Compression tests of cold-reduced high strength steel long columns

Research Report - University of Sydney, Department of Civil Engineering

Volumn , Issue 816, 2002, Pages 1-128

  Yang, Demao ^a   Hancock, Gregory J ^a   Rasmussen, K J R ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

Compression; High strength steel; LB section; Local buckling; Long column; Overall buckling; Pin ended

Indexed keywords

AUSTRALIA; COLD-FORMED; COLUMN DESIGN; COMPRESSION; COMPRESSION TESTS; FINITE-ELEMENT PROGRAMS; HIGH STRENGTH STEEL; HIGH STRENGTH STEEL PLATES; HIGH-STRENGTH; LB-SECTION; LOCAL BUCKLING; LOCAL INSTABILITY; LONG COLUMNS; LONG-COLUMN; LOW STRAINS; OVERALL BUCKLING; PIN-ENDED; RESEARCH PROJECTS; SHEET STEEL; SLENDER SECTIONS; TEST RESULTS; ULTIMATE LOADS;

COLUMNS (STRUCTURAL); COMPRESSION TESTING; DATA COMPRESSION; FINITE ELEMENT METHOD; OPTICAL DESIGN; PROJECT MANAGEMENT; SAFETY FACTOR; STANDARDS; STEEL; STEEL SHEET; STEEL STRUCTURES; STRENGTH OF MATERIALS; TESTING; YIELD STRESS;

STEEL RESEARCH;

EID: 52049109871     PISSN: None     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. American Iron and Steel Institute. (1997). "1996 Edition of the Specification for the Design of Cold- Formed Steel Structural Members", Washington, DC, USA.
2. American Iron and Steel Institute. (2000). "1996 Edition of the Specification for the Design of Cold-Formed Steel Structural Members, Supplement 1, July 1999", Washington, DC, USA.
3. American Society for Testing and Materials A611. (1997). "Standard Specification for Steel Sheet, Carbon, Cold-Rolled, Structural Quality", Philadelphia, PA, USA
4. American Society for Testing and Materials A653. (1997). "Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process", Philadelphia, PA, USA.
5. American Society for Testing and Materials A792. (1994). "Standard Specification for Steel Sheet, 55% Aluminium-Zinc Ally-Coated by the Hot-Dip Process", Philadelphia, PA, USA
6. Bijlaard P.P., and Fisher G.P., "Interaction of column and local buckling in compression members", NACA TN2640 1953.
7. Dewolf, J.T., Pekoz, T., and Winter, G., "Local and overall buckling of cold formed steel members", Journal of the Structural Division, ASCE, Oct., 1974.
8. Galambos, T.V., "Guide to stability design criteria for metal structures", John Wiley & Sons, Inc., 1988.
9. Graves-Smith, T.R., "The ultimate strength of columns of arbitrary length", Symposium on thin -walled steel structures, Swansea, 1967.
10. Hancock, G.J., "Nonlinear analysis of thin sections in compression" Journal of Structural Engineering, Vol.107, No.ST3,1981
11. Hibbitt, Karlsson & Sorensen, Inc., "ABAQUS/Standard User's Manual", Ver. 5.7, 1997
12. Kalyanaraman, V., Pekoz, T., and Winter, G., "Unstiffened compression elements", Journal of the Structural Division, ASCE, Sept., 1977.
13. Levy, S. Wooley, R.M., and Kroll, W.D., "Instability of simply supported square plate with reinforced circular hole in edge compression", Research Paper RP1849, Vol.39, Dec. 1947
14. Mathcad 2000 Professional, (1999), ©1989-1999 Mathsoft Inc.
15. th International Specialty Conference on Cold-Formed Steel Structures, St Louis, Missouri, Nov 1988.
16. Miller T.H., Pekoz T., "Unstiffened strip approach for perforated wall studs", Journal of Structural Engineering, Vol.120, No.2, 1994
17. Papangelis, J.P., Hancock, G.J. THIN-WALL 2.0 (1998), Center for Advanced Structural Engineering, Department of Civil Engineering, University of Sydney.
18. Pekoz, T., "Development of a unified approach to the design of cold-formed steel members", Research Report, American Iron and Steel Institute, 1986.
19. th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Missouri, Nov., 1986
20. Rogers, C.A., Hancock, G.J. (1997), "Ductility of G550 sheet steels in tension", Journal of Structural Engineering, ASCE, Vol. 123, No. 12,1586-1594.
21. Rhodes J., Harvey J.M., "Examination of plate post-buckling behaviour", Journal of the Engineering Mechanics Division, Vol.103, No. EM3, June, 1977.
22. Roger, C.A., Hancock, G.J., " Ductility of G550 sheet steels in tension-elongation measurements and perforated tests", Research Report No. R735, School of Civil and Mining Engineering, University of Sydney
23. Shanmugam, N.E. Chiew S. and Lee S., "Strength of thin-walled square steel box columns", Journal of Structural Engineering, ASCE, Vol. 113, No. 4, 818-831.
24. Standards Australia / Standards New Zealand. (1996). "Cold-formed steel structures - AS/NZS 4600", Sydney, NSW, Australia
25. Standards Australia. (1993). "Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc coated - AS 1397", Sydney, NSW, Australia
26. th International congress applied mechanics, Springerverlag, Germany, 1969.
27. Walker, A. C., "Design and analysis of cold-formed sections", International Textbook Company Limited, 1975
28. Wu, S., Yu, W.W, and LaBoube, R.A. (1996a), "Strength of flexural members using structural Grade 80 of A653 steel (deck panel tests)", Second Progress Report, Department of Civil Engineering, University of Missouri-Rolla, November.
29. th International Specialty Conference on Cold-Formed Steel Structures, St Louis, Missouri, Oct 1996, pp. 255-274.
30. Yang, D., Hancock, G.J., "Compression tests of cold-reduced high strength steel stub column", Research Report No. R815, School of Civil and Mining Engineering, University of Sydney, 2002.