The hardenability of austenite with different alloy content and dispersion in dual-phase steels

Journal of Materials Processing Technology

Volumn 208, Issue 1-3, 2008, Pages 75-84

  Demir, B ^a   Erdogan M ^b  

^a KARABUK UNIVERSITY   (Turkey)

^b Faculty of Technical Education   (Turkey)

Author keywords

Alloy content; Dual phase steels; Hardenability; Phase transformation

Indexed keywords

ALLOYS; ANNEALING; AUSTENITE; CARBIDES; COOLING; DISPERSION (WAVES); FREEZING; INDUSTRIAL PLANTS; MARTENSITE; POWER PLANTS; QUENCHING; STEEL; WEAR RESISTANCE;

ALLOY CONTENT; CARBIDE FORMATION; CHEMICAL COMPOSITIONS; CONTINUOUS ANNEALING; COOLING RATE; CRITICAL COOLING RATES; DUAL-PHASE STEELS; FURNACE COOLING; HARDENABILITY; INDUSTRIAL PRODUCTION; INTERCRITICAL ANNEALING; IRON AND STEEL; MARTENSITE FORMATION; PHASE TRANSFORMATION; STEEL COMPOSITIONS;

IRON AND STEEL PLANTS;

EID: 52949125647     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2007.12.094     Document Type: Article

References (36)

1. Andrew K.W. Empirical formulae for the calculation of some transformation temperatures. J. Iron Steel Inst. 203 (1965) 721-727
2. Bangaru N.R.V., and Sachdev A.K. Influence of cooling rate on the microstructure and retained austenite in an intercritical annealed vanadium containing HSLA steel. Met. Trans. A 13A (1982) 1899-1906
3. Basso A.D., Martínez R.A., and Sikora J.A. Influence of austenitising and austempering temperatures on microstructure and properties of dual phase ADI. Mater. Sci. Technol. 23 11 (2007) 1321-1326
4. Cullity B.D. Elements of X-Ray Diffraction. 2nd edn. (1978), Addison-Wesley Series in Metallurgy and Materials, USA
5. Eldis G.T. Influence of microstructure and testing procedure on the measured mechanical properties of heat-treated dual-phase steels. In: Kott R.A., and Morris J.W. (Eds). Structure and Properties of Dual-Phase Steels (1979), AIME, New York 202-220
6. Erdogan M. The effect of new ferrite content on the tensile fracture behaviour of dual phase steels. J. Mater. Sci. 37 (2002) 3623-3630
7. Erdogan M. The effect of austenite dispersion on phase transformation in dual phase steels. Scr. Mater. 48 (2003) 501-506
8. Erdogan M., and Priestner R. Effect of epitaxial ferrite on yielding and plastic flow in dual phase steel in tension and compression. Mater. Sci. Technol. 15 (1999) 1273-1284
9. Erdogan M., and Priestner R. Effect of martensite content, its dispersion, and epitaxial ferrite content on Bauschinger behaviour of dual phase steel. Mater. Sci. Technol. 18 (2002) 369-376
10. Furukawa T., Morikawa H., Takechi H., and Koyama K. Process factors for highly ductile dual-phase sheet steels. In: Kott R.A., and Morris J.W. (Eds). Structure and Properties of Dual-Phase Steels (1979), AIME, New York 281-303
11. Geib M.D., Matlock D.K., and Krauss G. The effect of intercritical temperature on the structure of niobium microalloyed dual-phase steel. Met. Trans. A 11A (1980) 1683-1689
12. Hillis D.J., Llewellyn D.T., and Evans P.J. Rapid annealing of dual phase steels. Ironmaking Steelmaking 25 1 (1998) 47-54
13. G. Hughes, The influence of prior microstructure on the constitution of dual-phase steels, M.Sc. Thesis, University of Manchester, Manchester, UK, May 1986.
14. Huppi G.S., Matlock D.K., and Krauss G. An evaluation of the importance of epitaxial ferrite in dual-phase steel microstructures. Scr. Met. 25 (1980) 1239-1243
15. T. Jamiru, Effect of austenite dispersion in dual phase steel on its hardenability, M.Sc. Thesis, University of Manchester, 1990.
16. Jeong W.C., and Kim C.H. Ferrite growth on cooling after intercritical annealing in a dual phase steel. Scr. Met. 118 (1985) 37-42
17. Jeong W.C., and Kim C.H. On the isolated retained austenite in dual phase steel. Met. Trans. A 18A (1987) 933-934
18. Kaplan M., Gür C.H., and Erdogan M. Characterization of dual-phase steels using magnetic Barkhausen noise technique. J. Nondestruct. Eval. 26 (2007) 79-87
19. Lawson R.D., Matlock D.K., and Krauss G. Etching technique for microalloyed dual-phase steels. Metallography 13 (1980) 71-87
20. Lawson R.D., Matlock D.K., and Krauss G. The effect of microstructure on the deformation behaviour and mechanical properties of a dual phase steel. In: Kott R.A., and Bramfitt B.L. (Eds). Fundamentals of Dual-Phase Steels (1981), AIME, New York 347-381
21. Marder A.R. Factors affecting the ductility of dual phase steels. In: Davenport A.T. (Ed). Formable HSLA and Dual Phase Steels (1977), AIME, New York 87-98
22. Matlock D.K., Krauss G., Ramos L.F., and Huppi G.S. A correlation of processing variables with deformation of dual-phase steels. In: Kott R.A., and Morris J.W. (Eds). Structure and Properties of Dual-Phase Steels, (1979), AIME, New York 62-89
23. Matsudo K., Osuma K., and Kurikava K. Metallurgical aspects of the development continuous annealing technology at Nippin Kokan. Metall. Soc. AIME (1985) 3-36
24. Mould P.R., and Skena C.C. Structure and properties of cold rolled ferrite phase martensite (dual-phase) steels sheets. In: Davenport A.T. (Ed). Formable HSLA and Dual Phase Steels (1977), AIME, New York 183-203
25. Osawa K., Shimomura T., Kinoshita M., Matsudo K., and Iwase K. Development of high strength cold rolled steel sheets for automotive use by continuous annealing. J. Met. 30 (1978) 6-9
26. Pradhan R. Continuous annealing of the steel. ASM Handbook 4 (1997) 56-66 (5th printing)
27. Priestner R. Effect of austenite dispersion and plastic deformation on phase transformation in dual phase steel. Conf. Proc. Phase Transformation '87 (1987), Institute of Metals, Cambridge 411-413
28. Priestner R., and Ajmal M. Effect of carbon content and microalloying on martensitic hardenability of austenite of dual phase steel. Mater. Sci. Technol. 3 (1987) 360-364
29. Rigsbee J.M., and Vander Arend P.J. Laboratory studies of microstructures and structure-property relationships in dual-phase steels. In: Davenport A.T. (Ed). Formable HSLA and Dual Phase Steels (1977), AIME, New York 56-85
30. Rocha R.O., Melo T.M.F., Pereloma E.V., and Santos D.B. Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel. Mater. Sci. Eng. A 391 (2005) 296-304
31. Saleh M.H., and Priestner R. Retained austenite in dual phase silicon steels and effect on mechanical properties. J. Mater. Process. Technol. 113 (2001) 587-593
32. Sarwar M., and Priestner R. Hardenability of austenite in a dual-phase steel. J. Mater. Eng. Perform. 83 (1999) 380
33. Thomas G., and Koo Y.J. Developments in strong ductile duplex ferritic-martensitic steels. In: Kott R.A., and Bramfitt B.L. (Eds). Fundamentals of Dual-Phase Steels (1981), AIME, New York 183-201
34. Tomota Y. Effects of morphology and strength of martensite on cyclic deformation behaviour in dual-phase steels. Mater. Sci. Technol. 3 (1987) 415-421
35. Yi J.J., and Kim I.S. Ferrite growth during slow cooling from the intercritical annealing of a dual phase steel. Scr. Met. 17 (1983) 299-302
36. Zhao L., Van Dijk N.H., Brück E., Sietsma J., and Van Der Zwaag S. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels. Mater. Sci. Eng. A 313 (2001) 145-153