Thermal buoyancy effects in rotating non-isothermal flows

International Journal of Rotating Machinery

Volumn 7, Issue 6, 2001, Pages 435-446

  Soong, C Y ^a  

^a FENG CHIA UNIVERSITY   (Taiwan)

Author keywords

Non isothermal flow; Rotating cylinders; Rotating disks; Rotating ducts; Rotation induced buoyancy; Scaling analysis

Indexed keywords

EID: 52549109194     PISSN: 1023621X     EISSN: 15423034     Source Type: Journal    
DOI: 10.1155/S1023621X01000380     Document Type: Article

References (84)

1. Barcilon, V., and Pedlosky, J., 1967a, Linear theory of rotating stratified fluid motions, J. Fluid Mech., vol. 29, pp. 1-16.
2. Barcilon, V., and Pedlosky, J., 1967b, A unified linear theory of homogeneous and stratified rotating fluid, J. Fluid Mech., vol. 29, pp. 609-621.
3. Barcilon, V., and Pedlosky; J., 1967c, On the steady motions produced by a stable stratification in a rapidly rotating fluid, J. Fluid Mech., vol. 20, pp. 673-690.
4. Batchelor, G. K., 1951, Note on a class of solutions of the Navier-Stokes equations representing steady rotationally-symmetrical flow, Quart. J. Mech. Appl. Math., vol. 4, pp. 29-41.
5. Brummell, N., Hart, J. E., and Lopez, J. M., 2000, On the flow induced by centrifugal buoyancy in a differentially-heated rotating convection, Theoret. Comput. Fluid Dynamics, vol. 14, pp. 39-51.
6. Clifford, R. J., Harasgama, S. P., and Morris, W. D., 1984, An experimental study of local and mean heat transfer in a triangular-sectional duct rotating in the orthogonal mode, ASME Trans. J. Eng. Gas turbines Power, vol. 106, pp. 661-667.
7. Chew, J. W., 1981, Similarity solutions for non-isothermal flow between infinite rotating discs, Report No. TFMRC/38, Thermo-Fluid Mechanics Research Center, School of Engineering and Applied Science, University of Sussex, UK.
8. Dutta, S., Andrews, M. J., and Han, J. C., 1996, On flow separation with adverse rotational buoyancy, ASME J. Heat Transfer, vol. 118, no. 1, pp. 39-50.
9. Ekkad, S. V., and Han, J. C., 1997, Local heat transfer in rotating smooth ribbed two-pass square channels with yhree channel orientations, Int. J. Heat Mass Transfer, vol. 40, no. 11, pp. 2525-2537.
10. Fann, S., Yang, W. J., and Zhang, N., 1994, Local heat transfer in a rotating serpentine passage with rib-roughened surface, Int. J. Heat Mass Transfer, vol. 37, no. 22, pp. 217-228.
11. Greenspan, H. P., 1968, The Theory of Rotating Fluids, Cambridge University Press, London.
12. Guidez, J., 1989, Study of the convective heat transfer in a rotating coolant channel, ASME Trans. J. Turbomachinery, vol. 111, pp. 43-50.
13. Guo, J. Y., and Zhang, C. M., 1992, Thermal drive in centrifugally driven thermal convection in a vertical rotating cylinder, Int. J. Heat Mass Transfer, vol. 35, pp. 1635-1644.
14. Han, J. C., and Zhang, Y., 1992, Effects of uneven wall temperature on local heat transfer in a rotating square channel with smooth walls and radial outward flow, ASME Trans. J. Heat Transfer, vol. 114, pp. 850-858.
15. Harasgama, P., and Morris, W. D., 1988, The influence of rotation on the heat transfer characteristics of circular, triangular, and square-sectioned coolant -passages of gas turbine rotor blades, ASME Trans. J. Turbomachinery, vol. 110, pp. 44-50.
16. Hart, J. E., 2000, On the Influence of Centrifugal Buoyancy on Rotating Convection, J. Fluid Mech., vol. 403, pp. 133-151.
17. Herrero, J., and Giralt, F., and Humphrey, J. A. E. 1999, Non-isothermal laminar flow and heat transfer between disks corotating in a fixed enclosures, Int. J. Heat Mass Transfer, vol. 42, pp. 3291-3306.
18. Herrero, J., Humphrey, J. A. E., and Giralt, F. 1994, Comparative analysis of coupled flow and heat transfer between corotating disks in rotating and fixed cylindrical enclosures, in Heat Transfer in Gas Turbines, ASME HTD-Vol. vol. 300, pp. 111-121.
19. Homsy, G. M., and Hudson, J. L., 1969, Centrifugally driven thermal convection in a rotating cylinder, J. Fluid Mech., vol. 35, no. 1, pp. 33-52.
20. Homsy, G. M., and Hudson, J. L., 1971a, Heat transfer in a rotating cylinder of fluid heated from above, Int. J. Heat Mass Transfer, vol. 14, pp. 1149-1159.
21. Homsy, G. M., and Hudson, J. L., 1971b, Centrifugal convection and its effect on the asymmetric stability of a bounded rotating fluid heated from below, J. Fluid Mech., vol. 48, pp. 605-624.
22. Hudson, J. L., 1968a, Convection near a cooled disk rotating with its environment, Int. J. Heat Mass Transfer, vol. 11, pp. 407-414.
23. Hudson, J. L., 1968b, Non-isothermal flow between rotating disks, Chem. Eng. Sci., vol. 11, pp. 407-414.
24. Hudson, J. L., Tang, D., and Abell, S., 1978, Experiments on centrifugally driven thermal convection in a rotating cylinder, J. Fluid Mech., vol. 86, pp. 147-159.
25. Humphrey, J. F., Morris, W. D., and Barrow, H., 1967, Convection heat transfer in the entry region of a tube which revolves about an axis parallel to itself, Int. J. Heat Mass Transfer, vol. 10, pp. 333-347.
26. Hwang, G. J., and Jen, T. C., 1990, Convective heat transfer in rotating isothermal ducts, Int. J. Heat Mass Transfer, vol. 33, pp. 1817-1828.
27. Hwang, G. J., and Soong, C. Y., 1992, Convective heat transfer in rotating channels, Invited Keynote Paper Presented at the 4th Int'l Symp. on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-4), Honolulu, USA, April 5-7.
28. Hwang, G. J., Tzeng, S. C., Mao, C. P., and Soong, C. Y., 2001, Heat transfer in a radially rotating rotating four-pass serpentine channel with staggered half-V rib turbulators, ASME Trans. J. Heat Transfer, vol. 123, no. 1, pp. 39-50.
29. Iskakov, K. M., and Trushin, V. A., 1985, The effect of rotation on heat transfer in the radial cooling channels of turbine blades, Thermal Engng, vol. 32, pp. 93-96.
30. Jen, T. C., and Lavine, A. S., 1992, Laminar heat transfer and fluid flow in the entrance region duct with rectangular cross section: the effect of aspect ratio, ASME Trans. J. Heat Transfer, vol. 114, pp. 574-581.
31. Jen, T. C., Lavine, A. S., and Hwang, G. J., 1992, Simultaneously developing laminar convection in rotating isothermal square channels, Int. J. Heat Mass Transfer, vol. 35, pp. 239-254.
32. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994, Heat transfer in rotating serpentine passages with trips skewed to the Row, ASME J. Turbomachinery, vol. 116, pp. 113-123.
33. Levy, S., Neti, S., Brown, G., and Bayat, F., 1986, Laminar heat transfer and pressure drop in a rectangular duct rotating about a parallel axis, ASME J. Heat Transfer, vol. 108, pp. 350-356.
34. Mahadevappa, M., Rao, K. V. C., and Sastri, V. M. K., 1996, Numerical study of laminar fully developed fluid flow and heat transfer in rectangular and elliptical ducts rotating about a parallel axis, Int. J. Heat Mass Transfer, vol. 39, pp. 867-875.
35. Majumdar, A. K., Morris, W. D., Skiadaressis, D., and Spalding, D. B., 1976, Heat transfer in rotating ducts, Report HRS/76/5, Mechanical Engineering Department, Imperial College of Science and Technology, London, UK.
36. Matsuda, T., and Hashimoto, K., 1976, Thermally, mechanically or externally driven flows in a gas centrifuge with an insulated horizontal end plates, J. Fluid Mech., vol. 78, pp. 337-354.
37. Matsuda, T., Hashimoto, K., and Takeda, H., 1976, Thermally driven flow in a gas centrifuge with an insulated side wall, J. Fluid Mech. vol. 78, pp. 389-399.
38. Mori, Y., and Nakayama, W., 1967, Forced convective heat transfer in a straight pipe rotating around a parallel axis (first report, laminar region), Int. J. Heat Mass Transfer, vol. 10, pp. 1179-1194.
39. Morris, W. D., 1981, Heat Transfer and Fluid Flow in Rotating Coolant Channels, John Wiley, Chicheste, UK.
40. Morris, W. D., 1965, Laminar convection in a heated vertical tube rotating about a parallel axis, J. Fluid Mech., vol. 21, no. 3, pp. 453-464.
41. Morris, W. D., and Ayhan, T., 1979, Observation on the influence of rotation on heat transfer in the coolant channel of gas turbine rotor blade, Proc. Inst. Mech. Engrs, vol. 193, pp. 303-311.
42. Morris, W. D., and Ayhan, T., 1982, An experimental study of turbulent heat transfer in the tube which rotates about an orthogonal axis, Proceedings of the ICHMT Symposium Heat Mass Transfer and Rotational Machinery, Dubrovnik, Yugoslavia, August 30-September 3.
43. Murata, A., and Mochizuki, S., 2001, Effect of centrifugal buoyancy on turbulent heat transfer in an orthogonally rotating square duct with transverse or angled rib turbulators, Int. J. Heat Mass Transfer, vol. 44, pp. 2739-2750.
44. Nakayama, W., 1968, Forced convective heat transfer in a straight rotating around a parallel axis (second report, turbulent region), Int. J. Heat Mass Transfer, vol. 11, pp. 1185-1201.
45. Neti, E., Warnork, A. S., Levy, E. K., and Kannan, K. S., 1985, Computation of laminar heat transfer in rotating rectangular ducts, ASME J. Heat Transfer, vol. 107, pp. 575-582.
46. Ostrach, S. and Braum, W. H., 1958, Natural convection inside a flat rotating container, NACA TN 4323.
47. Owen, J. M., and Rogers, R. H., 1989, Flow and Heat Transfer in Rotating-Disc Systems, Vol. 1: Rotor-Stator Systems, John Wiley & Sons, New York.
48. Riley, N., 1967, Thermally induced boundary-layer flows in a rotating environment, J. Fluid Mech., vol. 29, no. 2, pp. 241-257.
49. Sakurai, T., and Matsuda, T., 1974, Gasdynamics of a centrifugal machine, J. Fluid Mech., vol. 62, no. 4, pp. 727-736.
50. Schmidt, E. H. W., 1951, Heat transmission by natural convection at high centrifugal acceleration in water cooled gas turbine blades, in IME-ASME General Discussion on Heat Transfer, p. 361, Inst. Mech. Engrs, London, UK.
51. Siegel, R., 1985, Analysis of buoyancy effect on fully developed laminar heat transfer in a rotating tube, ASME Trans. J. Heat Transfer, vol. 107, pp. 338-344.
52. Skiadaressis, D., and Spalding, D. B., 1976, Laminar heat transfer in a pipe rotating around a parallel axis, Report HRS/76/23, Mechanical Engineering Department, Imperial College of Science and Technology, London.
53. Soong, C. Y., 1996a, Theoretical analysis for axisymmetric mixed convection between rotating coaxial disks, Int. J. Heat Mass Transfer, vol. 39, no. 8, pp. 1569-1583.
54. Soong, C. Y., 1996b, Prandtl number effects on mixed convection between rotating coaxial disks, Int. J. Rotating Machinery, vol. 2, No3, pp. 161-166.
55. Soong, C. Y., and Chyuan, C. H., 1998a, Investigation of buoyancy effects in non-isothermal rotating flows by scaling analysis and a novel similarity model, Chinese J. Mech., vol. 14, no. 4, 193-207.
56. Soong, C. Y., and Chyuan, C. H., 1998b, Similarity solutions of mixed convection heat and mass transfer in combined stagnation and rotation-induced flows over a rotating disk, Heat and Mass Transfer (Warme- und Stoffubertragung), vol. 34, no. 2-3, pp. 171-180.
57. Soong, C. Y., and Chyuan, C. H., 1998c, Transport phenomena between a rotating disk and a stationary porous disk with thermal and solutal buoyancy effects, J. Chung Cheng Inst. Tech., vol. 27, no. 1, pp. 29-46.
58. Soong, C. Y., and Hwang, G. J., 1990, Laminar mixed convection in a radially rotating semiporous channel, Int. J. Heat mass Transfer, vol. 33, pp. 1805-1816.
59. Soong, C. Y., and Hwang, G. J., 1993, Stress work effects on similarity solutions of mixed convection in rotating channels with wall-transpiration, Int. J. Heat Mass Transfer, vol. 36, 845-856.
60. Soong, C. Y., Lin, S. T., and Hwang, G. J., 1991, An experimental study of convective heat transfer in radially rotating rectangular ducts, ASME Trans. J. Heat Transfer, vol. 113, pp. 604-611.
61. Soong, C. Y., and Ma, H. L., 1995, Unsteady analysis of non-isothermal flow and heat transfer between rotating co-axial disks, Int. J. Heat Mass Transfer, vol. 38, no. 10, pp. 1865-1878.
62. Soong, C. Y., and Tuliszka-Sznitko, E., 2000, Linear stability analysis of rotation-induced mixed convection in a rotor-stator disk system, Presented at the 8th International Symposium on Transport Phenomena and Dynamics Rotating Machinery (ISROMAC-8), March 26-30, Honolulu, Hawaii, USA.
63. Soong, C. Y., and Yan, W. M., 1993, Numerical study of mixed convection between two corotating symmetrically heated disks, AIAA J. Thermophysics Heat Transfer, vol. 7, no. 1, pp. 165-170.
64. Soong, C. Y., and Yan, W. M., 1994, Transport phenomena in non-isothermal flow between co-rotating asymmetrically-heated disks, Int. J. Heat Mass Transfer, vol. 37, no. 15, pp. 2221-2230.
65. Soong, C. Y., and Yan, W. M., 1999, Development of secondary flow and convective heat transfer in isothermal/iso-flux rectangular ducts rotating about a parallel axis, Int. J. Heat Mass Transfer, vol. 42, pp. 497-510.
66. Soong, C. Y., and Yan, W. M., 2001, Flow and heat transfer mechanisms of non-isothermal fluids in rotating ducts, Bulletin of the College of Engineering, NTU, National Taiwan University, Taipei, Taiwan, ROC, vol. 81, pp. 21-35.
67. Stewartson, K, 1953, On the flow between two rotating coaxial disks, Proc. Camb. Phil. Soc., 49, pp. 333-341.
68. Trefethen, L., 1955, Flow in rotating radial ducts: effects of Coriolis forces and comparison with friction in stationary bend tubes and convective in horizontal tubes, General Electric Co. Report G-55G1-350A.
69. Tuliszka-Sznitko, E., and Soong, C. Y., 2000, Instability of non-isothermal flow between coaxial rotating disks, Presented at the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000), September 11-14, 2000, Barcelona, Spain.
70. Tuliska-Sznitko, E., Soong, C. Y., Serre, E., and Bontoux, P., 2001, Absolute instability of the non-isothermal flow between coaxial rotating disks, Presented at the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2001), SeSwansea, Wales, UK.
71. Turkyilmazoglu, M., Cole, J. W., and Gajjar, J. S. B., 1999, Absolute and convective instabilities in the compressible boundary layer on a rotating disk, Theoret. Comput. Fluid Dynamics, vol 14, pp. 21-37.
72. von Karman, T., 1921, Uber laminare und turbulente reibung, Z. Angew. Math. Mech., vol. 1, pp. 233-252.
73. Wagner, J. H., Johnson, B. V., and Hajek, T. J., 1991a, Heat transfer in rotating passages with square smooth walls and radial outward flow, ASME Trans. J. Turbomachinery, vol. 113, pp. 42-51.
74. Wagner, J. H., Johnson, B. V., and Kopper, F. C., 1991b, Heat transfer in rotating serpentine passage with smooth walls, ASME Trans. J. Turbomachinery, vol. 113, pp. 321-330.
75. Wang, L., 1997, Buoyancy-forced-driven transitions in flow structure and their effects on heat transfer in a rotating curved channel, Int. J. Heat Mass Transfer, vol. 40, no. 2, pp. 223-235.
76. Wang, L., 1999, Competition of coriolis instability with centrifugal instability and its effects on heat transfer in a rotating curved heated channel, Int. J. Non-Linear Mech., vol. 34, pp. 35-50.
77. Wang, L., and Cheng, K. C., 1996, Flow transitions and combined free and forced convective heat transfer in a rotating curved circular tube, Int. J. Heat Mass Transfer, vol. 39, no. 16, pp. 3381-3400.
78. Yan, W. M., 1994, Developing flow and heat transfer in radially rotating rectangular ducts with wall-transpiration effects, Int. J. Heat Mass Transfer, vol. 37, pp. 1465-1473.
79. Yan, W. M., 1995, Effects of wall transpiration on mixed convection in a radially outward flow inside rotating ducts, Int. J. Heat Mass Transfer, vol. 38, no. 13, pp. 2333-2342.
80. Yan, W. M., Li, H. Y., and Lin, D., 1999, Mixed convection heat transfer in a radially rotating square duct with radiation effects, Int. J. Heat Mass Transfer, vol. 42, pp. 35-47.
81. Yan, W. M., and Soong, C. Y., 1995, Simultaneously developing mixed convection in radially rotating rectangular ducts, Int. J. Heat Mass Transfer, vol. 38, no. 4, pp. 665-677.
82. Yan, W. M., and Soong, C. Y., 1997, Mixed convection flow and heat transfer between two co-rotating porous disks with wall transpiration, Int. J. Heat Mass Transfer, vol. 40, no. 4, pp. 773-784, 1997.
83. Yang, W.-J., Fann, S., and Kim, J. H., 1994, Heat and fluid flow inside rotating channels, ASME Appl. Mech. Rev., vol. 47, no. 8, pp. 367-396.
84. Zandbergen, P. J., and Dijkstra, D., 1987, von Karman swirling flows, Ann. Rev. Fluid Mech., vol. 19, pp. 465-491.