Chapter 1. Tribological applications of polymers and their composites: Past, present and future prospects

Tribology and Interface Engineering Series

Volumn 55, Issue , 2008, Pages 1-14

  Briscoe, Brian J ^a   Sinha, Sujeet K ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 53049098459     PISSN: 15723364     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S1572-3364(08)55001-4     Document Type: Chapter

References (47)

1. Briscoe B.J., and Sinha S.K. Tribology of polymeric solids and their composites. In: Stachowiak G. (Ed). Wear - Materials, Mechanism and Practice (2005), John Wiley & Sons, England 223-267
2. Tambe N.S., and Bhushan B. Micro/nanotribological characterization of PDMS and PMMA used for BioMEMS/NEMS applications. Ultramicroscopy 105 (2005) 238-247
3. Satyanarayana N., Sinha S.K., and Ong B.H. Tribology of a novel UHMWPE/PFPE dual-film coated onto Si surface. Sens. Actuators A: Phys. 128 1 (2006) 98-108
4. Schallamach A. Abrasion of rubber by a needle. J. Polym. Sci. 9 5 (1952) 385-404
5. Greenwood J.A., and Tabor D. The friction of hard sliders on lubricated rubber: The importance of deformation losses. Proc. Physical Soc. 71 (1958) 989-1001
6. Briscoe B.J. Wear of polymers: An assay on fundamental aspects. Tribol. Int. 14 4 (August 1981) 231-243
7. Briscoe B.J., and Sinha S.K. Wear of polymers. Proc. Inst. Mech. Eng. J. Eng. Tribol. 216 (2002) 401-413
8. Tabor D. The physical meaning of indentation and scratch hardness. Br. J. Appl. Phys. 7 (1956) 159-166
9. Briscoe B.J., and Tabor D. Rheology of thin organic films. ASLE Trans. 17 (1974) 158-165
10. Ratner S.N., Farberoua I.I., Radyukeuich O.V., and Lure E.G. Correlation between wear resistance of plastics and other mechanical properties. Sov. Plast. 7 (1964) 37-45
11. J. K. Lancaster, Friction and wear. Chapter 14, in Polymer Science, A Materials Science Handbook (ed. A. D. Jenkins), North-Holland, Amsterdam, 1972.
12. Friedrich K., Lu Z., and Hager A.M. Recent advances in polymer composites' tribology. Wear 190 2 (1995) 139-144 (and references therein)
13. Briscoe B.J., Pogosian A.K., and Tabor D. The friction and wear of high density polyethylene: The action of lead oxide and copper oxide fillers. Wear 27 (1974) 19-34
14. Briscoe B.J. The tribology of composites materials: A preface. In: Friedrich K. (Ed). Advances in Composite Tribology (1993), Elsevier 3-15
15. Li F., Hu K., Li J., and Zhao B. The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene. Wear 249 (2001) 877-882
16. Sawyer W.G., Freudenberg K.D., Bhimaraj P., and Schadler L.S. A study on the friction and wear behavior of PTFE filled with alumina nanoparticles. Wear 254 (2003) 573-580
17. Chen W.X., Li F., Han G., Xia J.B., Wang L.Y., Tu J.P., and Xu Z.D. Tribological behavior of carbon-nanotube-filled PTFE composites. Tribol. Lett. 15 3 (2003) 275-278
18. Lai S.Q., Li T.S., Liu X.J., and Lv R.G. A study on the friction and wear behavior of PTFE filled with acid treated nano-attapulgite. Macromolecular Mater. Eng. 289 (2004) 916-922
19. Rong M.Z., Zhang M.Q., Liu H., Zeng H., Wetzel B., and Friedrich K. Microstructure and tribological behavior of polymeric nanocomposites. Ind. Lubrication Tribol. 53 (2001) 72-77
20. Wetzel B., Haupert F., Friedrich K., Zhang M.Q., and Rong M.Z. Impact and wear resistance of polymer nanocomposites at low filler content. Polymer Eng. Sci. 42 (2002) 1919-1927
21. Wetzel B., Haupert F., and Zhang M.Q. Epoxy nanocomposites with high mechanical and tribological performance. Composites Sci. Technol. 63 (2003) 2055-2067
22. 4 filled epoxy composites. Wear 254 (2003) 784-796
23. Zhang M.Q., Rong M.Z., Yu S.L., Wetzel B., and Friedrich K. Effect of particle surface treatment on the tribological performance of epoxy based nanocomposites. Wear 253 (2002) 1086-1093
24. Zhang M.Q., Rong M.Z., Yu S.L., Wetzel B., and Friedrich K. Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles. Macromolecular Mater. Eng. 287 (2002) 111-115
25. Jacobs O., Xu W., Schadel B., and Wu W. Wear behaviour of carbon nanotube reinforced epoxy resin composites. Tribol. Lett. 23 1 (2006) 65-75
26. Luo Y., Rong M.Z., and Zhang M.Q. Covalently connecting nanoparticles with epoxy matrix and its effect on the improvement of tribological performance of the composites. Polym. Polym. Composites, 13 (2005) 245-252
27. Rong M.Z., Zhang M.Q., Shi G., Ji Q.L., Wetzel B., and Friedrich K. Graft polymerization onto inorganic nanoparticles and its effect on tribological performance improvement of polymer composites. Tribol. Int. 136 (2003) 697-707
28. Wang Q., Xu J., Shen W., and Liu W. An investigation of the friction and wear properties of nanometer Si3N4 filled PEEK. Wear 196 (1996) 82-86
29. 2 on the tribological behaviour of PEEK. Wear 198 (1996) 216-219
30. 2-filled polyetheretherketone. J. Appl. Polym. Sci. 69 (1998) 135-141
31. Wang Q., Xue Q., and Shen W. The friction and wear properties of nanometer SiO2 filled polyetheretherketone. Tribol. Int. 130 (1997) 193
32. Wang Q., Xu J., Shen W., and Xue Q. The effect of nanometer SiC filler on the tribological behavior of PEEK. Wear 209 (1997) 316-321
33. Xue Q., and Wang Q. Wear mechanisms of polyetheretherketone composites filled with various kinds of SiC. Wear 213 (1997) 54-58
34. Werner P., Altstadt V., Jaskulka R., Jacobs O., Sandler J.K.W., Shaffer M.S.P., and Windle A.H. Tribological behaviour of carbon-nanofibre-reinforced poly (ether ether ketone). Wear 257 (2004) 1006-1014
35. 3/PEEK composites under the dry sliding condition. Tribol. Int. 140 (2007) 105-110
36. Jawahar P., Gnanamoorthy R., and Balasubramanian M. Tribological behaviour of clay-thermoset polyester nanocomposites. Wear 261 (2006) 835-840
37. Bhimaraj P., Burris D.L., Action J., Sawyer W.G., Toney C.G., Siegel R.W., and Schadler L.S. Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly (ethylene) terephthalate composites. Wear 258 (2005) 1437-1443
38. Yang Z., Dong B., Huang Y., Liu L., Yan F.-Y., and Li H.-L. Enhanced wear resistance and micro-hardness of polystyrene nanocomposites by carbon nanotubes. Mater. Chem. Phys. 94 (2003) 109-113
39. 2 particle-filled poly (phthalazine ether sulfone ketone) composites. J. Appl. Polym. Sci. 92 (2004) 906-914
40. Yan H., Ning R., Liang G., and Ma X. The performance of BMI nanocomposites filled with nanometer SiC. J. Appl. Polym.Sci. 95 (2005) 1246-1250
41. Zoo Y.S., An J.W., Lim D.P., and Lim D.S. Effect of carbon nanotube addition on tribological behavior of UHMWPE. Tribol. Lett. 16 4 (2004) 305
42. 2, ZnO, CuO and SiC. Wear 258 (2005) 1411-1421
43. Schwartz C.J., and Bahadur S. Studies on the tribological behavior and transfer film-counterface bond strength for polyphenylene sulfide filled with nanoscale alumina particles. Wear 237 (2000) 261-273
44. Cai H., Yan F., and Xue Q. Investigation of tribological properties of polyimide/carbon nanotube nanocomposites. Mater. Sci. Eng. A 364 (2004) 94-100
45. Klein J., Kumacheva E., Mahalu D., Perahia D., and Fetters L.J. Reduction of frictional forces between solid surfaces bearing polymer brushes. Nature 370 (1994) 634-636
46. Müller M., Yan X., Lee S., Perry S., and Spencer N.D. Lubrication properties of a brushlike copolymer as a function of the amount of solvent absorbed within the brush. Macromolecules 38 13 (2005) 5706-5713
47. Matsuno R., Otsuka H., and Takahara A. Polystyrene-grafted titanium oxide nanoparticles prepared through surface-initiated nitroxide-mediated radical polymerization and their application to polymer hybrid thin films. Soft Matter 2 (2006) 415-421