Structuring of embodiment design problem based on the product lifecycle

International Journal of Product Development

Volumn 2, Issue 1-2, 2005, Pages 47-70

  Scaravetti, Dominique ^a   Nadeau, Jean Pierre ^a   Pailhès, J érôme ^a   Sebastian, Patrick ^a  

^a ARTS ET MÉTIERS PARISTECH   (France)

Author keywords

CSP; decision support system; design problem analysis; embodiment design; layout; product life cycle requirements; structuring elements

Indexed keywords

EID: 51749088676     PISSN: 14779056     EISSN: 17418178     Source Type: Journal    
DOI: 10.1504/ijpd.2005.006668     Document Type: Article

References (40)

1. AFNOR – Association Française de NORmalisation (1990–1991) NF X50-150 & 151 Analyse de la Valeur, Analyse Fonctionnelle: Vocabulaire – NF X50-152 Analyse de la Valeur, Caractéristiques Fondamentales, AFNOR editions, Paris.
2. Altshuller, G. (1984) Creativity as an Exact Science, Gordon and Breach Science Publishing House, New York.
3. Aoussat, A. (1990) La Pertinence en Innovation: Nécessité d'un Approche Plurielle, PhD thesis, Ensam, Paris.
4. Ashby, M.F. (2000) Choix des Matériaux en Conception Mécanique, translated from English, Dunod (Ed.), Paris.
5. Bashir, H. and Thompson, V. (1999) ‘Estimating design complexity’, Journal of Engineering Design, Vol. 10, No. 3, pp.247–257.
6. Bouchama, A., Sebastian, P. and Nadeau, J.P. (2003) ‘Flash evaporation, modelling and constraint formulation’, Trans. I. Chem E., Part A., Vol. 81, pp.1250–1258.
7. Brent, A.C. and Visser, J.K. (2004) ‘An environmental performance resource impact indicator for life cycle management in the manufacturing industry’, Journal of Cleaner Production, Vol. 13, No. 6, pp.557–565.
8. Cavailles, J. (1995) Méthodes de Management de Programme, 2nd ed., DGA-Teknea.
9. CEN, European Committee for Standardization (2000) European Standards: Packaging Requirements EN13427, 13428, CEN, http://www.cenorm.be.
10. Chakrabarti, A., Bccgh, T.P. and Holden, T. (1992) ‘Towards a decision-support framework for the embodiment phase of mechanical design’, Artificial Intelligence in Engineering, No. 7.
11. Desroches, A. (1999) ‘Aspects conceptuels des risques’, Proceedings of PRIMECA Le Risque, la Sûreté de Fonctionnement, la Fiabilité en Phase de Conception des Produits et des Systèmes, Paris.
12. Dieter, G.E. (2000) Engineering Design – A Materials and Processing Approach, 3rd ed., McGraw-Hill International Editions, New York.
13. Dore, R., Fischer, X., Nadeau, J.P. and Pailhes, J. (2003) ‘Méthodologie avancée pour la conception conforme utilisateur’, Proceedings of AIP-PRIMECA, La Plagne.
14. Fischer, X., Nadeau, J.P., Sebastian, P. and Joyot, P. (2002) ‘Qualitative constraints in integrated design’, in Chedmail, P. et al. (Ed.): Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publisher, pp.35–42.
15. Garin, H. (1994) AMDEC/MADE/AEEL – L’Essentiel de la Méthode, AFNOR editions, Paris.
16. Grenouilleau, J.C., Desroches, A., Dejax, P. and Peres, F. (1999) ‘Analyse des risques opérationnels liés à la gestion des éléments de rechange d'un système spatial complexe en phase de conception’, Proceedings of PRIMECA Le Risque, la Sûreté de Fonctionnement, la Fiabilité en Phase de Conception des Produits et des Systèmes, Paris.
17. Hicks, B.J. and Culley, S.J. (2002) ‘An integrated modelling environment for the embodiment of mechanical systems’, Computer-Aided Design, Vol. 34, No. 6, pp.435–451.
18. Janin, M. (2000) Démarche D'éco-Conception en Entreprise – Un Enjeu: Construire la Cohérence Entre Outils et Processus, PhD thesis, Ensam, Chambery.
19. Landy, G. (2002) AMDEC Guide Pratique, AFNOR editions, Paris.
20. Larson, N. and Kusiak, A. (1996) ‘Managing design processes: a risk assessment approach’, IEEE Transactions on Systems, Man and Cybernetics, Vol. 26, No. 6, pp.749–759.
21. Leroy, A. and Signoret, J.P. (1992) Le Risque Technologique, Presses Universitaires de France, Paris.
22. Ligeron, J.C. and Lyonnet, P. (1992) Fiabilité en Exploitation, Lavoisier editions, Paris.
23. MAL’IN (2003) Méthodes d'Aide à L'INnovation (Methods for Innovation Aid), http://www.lept-ensam.u-bordeaux.fr/malin, Trefle-Ensam, Bordeaux.
24. Matthews, P.C., Blessing, L.T.M. and Wallace, K.M. (2002) ‘The introduction of a design heuristics extraction method’, Advanced Engineering Informatics, No.16, pp.3–19.
25. Millet, D. (2003) Intégration de L'environnement en Conception – L'entreprise et le Développement Durable, Lavoisier, Hermes Sciences.
26. Monchy, F. (2000) Maintenance, Méthodes et organisation, Dunod (Ed.), Paris.
27. Pahl, G. and Beitz, W. (1996) Engineering Design: A Systematic Approach, 2nd ed., Springer-Verlag, Londres.
28. Prudhomme, G., Zwolinski, P. and Brissaud, D. (2003) ‘Integrating into the design process the needs of those involved in the product life-cycle’, Journal of Engineering Design, Vol. 14, No. 3, pp.333–353.
29. Sarbacker, S.D. and Ishii, K. (1997) ‘A framework for evaluating risk in innovative product development’, Proceedings of the ASME Design Engineering Technical Conference, Sacramento.
30. Savransky, S.D. (2000) Engineering of Creativity: Introduction to TRIZ Methodology of Inventive Problem Solving, CRC Press, New York.
31. Scaravetti, D., Nadeau, J.P. and Sebastian, P. (2003) ‘Structuring functions and constraints formulation; for an enhanced embodiment design’, Proceedings of International CIRP Design Seminar, Grenoble.
32. Scaravetti, D., Nadeau, J.P., Sebastian, P. and Pailhes, J. (2004) ‘Aided decision-making for an embodiment design problem’, Proceedings of International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath.
33. Sebastian, P. (2003) Approximation et Intégration de Modèles Pour L’aide à la Décision en Génie des Procédés, Mémoire d’Habilitation à Diriger des Recherches, Université Bordeaux 1.
34. Taguchi, G.S. (2003) Key Concepts for Robust Engineering Using Taguchi Methods, American Supplier Institute, Séminaire sur les méthodes Taguchi, Ensam, Paris.
35. Tate, D. and Nordlund, M. (1996) ‘A design process roadmap as a general tool for structuring and supporting design activities’, Proceedings of the 2nd World Conference on Integrated Design and Process Technology, Austin.
36. Theodosiou, G. and Sapidis, N.S. (2004) ‘Information models of layout constraints for product life-cycle management: a solid-modelling approach’, Computer-Aided Design, Vol. 36, No. 6, pp.549–564.
37. Ullman, D.G. (2003) The Mechanical Design Process, 3rd ed., McGraw-Hill, New York.
38. Verfaillie, H.A. and Bidwell, R. (2000) ‘Measuring eco-efficiency – a guide to reporting company performance’, World Business Council for Sustainable Development, Switzerland, http://www. gdrc.org/sustbiz/wbcsd.html.
39. Yannou, B. (2001) Préconception de Produits, Mémoire d’Habilitation à Diriger des Recherches, INPG.
40. Zimmer, L. and Zablit, P. (2001) ‘Global aircraft predesign based on constraint propagation and interval analysis’, Proceedings of Ceas Conference on Multidisciplinary Aircraft Design and Optimisation, Köln.