A micromechanical model for predicting combined damage of particles and interface debonding in PBX explosives

Mechanics of Materials

Volumn 41, Issue 1, 2009, Pages 27-47

  Yan Qing, Wu ^a   Feng Lei, Huang ^a  

^a BEIJING INSTITUTE OF TECHNOLOGY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; AGGLOMERATION; CARBON FIBER REINFORCED PLASTICS; COMPOSITE MICROMECHANICS; CONCRETES; CONTINUUM MECHANICS; DATA COMPRESSION; DEBONDING; EXPLOSIVES; FINITE ELEMENT METHOD; LARGE SCALE SYSTEMS; MICROMECHANICS; NITRATION; POLYMER MATRIX COMPOSITES; STRESS-STRAIN CURVES;

AGGREGATE MODEL; COHESIVE LAW; COMPOSITE SYSTEMS; CONTINUUM DAMAGE MODEL; CRACKING PATH; DAMAGE MODELLING; ENERGETIC MATERIALS; FINITE ELEMENT CODE; FRACTURE PATH; FRACTURE PROCESSES; INTERFACE DE-BONDING; LOADING DIRECTION; MECHANICAL RESPONSES; MICRO-MECHANICAL MODELING; PBX EXPLOSIVE; PETERSON; PLASTIC-BONDED EXPLOSIVES; POLYMER BINDERS; QUASI-STATIC; RATE-DEPENDENCE; STRAIN-RATE COMPRESSION; STRESS-STRAIN; UNIAXIAL TENSIONS; VISCOELASTIC COHESIVE;

STRAIN RATE;

EID: 53949115268     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2008.07.005     Document Type: Article

References (63)

1. ABAQUS/Standard 6.4. Theory Manual 4.5.1. 'An Inelastic Constitutive Model for Concrete'.
2. Allen D.H., and Searcy C.R. A micromechanical model for a viscoelastic cohesive zone. Int. J. Fract. 107 2 (2001) 159-176
3. Armstrong R.W., Ammon H.L., Elban W.L., and Tsai D.H. Investigation of hot spot characteristics in energetic crystals. Thermochim. Acta 384 1-2 (2002) 303-313
4. Awaji H., and Sennosuke S. Diametral compressive testing method. J. Eng. Mater. Tech. 101 (1979) 139-147
5. Baer M.R. Modeling heterogeneous energetic materials at the mesoscale. Thermochim. Acta 384 1-2 (2002) 351-367
6. Bardenhagen S.G., and Brackbill J.U. Shear deformation in granular material. In: Short J.M., and Kennedy J.E. (Eds). 11th International Detonation Symposium (1998), Snowmass Village, Colorado 547-555
7. Barenblatt G.I. The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7 (1962) 55-129
8. Bažant Z.P., and Li Y.N. Cohesive crack with rate-dependent opening and viscoelasticity I. Mathematical model and scaling. Int. J. Fract. 86 3 (1997) 247-265
9. Bennett J.G., Haberman K.S., Johnson J.N., Asay B.W., and Henson B.F. A constitutive model for the non-shock ignition and mechanical response of high explosive. J. Mech. Phys. Solids 46 12 (1998) 2303-2322
10. Bosch Van den M.J., Scireurs P.J.G., and Geers M.G.D. A cohesive zone model with a large displacement formulation accounting for interfacial fibrillation. Eur. J. Mech. - A/Solids 26 1 (2007) 1-19
11. Cady C.M., Blumenthal W.R., Gray III G.T., and Idar D.J. Mechanical properties of plastic-bonded explosive binder materials as a function of strain-rate and temperature. Polym. Eng. Sci. 46 6 (2006) 812-819
12. Chandra N., Li H., Shet C., and Ghonem H. Some issues in the application of cohesive zone models for metal-ceramic interfaces. Int. J. Solids Struct. 39 10 (2002) 2827-2855
13. Clancy S.P., Johnson J.N., and Burkett M.W. Modeling the viscoelastic and brittle fracture response of a high explosive in an Eulerian hydrocode. In: Short J.M., and Kennedy J.E. (Eds). Proceedings of the 11th Detonation Symposium (1998), Snowmass Village, Colorado
14. Clayton J.D., and McDowell D.L. Finite polycrystalline elastoplasticity and damage: multiscale kinematics. Int. J. Solids Struct. 40 21 (2003) 5669-5688
15. Clayton J.D. Dynamic plasticity and fracture in high density polycrystals: constitutive modelling and numerical simulation. J. Mech. Phys. Solids 53 (2005) 261-301
16. Clements B.E., and Mas E.M. A theory for plastic-bonded materials with a bimodal size distribution of filler particles. Model. Simul. Mater. Sci. Eng. 12 3 (2004) 407-421
17. Dick, J.J., Martinez, A.R., Hixson, R.X., 1998. Plane impact response of PBX 9501 and its components below 2GPa. Los Alamos National Laboratory. LA-13426-MS.
18. Dienes J.K., Zuo Q.H., and Kershner J.D. Impact initiation of explosives and propellants via statistical crack mechanics. J. Mech. Phys. Solids 54 6 (2006) 1237-1275
19. Dienes, J.K., 1978. A statistical theory of fragmentation. In: Kim, Y.S. (Ed.), Proceedings of 19th US Rock Mechanics Symposium. University of Nevada, pp. 51-55.
20. Dienes J.K. A statistics theory of fragmentation processes. Mech. Mater. 4 3 (1985) 325-335
21. Dienes J.K. A unified theory of flow, hot spots, and fragmentation with an application to explosive sensitivity. In: Davison L., Grady D.E., and Shahinpoor M. (Eds). High Pressure Shock Compression of Solids II (1996), Springer, New York 366-398
22. Dienes, J.K., Kershneer, J.D., 1998. Multiple-shock initiation via statistical crack mechanics. In: Short, J.M., Kennedy, J.E. (Eds.) Proceedings of the 11th Detonation Symposium, pp. 717-724.
23. Dugdale D.S. Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8 2 (1960) 100-104
24. Espinosa H.D., Zavattieri P.D., and Dwivedi S.K. A finite deformation continuum/discrete model for the description of fragmentation and damage in brittle materials. J. Mech. Phys. Solids 46 1 (1998) 1909-1942
25. Gray III G.T., Ida D.J., Blumenthal W.R., Cady C.M., and Peterson P.D. High- and low-strain rate compression properties of several energetic material composites as a function of strain rate and temperature. Proceedings of the 11th Detonation Symposium (1998), Snowmass Village, Colorado
26. Johnson, H.D., 1981. Diametric disc and standard tensile-test correlation study. MHSMP-81-22.
27. Kauly, T., Kimmel, T., 1998. Failure mechanism in PBX. In: Proceedings of the Energetic Materials. 29th International Annual Conference of ICT, Karlsruhe, Germany.
28. Kim Y.R., Allen D.H., and Seidel G.D. Damage-induced modeling of elastic-viscoelastic randomly oriented particulate composites. J. Eng. Mater. Tech. 128 1 (2006) 18-27
29. Kraft R.H., Molinari J.F., Ramesh K.T., and Warner D.H. Computational micromechanics of dynamic compressive loading of a brittle polycrystalline material using a distribution of grain boundary properties. J. Mech. Phys. Solids 56 (2008) 2618-2641
30. Li Y.N., and Bažant Z.P. Cohesive crack model with rate-dependent opening and viscoelasticity: II. Numerical algorithm, behavior and size effect. Int. J. Fract. 86 3 (1997) 267-288
31. Mas, E.M., Clements, B.E., 2002. A viscoelastic model for PBX binders. In: Furnish, M.D., Thadhani, N.N. (Eds.), Shock compression of condensed matter-2001, pp. 661-664.
32. Menikoff, R., Dick, J.J., Hooks, D.E., 2004. Analysis of wave profiles for single crystal HMX. Los Alamos National Laboratory. LA-UR-04-3928.
33. Menikoff R., and Thomas D.S. Constituent properties of HMX needed for mesoscale simulations. Combust. Theor. Model. 6 1 (2002) 103-125
34. Moreo P., Garcia-Aznar J.M., and Doblare M. A coupled viscoplastic rate-dependent damage model for the simulation of fatigue failure of cement-bone interfaces. Int. J. Plast. 23 12 (2007) 2058-2084
35. Needleman A. A continuum model for void nucleation by inclusion debonding. J. Appl. Mech. 54 3 (1987) 525-531
36. Needleman A. An analysis of decohesion along an imperfect interface. Int. J. Fract. 42 (1990) 21-40
37. Ortiz M., and Pandolfi A. Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis. Int. J. Numer. Meth. Eng. 44 9 (1999) 1267-1282
38. Palmer S.J.P., and Field J.E. The deformation and fracture of β-HMX. Proceeding of the Royal Society of London Series A: Math. Phys. Sci. 383 1785 (1982) 399-407
39. Palmer S.J.P., Field J.E., and Huntley J.M. Deformation, strengths and strains to failure of polymer bonded explosives. Proceeding of the Royal Society of London Series A: Math. Phys. Sci. 440 1909 (1993) 399-419
40. Rae P.J., Goldrein H.T., Palmer S.J.P., Field J.E., and Lewis A.L. Studies of the failure mechanisms of polymer-bonded explosives by high resolution moiré interferometry and environmental scanning electron microscopy. In: Short J.M., and Kennedy J.E. (Eds). Proceedings of the 11th Detonation Symposium (1998), Snowmass Village, Colorado 66-75
41. Rae P.J., Goldrein H.T., Palmer S.J.P., Field J.E., and Lewis A.L. Quasi-static studies of the deformation and failure of β-HMX based polymer bonded explosives. Proceeding of the Royal Society of London Series A: Math. Phys. Sci. 458 2019 (2002) 743-762
42. Rae P.J., Goldrein H.T., Palmer S.J.P., Field J.E., and Lewis A.L. Quasi-static studies of the deformation and failure of PBX 9501. Proceeding of the Royal Society of London Series A: Math. Phys. Sci. 458 2025 (2002) 2227-2242
43. Rahulkumar P., Jagota A., Bennison S.J., and Saigal S. Cohesive element modelling of viscoelastic fracture: application to peel testing of polymers. Int. J. Solids Struct. 37 (2000) 1873-1897
44. Schapery R.A. A theory of crack initiation and growth in viscoelastic media. Part I, II, III. Int. J. Fract. 11 1 (1975) 141-159
45. Schapery R.A. A theory of crack initiation and growth in viscoelastic media. Part I, II, III. Int. J. Fract. 11 3 (1975) 369-387
46. Schapery R.A. A theory of crack initiation and growth in viscoelastic media. Part I, II, III. Int. J. Fract. 11 4 (1975) 549-562
47. Seidel G.D., Allen D.H., Helms K.L.E., and Groves S.E. A model for predicting the evolution of damage in viscoelastic particle-reinforced composites. Mech. Mater. 37 1 (2005) 163-178
48. Skidmore C.B., Phillips D.S., Howe P.W., Mang J.T., and Romero J.A. The evolution of microstructural changes in pressed HMX explosives. In: Short J.M., and Kennedy J.E. (Eds). Proceedings of the 11th Detonation Symposium (1998), Snowmass Village, Colorado 556-564
49. Song S.H., Paulino G.H., and Buttlar W.G. A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material. Eng. Fract. Mech. 73 18 (2006) 2829-2848
50. Swallowe G.M., and Field J.E. The ignition of a thin layer of explosive by impact; the effect of polymer particles. Proceeding of the Royal Society of London Series A: Math. Phys. Sci. 379 1777 (1982) 389-408
51. Tan H., Huang Y., Liu C., and Geubelle P.H. The Mori-Tanaka method for composite materials with nonlinear interface debonding. Int. J. Plast. 21 10 (2005) 1890-1918
52. Tan H., Liu C., Huang Y., and Geubelle P.H. The cohesive law for the particle/matrix interfaces in high explosives. J. Mech. Phys. Solids 53 8 (2005) 1892-1917
53. Tan H., Huang Y., Liu C., Ravichandran G., Inglis H.M., and Geubelle P.H. The uniaxial tension of particulate composite materials with nonlinear interface debonding. Int. J. Solids Struct. 44 6 (2007) 1809-1822
54. Tang H., Barthelat F., and Espinosa H. An elasto-viscoplastic interface model for investigating the constitutive behavior of nacre. J. Mech. Phys. Solids 55 7 (2007) 1410-1438
55. Timoshenko S.P., and Goodier J.N. Theory of Elasticity. third ed. (1970), McGraw-Hill
56. Tvergaard V., and Hutchinson J.W. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40 6 (1992) 1377-1397
57. Wiegand, D., 1995. Constant critical strain for failure of highly filled polymer composites. Third International Conference Deformation and Fracture of Composites. University of Surrey, Guildford, UK.
58. Xu F., Aravas N., and Sofronis P. Constitutive modeling of solid propellant materials with evolving microstructural damage. J. Mech. Phys. Solids 56 5 (2008) 2050-2073
59. Ye S., Tonokura K., and Koshi M. Energy transfer rates and impact sensitivities of crystalline explosives. Combust Flame 132 (2003) 240-246
60. Yoon C., and Allen D.H. Damage dependent constitutive behaviour and energy release rate for a cohesive zone in a thermo-viscoelastic solid. Int. J. Fract. 96 1 (1999) 55-74
61. Zaug J.M. Elastic constants of β-HMX and tantalum, equations of state of supercritical fluids and fluid mixtures and thermal transport determinations. In: Short J.M., and Kennedy J.E. (Eds). Proceedings of the 11th Detonation Symposium (1998), Snowmass Village, Colorado
62. Zhang C.Y. Viscoelastic Fracture Mechanics (2006), Science Press, Beijing p. 49
63. Zhou F.H., Molinari J.F., and Shioya T. A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials. Eng. Fract. Mech. 72 9 (2005) 1383-1410