Identification and characterization of delamination in polymer coated metal sheet

Journal of the Mechanics and Physics of Solids

Volumn 56, Issue 11, 2008, Pages 3259-3276

  van den Bosch, M J ^a,b   Schreurs, P J G ^a   Geers, M G D ^a  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b NETHERLANDS INSTITUTE FOR METALS RESEARCH   (Netherlands)

Author keywords

Cohesive zone; Parameter identification; Peel test; Polymer coated steel; Polymer metal interface

Indexed keywords

ABS RESINS; DELAMINATION; IDENTIFICATION (CONTROL SYSTEMS); PAPER SHEETING; POLYMERS; SHEET METAL; STEEL SHEET;

COHESIVE ZONE; PARAMETER IDENTIFICATION; PEEL TEST; POLYMER COATED STEEL; POLYMER METAL INTERFACE;

PLASTIC COATINGS;

EID: 53249132630     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmps.2008.07.006     Document Type: Article

References (43)

1. Baaijens F.P.T. Calculation of residual stresses in injection-molded products. Rheol. Acta 30 (1991) 284-299
2. Beentjes, P., 2004. Durability of polymer coated steel in diluted acetic acid environment. Ph.D. Thesis, Technical University of Delft, The Netherlands.
3. Bocciarelli M., Bolzon G., and Maier G. Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping. Mech. Mater. 37 (2005) 855-868
4. Boelen B., Den Hartog H., and Van der Weijde H. Product performance of polymer coated packaging steel, study of the mechanism of defect growth in cans. Progr. Org. Coat. 50 (2004) 40-46
5. Chandra N., Li H., Shet C., and Ghonem H. Some issues in the application of cohesive zone models for metal-ceramic interfaces. Int. J. Solids Struct. 39 (2002) 2827-2855
6. Chang D.F., and Wang J.E. Analysis of draw-redraw processes. Int. J. Mech. Sci. 40 (1998) 793-804
7. Chvedov D., and Jones R. Frictional behavior of rolled surfaces coated with polymer films. Surf. Coat. Technol. 188-189 (2004) 544-549
8. Cooreman S., Lecompte D., Sol H., Vantomme J., and Debruyne D. Elasto-plastic material parameter identification by inverse methods: calculation of the sensitivity matrix. Int. J. Solid Struct. 44 (2007) 4329-4341
9. De Borst R. Numerical aspects of cohesive-zone models. Eng. Fract. Mech. 70 (2003) 1743-1757
10. Den Toonder, J.M.J., Govaert, L.E., Van Melick, H.G.H., Engels, T.A.P., Van Breemen, L.C.A., Pelletier, C.G.N., Meijer, H.E.H., 2006. Indentation: the experimenter's holy grail for small-scale polymer characterization? In: Proceedings of the 13th International Conference on Deformation, Yield and Fracture of Polymers, Kerkrade, The Netherlands, pp. 175-178.
11. Dupaix R.B., and Boyce M.C. Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG). Polymer 46 (2005) 4827-4838
12. Eyring H. Viscosity, plasticity, and diffusion as examples of absolute reaction rates. J. Chem. Phys. 4 (1936) 283-295
13. Fedorov A., Van Tijum R., Vellinga W.P., and De Hosson J.T.M. Work of adhesion in laser-induced delamination along polymer-metal interfaces. J. Appl. Phys. 101 (2007) 043520
14. Foot J.S., Truss R.W., Ward I.M., and Duckett R.A. The yield behaviour of amorphous polyethelene terephtalate: an activated rate theory approach. J. Mater. Sci. 22 (1987) 1437-1442
15. Geers, M.G.D., Baaijens, F.P.T., Oomens, C.W.J., 1999. Optimization of experiments for the identification of material parameters in computational models. In: Carlomagno, G.M., Brebbia, C.A. (Eds.), Computational Methods and Experimental Measurements (IX), United Kingdom, pp. 543-552.
16. Govaert L.E., Timmermans P.H.M., and Brekelmans W.A.M. The influence of intrinsic strain softening on strain localization in polycarbonate: modeling and experimental validation. J. Eng. Mater. Technol. 122 (2000) 177-185
17. Graziano F. Coil and sheet coating. Metal Finish. 98 (2000) 175-176
18. Haward R., and Thackray G. The use of a mathematical model to describe isothermal stress-strain curves in glassy polymers. Proc. R. Soc. London A 302 (1968) 453-472
19. Hu Y.S., Prattipati V., Mehta S., Schiraldi D.A., Hiltner A., and Bear E. Improving gas barrier of PET by blending with aromatic polyamides. Polymer 46 (2005) 2685-2698
20. Huang C.H., Schmid S.R., and Wang J.E. Thermal effects on polymer laminated steel formability in ironing. J. Manage. Sci. Eng. 123 (2001) 225-230
21. Kafkalidis M.S., and Thouless M.D. The effect of geometry and material properties on the fracture of single lap-shear joints. Int. J. Solid Struct. 39 (2002) 4367-4383
22. Kinloch A.J., Lau C.C., and Williams J.G. The peeling of flexible laminates. Int. J. Fract. 66 (1994) 45-70
23. Klompen E.T.J., Engels T.A.P., Govaert L.E., and Meijer H.E.H. Modeling of the postyield response of glassy polymers: influence of thermomechanical history. Macromolecules 38 (2005) 6997-7008
24. Lee J.M., Ko D.C., Lee K.S., and Kim B.M. Identification of the bulk behavior of coatings by nano-indentation test and FE-analysis and its application to forming analysis of the coated steel sheet. J. Mater. Process. Technol. 187-188 (2007) 309-313
25. Leonov A.I. Nonequilibrium thermodynamics and rheology of viscoelastic polymer media. Rheol. Acta 15 (1976) 85-98
26. Li S., Thouless M.D., Waas A.M., Schroeder J.A., and Zavattieri P.D. Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer-matrix composite. Eng. Fract. Mech. 73 (2006) 64-78
27. Liu L., and Wang J. Modeling springback of metal-polymer-metal laminates. J. Manage. Sci. Eng. 126 (2004) 599-604
28. Meijer H.E.H., and Govaert L.E. Multi-scale analysis of mechanical properties of amorphous polymer systems. Macromol. Chem. Phys. 204 2 (2003) 274-288
29. Meuwissen M.M.H., Oomens C.W.J., Baaijens F.P.T., Petterson R., and Janssen J.D. Determination of the elasto-plastic properties of aluminium using a mixed numerical-experimental method. J. Mater. Process. 75 (1998) 204-211
30. Tervoort T.A., and Govaert L.E. Strain-hardening behavior of polycarbonate in the glassy state. J. Rheol. 44 (2000) 1263-1277
31. Van den Bosch M.J., Schreurs P.J.G., and Geers M.G.D. An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion. Eng. Fract. Mech. 73 (2006) 1220-1234
32. Van den Bosch M.J., Schreurs P.J.G., and Geers M.G.D. A cohesive zone model with a large displacement formulation accounting for interfacial fibrilation. Eur. J. Mech. 26 (2007) 1-19
33. Van den Bosch, M.J., Schreurs, P.J.G., Geers, M.G.D., 2007. On the development of a 3D cohesive zone element in the presence of large deformations. Comput. Mech. 42, 171-180.
34. Van den Bosch M.J., Schreurs P.J.G., Geers M.G.D., and Van Maris M.P.F.H.L. Interfacial characterization of pre-strained polymer coated steel by a numerical-experimental approach. Mech. Mater. 40 (2007) 302-317
35. Van den Bosch, M.J., Schreurs, P.J.G., Geers, M.G.D., 2008. On the prediction of delamination during deep-drawing of polymer coated metal sheet. J. Mater. Process. Technol., in press.
36. Van der Aa H.C.E., Van der Aa M.A.H., Schreurs P.J.G., Baaijens F.T.P., and Van Veenen W.J. An experimental and numerical study of the wall ironing process of polymer coated sheet metal. Mech. Mater. 32 (2000) 423-443
37. Van der Aa M.A.H., Schreurs P.J.G., and Baaijens F.T.P. Modelling of the wall ironing process of polymer coated sheet metal. Mech. Mater. 33 (2001) 555-572
38. Van Tijum R., and De Hosson J.T.M. Effects of self-affine surface roughness on the adhesion of metal-polymer interfaces. J. Mater. Sci. 40 (2005) 3503-3508
39. Van Tijum R., Vellinga W.P., and De Hosson J.T.M. Surface roughening of metal-polymer systems during plastic deformation. Acta Mater. 55 (2007) 2757-2764
40. Xu X.P., and Needleman A. Void nucleation by inclusions debonding in a crystal matrix. Modelling Simulation Mater. Sci. Eng. 1 (1993) 111-132
41. Yang Q.D., and Thouless M.D. Mixed-mode fracture analyses of plastically-deforming adhesive joints. Int. J. Fract. 110 (2001) 175-187
42. Yang Q.D., Thouless M.D., and Ward S.M. Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation. J. Mech. Phys. Solids 47 (1999) 1337-1353
43. Yang Q.D., Thouless M.D., and Ward S.M. Elastic-plastic mode-II fracture of adhesive joints. Int. J. Solid Struct. 38 (2001) 3251-3262