996, vol. 2, pp. 911-916.
26. H.A. Rub, H. Schmirgel, and J. Holtz, "Sensorless control of IMs for maximum steady state and fast dynamics at field weakening," in Record IEEE-IAS Conf., 2006.
27. A. Vagati, A. Fratta, P. Guglielmi, G. Franchi, and F. Villata, "Comparisons of ac motor based drives for electric vehicle applications," in Record PCIM Europe Conf., 1999, vol. IM-1999, pp. 173-181.
28. K. Rajashekara, A. Kawamura, and K. Matsuse, Sensorless Control of AC Drives. New York: IEEE Press, 1996.
29. H. Gutierrez and P.I. Ro, "Magnetic servolimitation by sliding-mode control of nonaffine systems with algebraic input inheritability," IEEE Trans. Energy Conversion, vol. 52, no. 5, pp. 1449-1455, 2006.
30. J. Holtz, "Sensorless position control of induction motors: An emerging technology," IEEE Trans. Ind. Electron., vol. 45, no. 6, pp. 840-852, 1998.
31. F. Briz, M.W. Degner, A. Diez, and R.D. Lorenz, "Static and dynamic behavior of saturation-induced saliencies and their effect on carrier-signal-based sensorless AC drives," IEEE Trans. Ind. Applicat., vol. 38, no. 3, pp. 670-678, 2002.
32. N. Teske, G.M. Asher, M. Sumner, and K.J. Bradley, "Suppression of saturation saliency effects for the sensorless position control of induction motor drives under loaded conditions," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1142-1150, 2000.
33. A. Consili, G. Scarsella, and A. Testa, "Using the IM as a flux sensor: New control perspectives for zero speed operation of standard drives," IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 1052-1061, 2003.
34. S. Shinnaka, "New mirror-phase vector control for sensorless drive of PMSM with pole saliency," IEEE Trans. Ind. Applicat., vol. 40, no. 2, pp. 599-606, 2004.
35. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of SMs using carrier-signal injection," in Record IEEE-IEMDC, 2003, vol. 2, pp. 1211-1217, 2003.
36. I. Boldea, C.I. Pitic, C. Lascu, G. D. Andreescu, L. Tutelea, F. Blaabjerg, and P. Sandholdt, "DT-FC-SVM motion sensorless control of a PM-assisted RSM as starter-alternator for HEV," IEEE Trans. Power Electron., vol. 21, no. 3, pp. 711-719, 2006.
37. C.I. Pitic, G.D. Andreescu, F. Blaabjerg, and I. Boldea, "IPMSM motion sensorless direct torque and flux control," in Record IEEE-IECON, 2005.
38. M. Schroedl, "Sensorless control of ac machines at low speed and standstill based on the INFORM method," in Record IEEE-IAS Conf., 1996, vol. 1, pp. 270-277.
39. B. Britz, M. Degner, P. Garcia, and R.D. Lorenz, "Comparison of saliency based sensorless control techniques for ac machines," IEEE Trans. Ind. Applicat., vol. 40, no. 4, pp. 1107-1115, 2004.
40. E. Robeischl and M. Schroedel, "Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion," IEEE Trans. Ind. Applicat., vol. 40, no. 2, pp. 591-598, 2004.
41. J. Holtz and H. Pan, "Elimination of saturation effects in sensorless position-controlled induction motors," IEEE Trans. Ind. Applicat. vol. 40, no. 2, pp. 623-631, 2004.
42. T. Noguchi, K. Yamada, S. Kondo, and I. Takahashi, "Initial rotor position estimation of sensorless PMSM with no sensitivity to armature resistance," IEEE Trans. Ind. Electron., vol. 45, no. 1, pp. 118-125, 1998.
43. H. Kim, K.K. Huh, R.D. Lorenz, and T.M. Jahns, "A novel method for initial rotor position estimation in IPMSM drives," IEEE Trans. Ind. Applicat., vol. 40, no. 5, pp. 1369-1378, 2004.
44. J. Holtz, "Initial rotor position polarity detection and sensorless control of PMSMs," in Record IEEE-IAS Conf., 2006.
45. C. Lascu, I. Boldea, and F. Blaabjerg, "Comparison study of adaptive and inherently sensorless observers for variable speed IM drives," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 57-65, 2005.
46. H. Wang, S. Pekarek, and B. Fahimi, "Elimination of position and current sensors in high performance adjustable speed ac drives," in Record IEEE-IEMDC Conf., pp. 1902-2005, 1911.
47. S. Chakrabarti, T. M. Jahns, and R.D. Lorenz, "A current control technique for induction machine drives using integrated current sensors in the low side switches," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 272-281, 2007.
48. A. Piipo, M. Hinkkanen, and J. Luomi, "Analysis of an adaptive observer for sensorless control of IPMSM," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 570-577, 2008.
49. I. Boldea, Electric Generators Handbook-Part 2: Variable Speed Generators. New York: Taylor & Francis, 2005.
50. J. Wang, W. Wang, G.W. Jewell, and D. Howe, "Design of miniature PM generator and energy storage system," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1383-1390, 2005.
51. T. Kawabara, A. Shibuya, H. Furata, E. Kita, and K. Mitsuhasi, "Design and dynamic response characteristics of 400 MW adjustable speed pump storage built for Ohkawachi Power Station," IEEE Trans. Energy Conversion, vol. 11, no. 5, pp. 376-384, 1998.
52. L. Mosel, H. Goofgroid, H. Mirzgaiam, and J. M. Kaufmann, "Double fed IM: Converter optimization and field oriented control without position sensor," in Proc. IEEE EPA Conf., 1998, vol. 145, no. 4, pp. 360-368.
53. S. Muller, M. Deicke, and R.W. De Doncker, "Adjustable speed generators for wind turbine based on doubly-fed induction machines and 4-quadrant IGBT converters linked to the rotor," in Record IEEE-IAS Conf., 2000, pp. 2249-2254, 2000.
54. I. Serban, G.D. Andreescu, L. Tutelea, C. Lascu, F. Blaabjerg, and I. Boldea, "New state observers and sensorless control of WRIG at power grid with experimental characterization," in Record IEEE-IECON Conf. Paris, France, 2006, pp. 4260-4265.
55. M. Fatu, C. Lascu, G.D. Andreescu, R. Teodorescu, F. Blaabjerg, and I. Boldea, "Voltage sags ridethrough of motion-sensorless controlled PMSG for wind turbines," in Record IEEE-IAS Conf., 2007.
56. I. Boldea and S.A. Nasar, Linear Motion Electromagnetic Devices. New York: Taylor & Francis, 2001.
57. J.F. Gieras, Linear Induction Drives. New York: Oxford Univ. Press, 1994.
58. J.F. Gieras and Z.J. Piech, Linear Synchronous Motors: Transportation and Automation Systems. Boca Raton, FL: CRC Press, 2000.
59. F. Ibrahim, J. Wang, and D. Howe, "Analysis of short stroke single-phase tubular PM actuator for reciprocating compressor," in Record LDIA Conf., Lille, France, 2007.
60. R. Leidhold and P. Mutschler,"Speed sensorless control of a long stator linear synchronous motor arranged in multiple segments," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3246-3254, 2007.
61. H.S. Leid, R. Krishnan, and N.S. Lobs, "Design and control of a linear propulsion system for an elevator using SRM drives," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 534-542, 2008.
62. C. Bernez, H.B. Ahmed, M. Gabsi, and M. Lecrivain, "The limit potential of linear actuators in valves propulsion," in Record of LDIA Conf. Lille, France, 2007.
63. I. Boldea, S. Agarlita, L. Tutelea, and F. Marignetti, "Novel linear PM valve actuator: FE design and dynamic model," in Record LDIA Conf. Lille, France, 2007.