Optimization of synthesis procedures for structured PSA adsorbents

Adsorption

Volumn 14, Issue 4-5, 2008, Pages 687-693

  Mosca, Alessandra ^a   Hedlund, Jonas ^a   Ridha, Firas N ^b   Webley, Paul ^b  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^b MONASH UNIVERSITY   (Australia)

Author keywords

Adsorption; Pressure drop; PSA; Structured adsorbents; Traditional adsorbents; Zeolite NaX

Indexed keywords

PACKED BEDS; PEELING; PELLETIZING; SEDIMENTATION; SILICATE MINERALS;

APPLICATIONS.; HEAT-TRANSFER; HYDROTHERMAL TREATMENT; PRESSURE DROP; PSA; STRUCTURED ADSORBENTS; SYNTHESIS PROCEDURE; TRADITIONAL ADSORBENTS; ZEOLITE FILMS; ZEOLITE NAX;

ADSORPTION;

EID: 52149103179     PISSN: 09295607     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10450-008-9126-9     Document Type: Article

References (19)

1. Brandani, F., et al.: Adsorption kinetics and dynamic behaviour of a carbon monolith. Adsorption 10, 99-109 (2004)
2. Chou, C.T., Chen, C.Y.: Carbon dioxide recovery by vacuum swing adsorption. Sep. Purif. Technol. 39, 51-65 (2004)
3. 2 recovery from flue gas by pressure swing adsorption. Ind. Eng. Chem. Res. 34, 591-598 (1995)
4. Cybulski, A., Moulijn, J.A.: In: Cybulski, A., Moulijn, J.A. (eds.) Structured Catalysts and Reactors. Dekker, New York (1998). Chap. 2
5. Glueckauf, E., Coates, J.I.: Theory of chromatography. Part IV: the influence of incomplete equilibrium on the front boundary of chromatograms and on the effectiveness of separation. J. Chem. Soc. 1315-1321 (1947)
6. Gomes, V.G., Yee, K.W.K.: Pressure swing adsorption for carbon dioxide sequestration from exhaust gases. Sep. Purif. Technol. 28, 161-171 (2002)
7. Jain, R., et al.: Air separation using monolith adsorbent bed. US Patent 6,231,644 (2001)
8. Lassinantti, M., et al.: Faujasite-type films synthesized by seeding. Microporous Mesoporous Mater. 38, 25-34 (2000)
9. Lee, L.Y., et al.: Manufacture and characterization of silicalite monoliths. Adsorpt. Sci. Technol. 18, 147-170 (2000)
10. Li, Y.Y., et al.: Zeolite monoliths for air separation. Part I: Manufacture and characterization. Trans. Inst. Chem. Eng. Part A 76, 921-930 (1998a)
11. Li, Y.Y., et al.: Zeolite monoliths for air separation. Part II: Oxygen enrichment, pressure drop and pressurization. Trans. Inst. Chem. Eng. Part A 76, 931-941 (1998b)
12. Li, Y.Y., et al.: The effect of the binder on the manufacture of a 5A monolith. J. Powder Technol. 116, 85-96 (2001)
13. Öhrman, O., et al.: Synthesis and evaluation of ZSM-5 films on cordierite monoliths. Appl. Catal. A Gen. 270, 193-199 (2004a)
14. Öhrman, O., et al.: ZSM-5 structured catalysts coated with silicalite-1. In: Proceedings of the 14th International Zeolite Conference, Cape Town (2004b)
15. Patton, A., et al.: Use of the linear driving force approximation to guide the design of monolithic adsorbents. Chem. Eng. Res. Design A8 82, 999-1009 (2004)
16. 2 recovery from flue gas at high temperature using a hydrotalcite-like adsorbent. Ind. Eng. Chem. Res. 12, 4278-4294 (2006)
17. Ruthven, D.M.: Principles of Adsorption and Adsorption Processes. Wiley, New York (1984). Chap. 1
18. Todd, R.S.: A theoretical and experimental study of a rapid pressure swing adsorption system for air separation. PhD thesis, Monash University, Australia (2003)
19. Williams, J.L.: Monolith structures, materials, properties and uses. Catal. Today 69, 3-9 (2001)