Modelling of cutting and machining: 10 years of ESAFORM activity

Advances in Material Forming: Esaform 10 years on

Volumn , Issue , 2007, Pages 225-236

  Lorong, Philippe ^a   Micari, Fabrizio ^b   Touratier, Maurice ^a  

^a CNRS   (France)

^b UNIVERSITY OF PALERMO   (Italy)

Author keywords

Machining and cutting modelling

Indexed keywords

EID: 51849117140     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-2-287-72143-4_13     Document Type: Chapter

References (77)

1. M. E. Merchant, Mach. Sc. Tech. 2/2, 157-163 (1998).
2. E. J. A. Armarego, I. S. Jawahir, V. A. Ostafiev, P. K. Venuvinod, "Modeling of Machining Operations", CIRP Working Group Paper, STC-C Paris, France, 1996.
3. J. Mackerle, Int. J. Mach. Tools & Manuf. 43, 103-114 (2003).
4. A. M. Goijaerts, Y. W. Stegeman, L. E. Govaert, D. Brokken, W. A. M. Brekelmans and F. P. T. Baaijens, "Modelling of the metal blanking process", Proc. of the 1st ESAFORM Conference, 239-242 (1998).
5. H. H. Wisselink and J. Huetink, "3-D modelling of sheet metal shearing", Proc. of the 1st ESAFORM Conference, 243-246 (1998).
6. M. Vaz Jr., "Numerical Simulation of Machining Processes - a Challenge", Proc. of the 2nd ESAFORM Conference, 89-92 (1999).
7. T. Matsumura, A. Ishii, T. Shirakashi and E. Usui, "Error compensation with simulating turning process" Proc. of the 4th ESAFORM Conference, 623-626 (2001).
8. L. Masset, J. F. Debongnie and P. Beckers, "Face milling and turning simulation with the finite elements method", Proc. of the 4th ESAFORM Conference, 627-630 (2001).
9. M. Segreti, A. Moufki, D. Dudzinski and A. Molinari, "Modelling of non-linear vibrations in orthogonal cutting", Proc. of the 4th ESAFORM Conference, 647-650 (2001).
10. A. Dugas, J. J. Lee and J. Y. Hascoet, "Feed rate and tracking errors simulation in high speed milling", Proc. of the 4th ESAFORM Conference, 667-670 (2001).
11. F. Chinesta, P. Lorong, D. Ryckelynck, G. Coffignal, M. Touratier, M. A. Martinez E. Cueto and M. Doblare, "Thermomechanical cutting model discretisation: eulerian or lagrangian, mesh or meshless?", Proc. of the 5th ESAFORM Conference, 567-570 (2002).
12. J. M. A Cesar de Sa, P. M. A. Areias and R. M. Natal George, "Numerical model for cutting using a gradient damage model and element erosion", Proc. of the 5th ESAFORM Conference, 571-574 (2002).
13. P. Lorong, F. Chinesta and D. Ryckelynck, "History-dependent material and the natural element meshless method. study of two approaches in finite transformations", Proc. of the 5th ESAFORM Conference, 579-584 (2002).
14. L. Filice, F. Micari, L. Pagnotta and D. Umbrello, "Prediction and measurement of pressure distribution on the tool in orthogonal cutting", Proc. of the 5th ESAFORM Conference, 595-598 (2002).
15. T. H. C. Childs, "Numerical experiments on material properties and machining parameters influencing normal contact stresses between chip and tool", Proc. of the 6th ESAFORM Conference, 527-530 (2003).
16. T. Shirakashi, "Fem simulation analysis on ductile mode glass machining process", Proc. of the 6th ESAFORM Conference, 539-542 (2003).
17. M. Clausen and K. Tracht, "Dynamic analytical cutting force prediction", Proc. of the 6th ESAFORM Conference, 543-546 (2003).
18. M. Fontaine, A. Moufki, A. Devillez and D. Dudzinski, "Predictive modelling of cutting forces in ball-end milling", Proc. of the 6th ESAFORM Conference, 547-550 (2003).
19. A. Marty, S. Assouline, P. Lorong and G. Coffignal, "Prediction of the workpiece final surface taking into account the workpiece/tool/machne vibrations", Proc. of the 6th ESAFORM Conference, 535-538 (2003).
20. L. Masset, J. F. Debongnie and F. Berger, "Solving problems with contact in machining process simulation", Proc. of the 6th ESAFORM Conference, 555-558 (2003).
21. P. J. Arrazola, F. Meslin and S. Marya, "Tool-chip contact analysis in numerical cutting modelling", Proc. of the 6th ESAFORM Conference, 559-562 (2003).
22. O. W. Dillon, "Fem analysis of machining with a rounded tip cutting tool", Proc. of the 6th ESAFORM Conference, 563-566 (2003).
23. J. F. Mariage, K. Saanouni and P. Lestriez, "Sheet metal deburring and drilling simulation by continuum damage mechanics", Proc. of the 6th ESAFORM Conference, 571-574 (2003).
24. M. T. Santos, P. Lasne and J. L. Romero, "Application of finite elements method to the optimisation of 3d blanking processes", Proc. of the 6th ESAFORM Conference, 583-586 (2003).
25. B. Denkena, V. Jivishov and M. Clausen, "Deviation analysis of fem based cutting simulation", Proc. of the 6th ESAFORM Conference, 587-590 (2003).
26. S. Beccari, L. Filice and L. Fratini, "On the role of superimposed stress states on fracture mechanics in blanking", Proc. of the 6th ESAFORM Conference, 595-598 (2003).
27. T. Shirakashi, "Simulation on cutting process of aluminium single crystal", Proc. of the 7th ESAFORM Conference, 709-712 (2004).
28. S. Assouline, P. Lorong and G. Coffignal, "A method for simulating the machining of thinwalled taking into account their vibrations", Proc. of the 7th ESAFORM Conference, 717-720 (2004).
29. T. Matsumura, T. Shirakashi, E. Usui and T. Furuki, "On the development of a milling process simulator based on energy approach", Proc. of the 7th ESAFORM Conference, 725-728 (2004).
30. D. Umbrello, R. Shivpuri and J. Hua, "Modeling of the flow stress for AISI 52100 during hard machining processes", Proc. of the 7th ESAFORM Conference, 741-744 (2004).
31. G. Ambrogio, L. Filice and D. Umbrello, "Numerical analysis of the fracture surface in thick sheets blanking", Proc. of the 7th ESAFORM Conference, 757-760 (2004).
32. R. Hambli, "Numerical modeling of sheet metal blanking processes", Proc. of the 7th ESAFORM Conference, 761-764 (2004).
33. B. Denkena, K. Tracht and M. Clausen, "Dynamic simulation of oblique turning processes", Proc. of the 7th ESAFORM Conference, 765-768 (2004).
34. L. Filice, D. Umbrello, F. Micari and L. Settineri, "On the finite element simulation of thermal phenomena in machining processes", Proc. of the 8th ESAFORM Conference, 729-732 (2005).
35. W. W. Wenzl and S. Treml, "Simulation of the blanking process of aluminium sheet using the engineering software deform", Proc. of the 8th ESAFORM Conference, 741-744 (2005).
36. Y. Guetari, S. Le Corre and N. Moes, "Study on the X-FEM method possibilities for the simulation of machining", Proc. of the 8th ESAFORM Conference, 745-748 (2005).
37. V. Lemiale, P. Picart and J. Chambert, "Comparison of different fracture models for the metal blanking process", Proc. of the 8th ESAFORM Conference, 749-752 (2005).
38. T. Matsumura, T. Shirakashi, E. Usui and I. Hori, "Simulation of drilling process base on energy approach", Proc. of the 8th ESAFORM Conference, 757-760 (2005).
39. K. Tracht, B. Denkena, M. Clausen and J. H. Yu, "Dexel-based milling simulation", Proc. of the 8th ESAFORM Conference, 765-768 (2005).
40. L. Donati, G. Tani and L. Tomesani, "2D orthogonal cutting simulation of C15 steel", Proc. of the 8th ESAFORM Conference, 769-772 (2005).
41. L. Filice, F. Micari, S. Rizzuti and D. Umbrello, "On the correlations between friction model and predicted temperature distribution in orthogonal cutting", Proc. of the 8th ESAFORM Conference, 599-602 (2005).
42. J. V. Le Lan, L. Masset, A. Marty and J. F. Debongnie, "An efficient simulation tool for predicting chatter during cutting operations", Proc. of the 9th ESAFORM Conference, 607-610 (2006).
43. T. Matsumura, T. Shirakashi and E. Usui, "Prediction of milling process based on 2D FEM simulation", Proc. of the 9th ESAFORM Conference, 623-626 (2006).
44. S. C. Assouline, P. Lorong and G. Coffignal, "Accounting workpiece flexibility in macroscopic machining simulations", Proc. of the 9th ESAFORM Conference, 627-630 (2006).
45. G. Coffignal, F. Lapujoulade, J. L. Lebrun and M. Touratier, "Trends in computational and experimental methods in materials cutting", Proc. of the 1st ESAFORM Conference, 231-234 (1998).
46. E. Ceretti, L. Filice and F. Micari, "Analysis of the chip geometry in orthogonal cutting of mild steel", Proc. of the 4th ESAFORM Conference, 607-610 (2001).
47. J. L. Bacaria, O. Dalverny, O. Pantalè, R. Rakotomalala and S. Caperaa, "Transient numerical models of discontinuous chip formation based on a damage effect", Proc. of the 4th ESAFORM Conference, 611-614 (2001).
48. J. C. Hamann, F. Meslin and S. Donyo, "Phenomenological modeling of chip segmentation using the catastrophe theory", Proc. of the 4th ESAFORM Conference, 659-662 (2001).
49. E. S. Dzidowski and G. Chrushielski, "Mesoscopic-macroscopic model of chip formation during machining in quasi-isothermal conditions", Proc. of the 6th ESAFORM Conference, 523-526 (2003).
50. T. Mabrouki, L. Deshayes and J. F. Rigal, "On the modelling of serrated chip formation", Proc. of the 7th ESAFORM Conference, 713-716 (2004).
51. T. Shirakashi, T. Obikawa and J. Shinozuka, "Simulation analysis on chip breaking process by grooved tool", Proc. of the 8th ESAFORM Conference, 733-736 (2005).
52. M. Ancau, "Numerical modeling of the chip geometry in end milling operation", Proc. of the 8th ESAFORM Conference, 773-776 (2005).
53. R. Rossi, E. Sermet, G. Poulachon, J. L. Lebrun, O. W. Dillon, K. Saito and I. J. Jawahir, "Numerical and experimental studies on tool temperature distribution in machining with flat-faced and grooved tools", Proc. of the 4th ESAFORM Conference, 615-618 (2001).
54. F. Meslin and J. C. Hamann, "Experimental observation and modeling of tool-chip interface phenemena", Proc. of the 4th ESAFORM Conference, 619-622 (2001).
55. J. L. Alcaraz, L. N. Lopez de Lacalle, A. Lamikiz and A. Escudero, "Simulation of thermal enhanced machining", Proc. of the 4th ESAFORM Conference, 663-666 (2001).
56. W. Grzesik, "Thermal and frictional characterization of the tool-chip interface for assessment of the process performance", Proc. of the 5th ESAFORM Conference, 587-590 (2002).
57. T. Matsumura, T. Shirakashi, T. Obikawa and E. Usui, "On the development of cutting process simulator for turnig operation", Proc. of the 6th ESAFORM Conference, 519-522 (2003).
58. G. Germain, P. Robert, J. L. Lebrun, P. Dal Santo and A. Poitou, "Experimental and numerical approaches of laser assisted turning", Proc. of the 7th ESAFORM Conference, 721-724 (2004).
59. W. Grzesik, P. Nieslony and B. Bartoszuk, "A model for the cutting heat partitioning in multilayer coating-stell couples", Proc. of the 7th ESAFORM Conference, 749-752 (2004).
60. P. Carlone, C. Cataldo and G. S. Palazzo, "A finite element three dimensional approach to metal evaporative laser cutting: temperature field non-linear model", Proc. of the 8th ESAFORM Conference, 753-756 (2005).
61. A. Aguiar Vieira, A. Monteiro Baptista, R. Natal George and M. Lages Parente, "Experimental and fem study of the temperature field during superficial grinding", Proc. of the 8th ESAFORM Conference, 761-764 (2005).
62. O. W. Dillon, K. C. Ee, P. C. Wanigarathne, I. S. Jawahir and J. C. Outeiro, "Temperature and residual stresses in orthogonal machining", Proc. of the 9th ESAFORM Conference, 603-606 (2006).
63. M. Nouari and A. Molinari, "Modelling of tool wear and optimization of the cutting process", Proc. of the 4th ESAFORM Conference, 643-646 (2001).
64. T. Shirakashi, "Some difficulties on prediction of tool life and machined surface quality through FEM", Proc. of the 5th ESAFORM Conference, 583-586 (2002).
65. J. Hua, P. Mittal and R. Shivpuri, "An FEM based thermal diffusion model for crater wear in machining", Proc. of the 6th ESAFORM Conference, 531-534 (2003).
66. F. Micari, L. Filice and D. Umbrello, "Preliminary analysis of the predictive capability of a wear model in machining", Proc. of the 6th ESAFORM Conference, 575-578 (2003).
67. G. Casalino, S. Campanelli, A. D. Ludovico and E. Stasolla, "Numerical simulation of single point turning operation", Proc. of the 9th ESAFORM Conference, 619-622 (2006).
68. T. Shirakashi, T. Obikawa and H. Sasahara, "Estimation of the residual stress distribution in machined surface and its control through fem simulation", Proc. of the 4th ESAFORM Conference, 639-642 (2001).
69. D. Umbrello, J. Hua, R. Shivpuri, F. Hashimoto and X. Cheng, "Numerical investigation of effect of hard turning on residual stress distribution of shot peened surface", Proc. of the 8th ESAFORM Conference, 725-728 (2005).
70. G. Ambrogio, L. Filice, D. Umbrello, R. Shivpuri and J. Hua, "Application of NN technique for predicting the residual stress profiles during hard turning of AISI 52100 steel", Proc. of the 9th ESAFORM Conference, 595-598 (2006).
71. G. Giorleo, L. Carrino, W. Polini, U. Prisco, "Topography of turned surfaces", Proc. of the 6th ESAFORM Conference, 551-554 (2003).
72. A. Moufki, A. Molinari, D. Dudzinski, "An analytical thermomechanical modelling of chip three-dimensional formation with complex tool. Application to bar turning", Proc. of the 6th ESAFORM Conference, 567-570 (2003).
73. K. Saanouni, J. F. Mariage, A. Cherouat, "Sheet metal cutting simulation by continuum damage mechanics", Proc. of the 5th ESAFORM Conference, 575-578 (2002).
74. V. Lemiale, P. Picart, S. Meunier, "Numerical modelling of blanking process for thin sheet metal parts", Proc. of the 5th ESAFORM Conference, 559-562 (2002).
75. B. Changeux, M. Touratier, J. L. Lebrun, T. Tomas, J. Clisson, "High speed shear stress for the identification of the Johnson-Cook law", Proc. of the 4th ESAFORM Conference (2001).
76. P. Bariani, G. A. Berti, S. Corazza, "Analysis of material behaviour at high strain rates for modelling machining processes", Proc. of the 4th ESAFORM Conference (2001).
77. M. E. Merchant, "Mechanics of the metal cutting process", J. of Applied Physics, Vol. 16, no6, 318-324, 1945.